Kinetics and reversibility of micropollutant sorption in sludge

The fate of micropollutants throughout wastewater treatment systems is highly dependent on their sorption interactions with sludge matter. In this study, both the sorption and desorption kinetics of polycyclic aromatic hydrocarbons (PAHs) in activated sludge were shown to be very rapid in comparison to biodegradation kinetics. It was concluded that PAH transfer does not limit their biodegradation and that their fate is governed by the sorption/desorption equilibrium state. The effect of contact time between sludge and PAHs was also investigated. It was shown that aging did not influence the sorption/desorption equilibrium although PAH losses during aging suggest that sequestration phenomena had occurred. This implies that for PAH sorption assessment within treatment processes there is no need to include a contact time dimension. As a consequence, thanks to an innovative approach taking into account sorption equilibria and sequestration, this work has demonstrated that studies in the literature which, in main, deal with micropollutant sorption in sewage sludge with only a short contact time can be extrapolated to real systems in which sorption, desorption and aging occur.     

Economic Analysis of Summer Fallow Management to Reduce Take-All Disease and N Leaching in a Wheat Crop Rotation

This paper addresses the question of summer cover-crop adoption by farmers in presence of a risk of yield loss due to take-all disease and climate variability. To analyze the public incentives needed to encourage farmers to adopt summer cover crops as a means of reducing N leaching, we combine outputs from an economic, an epidemiological and an agronomic model. The economic model is a simple model of choice under risk. The farmer is assumed to choose among a range of summer fallow managements and input uses on the basis of the expected utility criterion (HARA assumption) in presence of both climate and take-all risks. The epidemiological model proposed by Ennaïfar et al. (Eur J Plant Pathol 118:127–143, 2007) is used to determine the impact of take all on yields and N uptake. The crop-soil model (STICS) is used to compute yield developments and N leaching under various management options and climatic conditions. The input parameters are chosen to match the conditions prevailing in Grignon, located in the main wheat-growing area in France. Eight management systems are examined: four summer fallow managements: ‘wheat volunteers’ (WV), ‘bare soil’ (BS), ‘early mustard’, ‘late mustard’, and two input intensities. We show that the optimal systems are BS (WV) when the take-all risk is (not) taken into account by agents. We then compute the minimum payment to each system such that it emerges in the optimum. We thus derive the required amounts of transfer needed to trigger catch-crop adoption. The results of the Monte Carlo sensitivity analysis show that the ranking of management systems is robust over a wide range of input parameters.     

High throughput analysis of solid-bound endocrine disruptors by LDTD-APCI-MS/MS

The development of a high-throughput method for the analysis of 14 endocrine-disrupting substances in environmental solid matrices has been investigated. Selected compounds were: hormones (estrogens and progestogens), parabens and triclocarban. The ultrafast method (15 s per sample) is based on the laser diode thermal desorption-atmospheric pressure chemical ionization (LDTD-APCI) coupled to tandem mass spectrometry (MS/MS). This novel approach was tested and validated in three different solid matrices (municipal sludge cakes, aquatic sediments and agricultural soils) and its performance was evaluated by estimation of extraction recovery, linearity, precision, and detection limits. In contrast to other methods based on LC-MS/MS, a cleanup step is not necessary or minimal for the municipal sludge cake matrix. Extraction recoveries ranged from 80 to 109% for all compounds in all matrix types except for estriol which was 60-75%. The intra- and inter-day precisions, as indicated by % RSD, were ≤ 14% and ≤ 16%, respectively. The method detection limits ranged from 0.7 to 4.0 ng g?1 in sediments and soil matrices and 2.8 to 16.8 ng g?1 for municipal sludge cake samples. The results for real environmental samples collected in different areas of Quebec (Canada) are illustrated.     

Spatio-temporal variability of solid, total dissolved and labile metal: passive vs. discrete sampling evaluation in river metal monitoring

In order to obtain representative dissolved and solid samples from the aquatic environment, a spectrum of sampling methods are available, each one with different advantages and drawbacks. This article evaluates the use of discrete sampling and time-integrated sampling in illustrating medium-term spatial and temporal variation. Discrete concentration index (CI) calculated as the ratio between dissolved and solid metal concentrations in grab samples are compared with time-integrated concentration index (CI) calculated from suspended particulate matter (SPM) collected in sediment traps and labile metals measured by the diffusive gel in thin films (DGT) method, collected once a month during one year at the Seine River, upstream and downstream of the Greater Paris Region. Discrete CI at Bougival was found to be significantly higher than at Triel for Co, Cu, Mn, Ni and Zn, while discrete metal partitioning at Marnay was found to be similar to Bougival and Triel. However, when using time-integrated CI, not only was Bougival CI significantly higher than Triel CI, CI at Marnay was also found to be significantly higher than CI at Triel which was not observed for discrete CI values. Since values are time-averaged, dramatic fluctuations were smoothed out and significant medium-term trends were enhanced. As a result, time-integrated concentration index (CI) was able to better illustrate urbanization impact between sites when compared to discrete CI. The impact of significant seasonal phenomenon such as winter flood, low flow and redox cycles was also, to a certain extent, visible in time-integrated CI values at the upstream site. The use of time-integrated concentration index may be useful for medium- to long-term metal studies in the aquatic environment.     

Box Handling in the Loading and Unloading of Vans

The handling of 2,306 boxes being loaded or unloaded from vans onto or from 4-wheeled trolleys by 31 handlers in a warehouse were characterized. Handling was videotaped and characterized through an analysis grid completed by three trained observers. The following execution parameters were observed: nature of the exertion applied by the upper limbs, plane and direction of the exertion, resulting displacement of the box, grip, use of the lower limbs and the back. Results show that execution parameters used by handlers vary considerably from those usually recommended or studied. For example, symmetric grips were rarely used (4%). The grip was modified during the handling of half the boxes. Significant knee flexion was rarely observed (3% of exertions). Each box was moved by applying an average of . 3.5 different exertions. Exertions were mostly applied in a plane parallel to the shoulders; they were rarely executed in a strict sagittal plane (11%). The implication of these observations are discussed.     

Community Sustainability Plans to enable change towards sustainable practice – a Scottish case study

There is a need for a global shift towards a low-carbon society and this requires action at the local level. The aim of the study into sustainable community development is to clarify the role of a community as a whole rather than the role of individuals within that community. Mixed methods of literature review and empirical study have been used to translate the knowledge and experience with urban sustainable development into empirical knowledge of a rural, market town setting. The exemplary case study is the Scottish market town Huntly. The main findings of the study show the need for three ingredients for a Community Sustainability Plan for a town such as Huntly. Community involvement is crucial in developing such plans in a rural setting. Further research in more remote settings, e.g. coastal and island communities, is needed to allow broader conclusions on rural sustainable development.     

Thermal hydrolysis of secondary scum for control of biological foam.

Thermal hydrolysis of secondary scum at 9 bars and 170 degrees C was shown to completely destroy Gordonia sp. cells and reduce its foaming potential, so that it can be recycled to headworks or sent to the solids-handling side of the plant without the risk of causing foaming problems in the activated sludge system and anaerobic digesters. This process shows promise for biological foam control in wastewater treatment plants where solids retention time control and selective wasting cannot be applied and/or selector installation is not possible. An initial cost comparison of thermal hydrolysis and several widely accepted foam-management strategies shows it to be competitive; however, optimization of operating pressure and temperature is necessary.