英国国家生态系统评估及对我国的启示

英国于2009年至2011年初开展了第一次国家尺度的生态系统评估,对自然环境为社会和经济发展所提供的服务进行了评估,分析了近60年以来英国自然生态系统变化趋势及面临的问题,使公众了解和认识到了自然的真正价值。本文介绍了英国生态评估的框架体系和主要结论,并分析了对我国生态环境管理的启示,生态管理中应该客观评估自然生态系统对社会经济的作用和价值,将生态系统服务纳入到政府决策体系的构建中;生态评价应该选用适当的指标,评价最终的服务,可用具有可比性的多组数据进行分析,从而降低评估的不确定性;生态评价也需要关注生态系统的未来情景,做好持续长效评估的准备,建立专项评估制度;要注重公众参与,建立多利益攸关方的协商体系,促进公众和各方利益团体的积极参与。     

以预处理剩余污泥为燃料MFC产电性能及不连续供电的可行性

为探讨微生物燃料电池(microbial fuel cell,MFC)处理经预处理后剩余污泥的可行性以及不连续供电能力,采用双室MFC,以剩余污泥热处理上清液为基质进行启动和运行,通过改变电池阴极电子受体而导致电势差变化来监测其产电的运行稳定性.结果表明,反应器以氧气作为阴极电子受体148 h后启动成功,最大输出电压0.24 V,将阴极电子受体换为铁氰化钾时,能获得0.66 V的最大输出电压和4.21 W·m~(-3)的最大功率密度.当将阴极电子受体分别替换为氧气或者开路,又转换为铁氰化钾后,电池输出功率恢复迅速,电池对有机物去除效率基本不受影响,对化学需氧量(COD)、氨氮去除效率分别达70%和80%.本研究表明,利用预处理剩余污泥进行MFC处理和产电是可行的,可获得较高的功率密度,同时MFC可以实现不连续供电.     

湖北省某钢铁厂工业区及周边铅污染调查

为了解湖北省某钢铁厂周边铅污染的现状,通过对钢铁厂工业区及其周边乡村的土壤、蔬菜、居民体内和排污渠污泥中铅元素含量的研究,其结果表明:钢铁厂周围的土壤、蔬菜、居民均受到了一定程度的铅等重金属元素的污染,其含量高于国家标准或正常范围;钢铁厂工业区周边土壤铅污染主要由于工业废气(烟尘)扩散沉降和废水灌溉引起;污染区人体尿样中铅元素含量(116～160 ng/mL)普遍超标,头发样(2.09～12.04 μg/g)基本正常,尿样比头发样更能显示铅等重金属元素在人体内的分布特征.     

锌精炼铅塔燃烧系统烟气温度模糊控制研究

针对锌精馏铅塔动态过程中的非线性、非最小相位特征、不稳定性、时滞和负荷干扰,基于模糊控制策略下给出了锌精馏铅塔燃烧系统新的控制方法.运用模糊控制系统对锌精馏铅塔的烟气温度进行仿真研究和实时控制结果表明,该研究所设计的模糊控制器能够克服许多干扰因素,产生了良好的控制效果.     

改性粉煤灰在酸雾治理方面的研究

为去除化工生产等过程中产生的酸雾废气,首先用水作用法、微波法和传统湿法对粉煤灰进行改性试验,结果显示:传统湿法中的碱法效果最佳,改性后粉煤灰的BET比表面积是改性前的8.23倍.再用改性后的粉煤灰与廉价易得的天然矿物沸石和熟石灰作为活性组分,制得一种新型的复合吸附剂.常温常压下,动态吸附盐酸雾,实验结果表明:由改性粉煤灰制作的吸附剂G对盐酸雾的吸附性能比未经改性的吸附剂W有所提高,在文中所述条件下,饱和吸附量由改性前的331.4 mg/g提高到改性后的445.2 mg/g.     

土壤柴油污染修复的抽气提取去除实验研究

为得到土壤气相抽提(SVE)去除柴油的优化条件,进行了一维土柱抽气提取去除柴油污染物的实验研究,研究不同初始含水率、不同抽气量对污染土壤中柴油去除率的影响及不同深度残留柴油的变化规律。结果表明：在本实验模拟的范围内,抽气量越大,SVE处理效果越好;初始含水率越低,处理效果越好;此外,不同深度去除率变化的规律基本上是随深度的增大而减小。实验结果可为土壤轻油污染实际治理提供实验数据基础。     

Modeling VOC-odor exposure risk in livestock buildings

This paper describes a novel idea of linking models of exposure, internal dosimetry, and health effects. Risk assessment approach that integrates predicted odor caused by volatile organic compounds (VOC-odor) of toluene/xylene concentrations in human tissues leads to predict exposure risks in livestock buildings. First, VOC transport model was developed to calculate airborne toluene/xylene concentrations. Based on a physiologically based pharmacokinetic (PBPK) model, concentrations within five compartments representing lung, liver, fat, slowly perfused tissues, and rapidly perfused tissues could be quantified. By using a pharmacodynamic (PD) Hill model, we can optimally fit data from rat and human experiments to reconstruct dose-response relationships for accounting human health effects from nose poke and eye irritation. Results demonstrated that peak tissue concentration occurring at 5-10h in that fat contains the highest concentration than other tissues at around 4ppm of toluene and 1.8ppm of xylene. The EC(10) values are 114 and 232ppm, whereas expected risks are estimated to be 0.71% and 0.26% of human exposure to toluene and xylene, respectively. Risk analyses indicate that inhalation exposure in livestock buildings poses no significant threat to human health under the present environmental conditions. This method provides a rigorous and effective approach to relate target tissue concentration to human nose poke or eye irritation. We suggest that our probabilistic framework and methods be taken seriously because they produce general conclusions that are more robust and could offer a risk-management framework for discussion of future establishment of limits for respiratory exposure to VOC-odor.     

The study on the dechlorination of OCDD with Pd/C catalyst in ethanol-water solution under mild conditions

Dechlorination of octachlorodibenzo-p-dioxin (OCDD) was carried out in ethanol-water (v/v=1:1) solution of NaOH in the presence of Pd/C catalysts with the use of H(2). The substrate was dechlorinated with Pd/C under mild conditions (atmospheric pressure and <100 degrees C) to give a chlorine-free product, dibenzo-p-dioxin (DD), in high yields. After reaction of 3h at 50 degrees C, 95.9% OCDD was degraded to low dechlorinated congeners and the yield of DD was 77.4%. We have also studied the dechlorination selectivity of chlorine atoms on the different substituted positions and postulated the dechlorination pathway of OCDD. For OCDD, the 2-position has higher reactivity than 1-position, but the difference is very small. From the distribution statistics of the intermediates during the reaction, we postulate that the steric effect plays an important role during the reaction and affect the dechlorination pathway of OCDD.     

Decomposition pathways and reaction intermediate formation of the purified, hydrolyzed azo reactive dye C.I. Reactive Red 120 during ozonation

In this study, an aqueous solution of purified, hydrolyzed C.I. Reactive Red 120 (RR 120, Color Index), was selected as a model to investigate the degradation pathways and to obtain additional information on the reaction intermediate formation. The dye was purified to avoid the influence of the impurities on the ozonation process and on the formation of oxidation by-products. To simulate the dye-bath effluents from dyeing processes with azo reactive dyes, a hydrolyzed form of the dye was chosen as a representative compound. High performance liquid chromatography/mass spectrometry and its tandem mass spectrometry was chosen to identify the decomposition pathways and reaction intermediate formation during the ozonation process. In addition total organic carbon and high performance ion chromatography analysis were employed to obtain further information on the reaction processes during ozonation. Purified, hydrolyzed RR 120 was decomposed under the direct nucleophilic attack by ozone resulting in oxidation and cleavage of azo group and aromatic ring, while the triazine group still remained in the solution even after prolonged oxidation time (120 min) due to its high resistance to ozonation. Phenol, 1,2-dihydroxysulfobezene, 1-hydroxysulfonbezene were detected as the degradation intermediates, which were further oxidized by O(3) and *OH to other open-ring products and then eventually led to simple oxalic and formic acid identified by HPIC.     

Determination of Nitrobenzene in Wastewater Using a Hanging Mercury Drop Electrode

The determination of trace amount nitrobenzene in wastewater on a hanging mercury drop electrode was studied. The determination conditions of pH, supporting electrolyte, accumulation potential, accumulation time, and voltammetric response were optimized. The sharp peak of the nitrobenzene was appeared at 0.05 V. The peak electric current was proportional to the concentration of nitrobenzene in the range of 1.47 × 10⁻⁵ ∼ 1.0 × 10⁻³ mol/l with relative standard deviations of 3.99 ∼ 8.94%. The detection limit of the nitrobenzene in water was 5 × 10⁻⁶ mol/l. The proposed method offered low limit of determination, easy operation, the use of simple instrumentation, high sensitivity and good reproducibility. It was applied to the determination of nitrobenzene in wastewater with an average recovery of 94.0% ∼ 105%. The proposed method provided fast, sensitive and sometimes real time detection of nitrobenzene.