The release of lindane from contaminated building materials

The release of the organochlorine pesticide lindane (γ-hexachlorocyclohexane) from several types of contaminated building materials was studied to assess inhalation hazard and decontamination requirements in response to accidental and/or intentional spills. The materials included glass, polypropylene carpet, latex-painted drywall, ceramic tiles, vinyl floor tiles, and gypsum ceiling tiles. For each surface concentration, an equilibrium concentration was determined in the vapour phase of the surrounding air. Vapor concentrations depended upon initial surface concentration, temperature, and type of building material. A time-weighted average (TWA) concentration in the air was used to quantify the health risk associated with the inhalation of lindane vapors. Transformation products of lindane, namely α-hexachlorocyclohexane and pentachlorocyclohexene, were detected in the vapour phase at both temperatures and for all of the test materials. Their formation was greater on glass and ceramic tiles, compared to other building materials. An empiric Sips isotherm model was employed to approximate experimental results and to estimate the release of lindane and its transformation products. This helped determine the extent of decontamination required to reduce the surface concentrations of lindane to the levels corresponding to vapor concentrations below TWA.     

经济发达地区镇域农村居民点演变驱动力空间差异研究

采用Logistic回归分析法、对比分析法等,以地处经济发达地区的陆渡镇及浏河镇为例,从镇域尺度探讨农村居民点演变驱动机理及其空间差异。结果显示：（1）两镇农村居民点减少的一般因素中农民人均纯收入、人均居民点面积均具有正向作用,到城镇的距离具有负向作用,3者作用大小具有区域差异,农村工业发展及到公路的距离对不同地区作用方向不同;而粮食产量仅对陆渡镇有负向作用;（2）两镇农村居民点增加的一般因素中农民人均纯收入、农业发展均具有正向作用,而到公路的距离、基本农田则具有负向作用,4者作用方向及程度排序一致;而除一般因素及到城镇的距离外的其他因素均为特殊因素。研究表明,农村居民点变化驱动力及其作用程度与方向具有区域差异性;为优化农村居民点布局,应把握不同地区农村居民点演变驱动力机理的空间差异,制定差别化政策措施     

High throughput and miniaturised systems for biodegradability assessments

The society demands safer products with a better ecological profile. Regulatory criteria have been developed to prevent risks for human health and the environment, for example, within the framework of the European regulation REACH (Regulation (EC) No 1907, 2006). This has driven industry to consider the development of high throughput screening methodologies for assessing chemical biodegradability. These new screening methodologies must be scalable for miniaturisation, reproducible and as reliable as existing procedures for enhanced biodegradability assessment. Here, we evaluate two alternative systems that can be scaled for high throughput screening and conveniently miniaturised to limit costs in comparison with traditional testing. These systems are based on two dyes as follows: an invasive fluorescent dyes that serves as a cellular activity marker (a resazurin-like dye reagent) and a noninvasive fluorescent oxygen optosensor dye (an optical sensor). The advantages and limitations of these platforms for biodegradability assessment are presented. Our results confirm the feasibility of these systems for evaluating and screening chemicals for ready biodegradability. The optosensor is a miniaturised version of a component already used in traditional ready biodegradability testing, whereas the resazurin dye offers an interesting new screening mechanism for chemical concentrations greater than 10 mg/l that are not amenable to traditional closed bottle tests. The use of these approaches allows generalisation of high throughput screening methodologies to meet the need of developing new compounds with a favourable ecological profile and also assessment for regulatory purpose.     

Fast characterization of non domestic load in urban wastewater networks by UV spectrophotometry

Urban wastewater treatment plant efficiency, as well as biosolid quality, depends on urban wastewater quality, which can be affected by non domestic discharges (industrial, commercial etc.). The characterization of wastewater quality and non domestic discharge is complex, expensive and time consuming. However, these discharges must be controlled and reduced if possible. The development of a simple and fast methodology, namely based on alternative methods such as UV spectrophotometry, has been carried out and applied to different areas of a medium sized town of Southern Québec (Canada). Several autosamplers and on line/on site measurements have been used in critical control points of the network areas, for a dry weather campaign in four areas (industrial, commercial, hospital and university). The flow rate study, completed by the exploitation of conductivity measurements and the qualitative examination of UV spectra allows the discrimination of non domestic loads and their variability study from one point to another. The identification of critical discharges and organic shock loads has been possible with low investment, and mitigation actions have been proposed.     

Agricultural practices in grasslands detected by spatial remote sensing

The major decrease in grassland surfaces associated with changes in their management that has been observed in many regions of the earth during the last half century has major impacts on environmental and socio-economic systems. This study focuses on the identification of grassland management practices in an intensive agricultural watershed located in Brittany, France, by analyzing the intra-annual dynamics of the surface condition of vegetation using remotely sensed and field data. We studied the relationship between one vegetation index (NDVI) and two biophysical variables (LAI and fCOVER) derived from a series of three SPOT images on one hand and measurements collected during field campaigns achieved on 120 grasslands on the other. The results show that the LAI appears as the best predictor for monitoring grassland mowing and grazing. Indeed, because of its ability to characterize vegetation status, LAI estimated from remote sensing data is a relevant variable to identify these practices. LAI values derived from the SPOT images were then classified based on the K-Nearest Neighbor (KNN) supervised algorithm. The results points out that the distribution of grassland management practices such as grazing and mowing can be mapped very accurately (Kappa index?=?0.82) at a field scale over large agricultural areas using a series of satellite images.     

Polar organic chemical integrative sampler (POCIS): application for monitoring organic micropollutants in wastewater effluent and surface water

In this paper, we discuss the advantages and drawbacks of POCIS (Polar Organic Chemical Integrative Sampler) for the evaluation of river water quality downstream of wastewater treatment plants. POCIS proved well adapted to sampling alkylphenols and several pharmaceuticals. Concentration factors and the decrease in limits of quantification, compared to grab water sample analyses, were significant except for hormones, β-blockers and bronchodilators. Promising preliminary results obtained in situ on deuterated atenolol used as a performance reference compound need to be confirmed in-lab. This work confirms that POCIS is a valuable tool for monitoring hydrophilic organic molecules in river and wastewaters.     

Assessment of potential health risk for inhabitants living near a former lead smelter. Part 2: site-specific human health risk assessment of Cd and Pb contamination in kitchen gardens

Metal contamination of urban soils and homegrown products has caused major concern. In Part 1, we investigated the long-term effects of a former smelter on the degree of kitchen garden-soil contamination and the quality of the homegrown vegetables from these gardens. The results showed that the soils retained a high level of contamination and that a large proportion of the vegetables produced did not comply with the legislation on the levels of metals allowed for human consumption. The present study aims to assess the associated potential health risk to local inhabitants through consumption of homegrown vegetables and ingestion of soil particles using a land use-based approach. For lead (Pb), the standard hazard quotient (HQ)-based risk assessment method was used to determine the HQ. For cadmium (Cd), the approach consisted of calculating the HQs and then deriving site-specific assessment criteria (SSAC) using the SNIFFER method. The results suggested that the exposure pathways considered should not engender any form of deleterious health effects for adults. For children, Pb was the main concern and induced a relatively high health risk through soil particle ingestion, and most total soil Cd concentrations exceeded the derived SSAC, in particular, through consumption of vegetables. The metal bioaccessibility in soils was incorporated into the methods to establish more realistic risk assessment measures. This study proposes an approach to integrate different human health risk assessment methods. Further investigations should complete the assessment to improve risk determination, e.g., the determination of metal bioaccessibility in vegetables.     

A phycocyanin probe as a tool for monitoring cyanobacteria in freshwater bodies

In many countries, the presence of cyanobacteria in freshwater bodies used for both drinking water and recreational purposes is under increasing public health attention. Water managers are considering how to implement monitoring that leads to a minimization of the risks incurred by the users of potentially contaminated sites. To address this question, this study involved assessing the performance of a submersible probe for measuring phycocyanin-specific fluorescence as a function of cyanobacterial biomass, with the aim of applying it as a tool for surveillance management. Its advantages and limits compared to more traditional analyses are discussed. The monitoring of cyanobacteria in the water bodies of western France was carried out using a minifluorimeter specific to the fluorescence of phycocyanin, a pigment specific to cyanobacteria. The results are compared with the analyses recommended by the World Health Organisation (chlorophyll a and cell counting). This study based on nearly 800 samples shows a significant correlation between the phycocyanin content and the cyanobacterial biomass, expressed as the number of cells per mL (R2 = 0.73). This submersible probe is simple and rapid to use, making it possible to take into account horizontal and vertical heterogeneities in the proliferation growth. In this way, we are able to detect at an early stage the conditions that could potentially lead to a risk, in order to start sampling. Due to its sensitivity, this tool proves suitable for monitoring aimed at reducing the risks incurred by the users of contaminated sites and launching preventative actions. The use of the phycocyanin probe provides an effective tool to complement traditional analyses of cyanobacterial presence. It is suggested that a surveillance protocol based on phycocyanin concentration can significantly improved the accuracy of the extent of cyanobacterial bloom development in the light of spatial and temporal variabilities associated with these occurrences.     

The effect of the number of counted traverses on the estimation of the total spore count sampled on a non-cultivable slit impactor

Various counting rules are used for spore trap analysis. Partial count can lead to concentration errors. This paper demonstrates that the number of traverses counted affects the final results.