Combinatory chemical and biological approaches to investigate metal elements in agricultural runoff water

As part of a project studying the interactions between farming practices, soil erosion processes, and fate of agricultural pollutants into runoff waters, we conducted a pilot study to investigate the relationship between metal contents and metallothionein-2A (MT-2A) as a bioindicator of metal exposure. Runoff water samples were collected between May and November 1999 at the point of outlet of an elementary watershed located in the Paris basin. Selected metals (Al, As, Cd, Cr, Cu, Pb, Hg, Ni, and Zn) were analyzed using conventional techniques. In parallel, human T cells were exposed to water samples for 6 and 18 h and then cell viability and MT-2A gene expression were measured. Results show that among the 10 water samples tested, Al and Zn predominate (highest values = 4.9 and 2.6 microM, respectively), while other metals were below the microM level. Five out of 10 samples induced MT-2A gene expression (30-80% increase at 18 h) as compared with the control. When comparing MT-2A induction profile with metals contents, no obvious correlation was found, suggesting that additional components or parameters are involved. Finally, there was an apparent inverse relationship between Ca concentration and MT-2A gene induction. Although still preliminary, in the absence of longer monitoring, this study shows that MT-2A gene expression is a useful tool to complement chemical analysis in assessing metal elements in water. These combinatory approaches will be pursued and integrated in an ongoing watershed field research project.     

Chemical and biological characterization of emissions from small residential stoves burning wood and charcoal

Emissions from a small residential wood stove and a newly developed residential stove burning charcoal have been characterized by chemical analysis and mutagenicity testing (Ames Salmonella test). For wood burning the samples were taken under normal and starved air conditions burning birch and spruce separately. The burning conditions in the stove seemed to influence the emissions to a larger extent than the type of wood.The emissions of aldehydes, benzene and polycyclic aromatic hydrocarbons from the charcoal-burning stove are lower by a factor of 25–1000 as compared to the wood stove. The mutagenicity of the emissions showed a similar trend.     

Developing environmental quality standards for various pesticides and priority pollutants for French freshwaters

The French Ministry of the Environment and Water Agencies have derived environmental quality standards following the existing French framework called SEQ-Eau, for 28 pesticides and seven priority substances listed in the Water Framework Directive. Like other existing frameworks, SEQ-Eau relies upon the use of standard toxicity test results and assessment factors. This approach made it possible to derive the desired quality standards, but due to the lack of chronic toxicity data many of the standards are only provisional. In addition, emerging issues such as endocrine disruption should be taken into account in this framework. Depending on the available data, more flexible derivation approaches, such as the statistical distribution of NOECs, are recommended for future versions of SEQ-Eau. A comparison is made using SEQ-Eau and the methodology currently being discussed in Europe to develop environmental quality standards, showing that the European approach is more conservative. Conversely, the proposed approach under the Water Framework Directive does not cover the entire range of required quality classes.     

Modelling of silica diffusion experiments with 32Si in Boom Clay

A mathematical model describing the dissolution of nuclear glass directly disposed in clay combines a first-order dissolution rate law with the diffusion of dissolved silica in clay. According to this model, the main parameters describing the long-term dissolution of the glass are etaR, the product of the diffusion accessible porosity eta and the retardation factor R, and the apparent diffusion coefficient D(app) of dissolved silica in clay. For determining the migration parameters needed for long-term predictions, four Through-Diffusion (T-D) experiments and one percolation test have been performed on undisturbed clay cores. In the Through-Diffusion experiments, the concentration decrease after injection of 32Si (radioactive labelled silica) was measured in the inlet compartment. At the end of the T-D experiments, the clay cores were cut in thin slices and the activity of labelled silica in each slice was determined. The measured activity profiles for these four clay cores are well reproducible. Since no labelled silica could be detected in the outlet compartments, the Through-Diffusion experiments are fitted by two In-Diffusion models: one model assuming linear and reversible sorption equilibrium and a second model taking into account sorption kinetics. Although the kinetic model provides better fits, due to the sufficiently long duration of the experiments, both models give approximately similar values for the fit parameters. The single percolation test leads to an apparent diffusion coefficient value about two to three times lower than those of the Through-Diffusion tests. Therefore, dissolved silica appears to be strongly retarded in Boom Clay. A retardation factor R between 100 and 300 was determined. The corresponding in situ distribution coefficient K(d) is in the range 25-75 cm(3) g(-1). The apparent diffusion coefficient of dissolved silica in Boom Clay is estimated between 2 x 10(-13) and 7 x 10(-13) m(2) s(-1). The pore diffusion coefficient is in the range from 6 x 10(-11) to 1 x 10(-10) m(2) s(-1).     

Solute transport modeling under cultivated sandy soils and transient water regime

Drainable lysimeters offer the possibility to integrate heterogeneous solute leaching conditions caused by row crops and transient water regime, and to conveniently measure water and solute fluxes at the drainage outlet. To compare solute leaching behavior in and around drainable lysimeters operating under a transient water regime in potato (Solanum tuberosum L.) fields, parameters of the convective lognormal transfer (CLT) function model were fitted using bromide (Br-) flux concentrations (Cf) measured in lysimeters and from Br- resident concentrations (Cr) measured in adjacent soil cores. Expected mean values Ez(I) obtained from Cr and Cf CLT parameters were equivalent and well correlated (R2 = 0.78). However, estimated median values mu of the CLT function were smaller when derived from Cr (1.05 to 1.28) compared with Cf (1.23 to 2.14). Most mu values were also smaller than previously reported values for a 30-cm reference depth, indicating that 50% of solute mass would leach more readily in these coarse sandy soils. Higher variance and dispersion of Cr compared with those of Cf could be related to a smaller sampling support (sample size/sampling area) in the case of Cr measured by soil coring, or to disruption of solute transport mechanisms in the repacked lysimeter. Retained Br- in the top soil layer after 12 to 17 cm of cumulative drainage was indicated by measured Cr. Neither CLT function simulated well residual topsoil Cr values, indicating that Br- plant cycling or preferential flow probably interfered even though tuber Br- uptake was relatively small.     

UN/ECE ICP Materials Dose-response Functions for the Multi-pollutant Situation

A “multi-pollutant exposure programme” reflecting the new pollution situation where SO₂ is no longer the dominating pollutant has been performed by the International Co-operative Programme on Effects on Materials, including Historic and Cultural Monuments (ICP Materials) within the activities of the Convention on Long-range Transboundary Air Pollution. The main results obtained in the period 1997–2003 are summarised. Dose-response functions are presented for carbon steel, zinc, copper, bronze and limestone. Parameters involved in the functions include besides SO₂ and pH, which were included in the previously developed functions from ICP Materials, also the effect of particulate matter and HNO₃.     

Characterising sources and sinks of rural VOC in eastern France

Fifty non-methane hydrocarbons (NMHC) and seventeen carbonyl compounds were measured at a French rural site from 1997 to 2001, as part of the EMEP programme. Data handling was based on an original source-receptor approach. First, the examination of the levels and trends was completed by the comparison of the seasonal distribution of rural and urban VOC/acetylene ambient ratios. This analysis has shown that most of the compounds derived from mixing and photochemical transformation of mid-range transported urban pollutants from the downwind urban area. Then, identified sources and sinks were temporally apportioned. Urban air masses mixing explains, at least, 80% of the wintertime levels of anthropogenic NMHC and isoprene. In summer, photochemistry dominates the day-to-day distribution of anthropogenic NMHC whilst summertime isoprene is also controlled by in-situ biogenic emissions. Then, the results of C(1)-C(3) carbonyls were discussed with respect to their direct biogenic and anthropogenic emissions and photochemical production through the [carbonyl/auto-exhaust tracers] emission ratio. Diluted vehicle exhaust emissions mainly contribute to the total content of lower aldehydes in winter while other processes control lower ketones. Secondary production is predominant in summer with at least a 50% high intensity. Its dependence upon temperature and radiation is also demonstrated. Finally, the importance of the primary and secondary biogenic production of acetone and formaldehyde is assessed. In particular, biogenic contribution would explain 37 +/- 25% of acetone levels in summer.     

Pigeon orientation: effects of the application of magnets under overcast skies

 To verify the existence of a magnetic compass in birds, researchers have often released homing pigeons under overcast skies that are equipped with bar magnets on various parts of their body. In particular, Keeton was successful in finding disorientation in overcast conditions in a first series of tests, but not in a second series. The experiments reported here attempt to explain this contradiction on the basis of findings obtained by releasing pigeons equipped in a way similar to that reported in Keeton's tests and pigeons equipped in a way similar to that reported by other authors. Received: 15 November 1999 / Accepted in revised form: 28 February 2000     

Evaluation of lipid peroxidation as a toxicity bioassay for plants exposed to copper

Agricultural soils may contain toxic levels of copper (Cu) due to sewage sludge spreading or industrial pollution but chemical analyses may not be representative of Cu bioavailability, defined as the soil Cu fraction that plants can actually absorb (i.e. Cu fraction which is not strongly adsorbed to soil components). Lipid peroxidation caused by Cu in plants was investigated as a relevant bioassay of toxicity. Seven-day-old rapeseed plantlets were grown on Cu-supplemented medium in controlled conditions. Lipid-peroxidation was assessed by measuring: (1) the 2-thiobarbituric acid (TBA)-reactive substances; (2) the hydroperoxy acids by HPLC analysis; and (3) the alkane outputs by gas chromatography. We first verified the correlation between the results obtained by each method and then discussed their advantages and disadvantages within the context of a bioassay, showing that the volatile alkane output measurement is the most precise and easy to perform method for this purpose.