Tritium levels in Chinese cabbage and radish plants acutely exposed to HTO vapor at different growth stages

To simulate an acute exposure of Chinese cabbage and radish plants to airborne HTO, the potted plants were exposed to HTO vapor under semi-outdoor conditions for 1h at different times from the early to late growth stages. The plants were grown outdoors and the plant tritium was measured at the end of an exposure (h(0)) and at harvest. The leaf tissue free water tritium (TFWT) concentrations at h(0) were considerably lower than estimated equilibrium concentrations. In the leaves of Chinese cabbage, the exposure at the earlier growth stage generally ended with a higher TFWT concentration. Such a tendency was not apparent either in the leaves or roots of radish. On the other hand, the earlier stage exposure gave rise to lower TFWT concentrations at the harvest of both crops. For the OBT (organically bound tritium), however, the same occurred only in the Chinese cabbage leaves. During the period between the exposure and harvest, the TFWT concentrations reduced by factors of up to 1.1 x 10(6) for the Chinese cabbage leaves and 1.3 x 10(4) for the radish roots. Based on the activity ratios of OBT to TFWT at harvest, it is estimated that OBT mostly contributes much more to the ingestion dose than TFWT does.     

Isolation of Salmonella typhimurium Tn5 mutants defective for survival on egg shell surface using transposon footprinting

The objective of this study was to screen the genome of Salmonella typhimurium for genes potentially required for survival on egg shell surfaces using a novel transposon footprinting method based on a previously developed Tn5 mutagenesis technique. Since the amplified DNA fragment length should usually be unique for each mutant, the polymerase chain reaction products separated on an agarose gel generate a transposon footprint with each band in the footprint representing the corresponding Tn5 mutant. By comparing the footprints from the pools of S. typhimurium Tn5 mutants before and after inoculation on egg shell surfaces, Tn5 mutants not recovered after selection were rapidly identified for potential isolation and genetic analysis.     

Effects of ozonation and coagulation on effluent organic matter characteristics and ultrafiltration membrane fouling

Effluent organic matter （EfOM） is the major cause of fouling in the low pressure membranes process for wastewater reuse. Coagulation and oxidation of biological wastewater treatment effluent have been applied for the fouling control of microfiltration membranes. However, the change in EfOM structure by pre-treatments has not been clearly identified. The changes of EfOM characteristics induced by coagulation and ozonation were investigated through size exclusion chromatography, UV/Vis spectrophotometry, fluorescence spectrophotometry and titrimetric analysis to identify the mechanisms in the reduction of ultrafiltration （UF） membrane fouling. The results indicated that reduction of flux decline by coagulation was due to modified characteristics of dissolved organic carbon （DOC） content. Total concentration of DOC was not reduced by ozonation. However, the mass fraction of the molecules with molecular weight larger than 5 kDa, fluorescence intensity, aromaticity, highly condensed chromophores, average molecular weight and soluble microbial byproducts decreased greatly after ozonation. These results indicated that EfOM was partially oxidized by ozonation to low molecular weight, highly charged compounds with abundant electron- withdrawing functional groups, which are favourable for alleviating UF membrane flux decline.     

Service life of sewage culvert with bacteria coating from waste sludge and negative pressure method

Journal of Material Cycles and Waste Management - In this study, a bacteria coating resistant to sulfate attack using materials with bacteria immobilization has been developed. For core coating...     

The role of hydrodynamics, matrix and sampling duration in passive sampling of polar compounds with Empore SDB-RPS disks

There is an increasing need to monitor concentrations of polar organic contaminants in the aquatic environment. Integrative passive samplers can be used to assess time weighted average aqueous concentrations, provided calibration data are available and sampling rates are known. The sampling rate depends on environmental factors, such as temperature and water flow rate. Here we introduce an apparatus to investigate the sampling properties of passive samplers using river-like flow conditions and ambient environmental matrices: river water and treated sewage effluent. As a model sampler we selected Empore SDB-RPS disks in a Chemcatcher housing. The disks were exposed for 1 to 8 days at flow rates between 0.03 and 0.4 m s(-1). Samples were analysed using a bioassay for estrogenic activity and by LC-MS-MS target analysis of the pharmaceuticals sulfamethoxazole, carbamazepine and clarithromycin. In order to assess sampling rates of SDB disks, we also measured aqueous concentrations of the pharmaceuticals. Sampling rates increased with increasing flow rate and this relationship was not affected by the environmental matrix. However, SDB disks were only sampling in the integrative mode at low flow rates <0.1 m s(-1) and/or for short sampling times. The duration of linear uptake was particularly short for sulfamethoxazole (1 day) and longer for clarithromycin (5 days). At 0.03 m s(-1) and 12-14 degrees C, the sampling rate of SDB disks was 0.09 L day(-1) for clarithromycin, 0.14 L day(-1) for sulfamethoxazole and 0.25 L day(-1) for carbamazepine. The results show that under controlled conditions, SDB disks can be effectively used as passive sampling devices.     

Characteristics of products and PCDD/DF emissions from a pyrolysis process of urethane/styrofoam waste from electrical home appliances

A plastic fraction consisting mainly of polyurethane/styrofoam waste is generated after separating valuable spare parts and metals from used electrical home appliances. In Korea, such waste is currently incinerated in cement kilns or is landfilled. However, owing to its high volatile matter content, conversion into gaseous or liquid pyrolysis products is a preferable alternative. A pyrolysis process of polyurethane and styrofoam waste from electrical home appliances was evaluated by characterizing the products generated at 500°–800°C. The para meters determined were the yields of gas, oil, and char; the characteristics of the remaining char; and the con centration of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzo-furans in the product gas. As expected, the char yield decreased at higher temperatures, whereas gas and oil yields showed increasing tendency. The oil products could be used as storable fuels with a calorific value of 6000–8000 kcal/kg. Fine pores were observed in the char. The adsorption and decolorizing ability of the char were almost the same as those of activated carbon, so that pyrolysis char has potential for use as a sorbent. Further feasibility studies will be needed before utilizing pyrolysis technology to recover either fuels or usable products from polyurethane/styrofoam waste.     

Phosphorous in the environment: characteristics with distribution and effects,removal mechanisms,treatment technologies,and factors affecting recovery as minerals in natural and engineered systems

Environmental Science and Pollution Research - Phosphorus (P), an essential element for living cells, is present in different soluble and adsorbed chemical forms found in soil, sediment, and water....     

Modeling uptake kinetics of cadmium by field-grown lettuce

Cadmium uptake by field grown Romaine lettuce treated with P-fertilizers of different Cd levels was investigated over an entire growing season. Results indicated that the rate of Cd uptake at a given time of the season can be satisfactorily described by the Michaelis-Menten kinetics, that is, plant uptake increases as the Cd concentration in soil solution increases, and it gradually approaches a saturation level. However, the rate constant of the Michaelis-Menten kinetics changes over the growing season. Under a given soil Cd level, the cadmium content in plant tissue decreases exponentially with time. To account for the dynamic nature of Cd uptake, a kinetic model integrating the time factor was developed to simulate Cd plant uptake over the growing season: C Plant=C Solution.PUF max.exp[-b.t], where C Plant and C Solution refer to the Cd content in plant tissue and soil solution, respectively, PUF max and b are kinetic constants.