Three-dimensional biogenic C-doped Bi2MoO6/In2O3-ZnO Z-scheme heterojunctions derived from a layered precursor

Novel 3D biogenic C-doped Bi_2 MoO_6/In_2O_3-ZnO Z-scheme heterojunctions were synthesized for the first time, using cotton fiber as template. The as-prepared samples showed excellent adsorption and photodegradation performance toward the hazardous antibiotic doxycycline under simulated sunlight irradiation. The morphology, phase composition and in situ carbon doping could be precisely controlled by adjusting processing parameters. The carbon doping in Bi_2 MoO_6/In_2O_3-ZnO was derived from the cotton template, and the carbon content could be varied in the range 0.9–4.4 wt.% via controlling the heat treatment temperature. The sample with Bi_2 MoO_6/In_2O_3-ZnO molar ratio of 1:2 and carbon content of1.1 wt.% exhibited the highest photocatalytic activity toward doxycycline degradation,which was 3.6 and 4.3 times higher than those of pure Bi_2 MoO_6 and Zn In Al-CLDH(calcined layered double hydroxides), respectively. It is believed that the Z-scheme heterojunction with C-doping, the 3D hierarchically micro–meso–macro porous structure, as well as the high adsorption capacity, contributed significantly to the enhanced photocatalytic activity.     

Highly catalytic activity of Mn/SBA-15 catalysts for toluene combustion improved by adjusting the morphology of supports

Rod-like, hexagonal and fiber-like SBA-15 mesoporous silicas were synthesized to support MnO_x for toluene oxidation. This study showed that the morphology of the supports greatly influenced the catalytic activity in toluene oxidation. MnO_x supported on rod-like SBA-15(R-SBA-15) displayed the best catalytic activity and the conversion at 230°C reached more than 90%, which was higher than the other two catalysts. MnO_x species consisted of coexisting MnO_2 and Mn_2O_3 on the three kinds of SBA-15 samples. Large amounts of Mn_2O_3 species were formed on the surface and high oxygen mobility was obtained on MnO_x supported on R-SBA-15, according to the H_2 temperature programmed reduction(H_2-TPR)and X-ray photoelectron spectroscopy(XPS) results. The Mn/R-SBA-15 catalyst with greater amounts of Mn_2O_3 species possessed a large amount of surface lattice oxygen, which accelerated the catalytic reaction rate. Therefore, the surface lattice oxygen and high oxygen mobility were critical factors on the catalytic activity of the Mn/R-SBA-15 catalyst.     

Effect of preparation methods on the performance of CuFe-SSZ-13 catalysts for selective catalytic reduction of NOx with NH3

CuFe-SSZ-13 catalyst showed excellent performance in the selective catalytic reduction of NO_x with NH₃ (NH₃-SCR) for diesel engine exhaust purification. To investigate the effect of preparation methods on NH₃-SCR performance, Fe was loaded into one-pot synthesized Cu-SSZ-13 catalysts through solid-state ion-exchange (SSIE), homogeneous deposition precipitation (HDP) and liquid ion-exchange (IE), respectively. Three CuFe-SSZ-13 catalysts showed similar SO₂ resistance, which was better than that of Cu-SSZ-13. The improvement was attributed to the protection of Fe species. Hydrothermal stability of three CuFe-SSZ-13 catalysts was significantly different, which was attributed to the state of active species caused by different preparation methods. Compared with the other two catalysts, more active species existed inside the zeolite pores of CuFe-SSZ-13_SSIE. During hydrothermal aging, the aggregation of these active species in the pores caused the collapse of catalyst structure, ultimately leading to the deactivation of CuFe-SSZ-13_SSIE. In contrast, Fe species was dispersed better on the surface over CuFe-SSZ-13_IE, enhancing the hydrothermal stability of catalysts. Consequently, Fe loading effectively improved the resistance of SO₂ and H₂O over Cu-SSZ-13. For CuFe-SSZ-13, large amounts of active species located inside the zeolite pores are not beneficial for the hydrothermal stability.     

输油站工艺管网施工质量控制

输油站内工艺管线安装应与土建及其他专业的施工密切配合.管道施工应具备下列条件方可开工:设计及其他安装技术文件齐全,施工图已经会审;施工方案已经批准,技术交底和必要的技术培训已经完成;材料、施工机具基本到位,并能保持连续施工;施工现场应做到"三通一平",即水通、路通、电通、场地平整.严格控制工艺管网施工质量,是保证管网安全运行的基础.     

应用重组孕激素基因酵母测定饮用水中内分泌干扰物的方法

研究了用重组孕激素受体基因酵母测定饮用水中内分泌干扰物的方法,并利用该种方法检测了南方某水厂不同处理工艺过程水样对孕激素受体活性的抑制水平.结果表明,重组孕激素受体基因酵母能够与孕激素专一性的结合,诱导产生明显的剂量-效应关系,EC₅₀值为0.5 nmol/L,具有较高灵敏度;环境内分泌干扰物五氯酚和壬基酚具有孕激素受体抑制活性,其IC₅₀值分别为2.4μmol/L和3.7μmol/L;重组孕激素受体基因/报道基因的酵母技术是一种筛选和定量分析具有孕激素受体抑制活性的内分泌干扰物的快速、有效方法.结合固相萃取的前处理技术,重组孕激素受体基因酵母对水厂不同处理工艺水样检测出明显的孕激素受体抑制活性,抑制率均大于58%,表明重组孕激素受体基因酵母检测技术能够快速监测和鉴别水样中具有抑制孕激素受体活性的物质.     

泥石流-堰塞湖灾后应急救援决策研究——以甘肃文县“8·17”泥石流灾害为例

以甘肃文县2020年"8.17"泥石流灾害为例,开展泥石流-堰塞湖灾害灾后应急救援决策研究,探索性将该类灾害前期阶段应急救援决策总结为:灾情盲估预判-先期应急备灾-成因剖析-灾情宏观初判-应急救援决策等。研究结果表明:预判影响人口约10.8万人,预估需求帐篷约2.3万顶、饮用水约240 t/d,文县消防救援大队距离最近,附近有文县第一人民医院等8家医疗防疫力量,石鸡坝初级中学等10所学校可作为临时安置避难场所备选;受影响矿山企业5家,重要水库1座;泥石流淤积物堆积区约7.91×10~4 m~2,堰塞湖面积约1.06 km~2,淹没区约37.4×10~4 m~2,因灾受损民居51处、桥梁3处、电站1处、加油站1处及耕地10处,优选3条灾后救援生命线。     

增强服务意识,创新管理模式,提升PPE信息化管理水平——PPE信息管理系统介绍

本文概括介绍了PPE信息管理系统。该系统是根据国标委和国家安监总局的信息化建设总要求,结合全国个体防护装备(PPE)标委会实际研发的,包括PPE标准化工作管理、标准全程控制、PPE辅助决策3个子系统。该系统打造了PPE标委会的信息化管理平台,满足了标准化工作对信息化管理的需要,提高了信息化管理水平。利用这个平台,标委会能够实现技术培训、信息发布、标准查询、辅助决策等功能,从而全面提升本领域标准化管理水平,促进本行业发展。     

SO2对Ag/Al2O3催化剂上CH3OH还原NO性能的影响

用溶胶-凝胶混合法制备了Ag负载量为5%的Ag/A1₂O₃催化剂.研究了富氧条件下,SO₂对CH₃OH在催化剂上还原NO性能的影响.结果表明,反应气不含SO₂和H₂O时,NO还原活性温度较低,有显著量N₂O生成,这被归因为反应过程中,部分氧化态Ag被还原为金属Ag.添加SO₂或同时添加SO₂和H_{2相似文献}   

HDTMA改性蒙脱土的稳定性

利用十六烷基三甲基溴化铵(HDTMA)改性天然蒙脱土,观察其在不同环境条件下的稳定性.试验结果表明:随着阳离子交换量(CEC)的增加改性蒙脱土在蒸馏水中的稳定性逐渐降低,1.0CEC改性蒙脱土中HDTMA发生解吸.改性蒙脱土在水体中的稳定性随着振荡强度的加强而降低.从室温到70℃对改性蒙脱土的稳定性几乎无影响.超声波处理使改性蒙脱土的稳定性有所降低.NaCl能提高水体中改性蒙脱土的稳定性,而CaCl₂却使其稳定性有所下降.同酸性条件相比,在碱性条件下改性蒙脱土的稳定性更好.因此,废水的温度、pH和无机盐对低改性蒙脱土稳定性的影响都比较小,这为改性蒙脱土处理废水和它的再生提供了可能.同时在较低振荡强度下,改性蒙脱土也许还能成为废水生物处理的载体.     

微囊藻毒素-LR对鸡肝脏的氧化损伤影响

蓝藻虽然能产生有毒的生物毒素,但是也含有较高的蛋白质。为探索蓝藻饲料化利用的可能性,本文通过腹腔注射的方式研究了微囊藻毒素-LR(MC-LR)对崇仁麻鸡的半数致死剂量(LD_(50))及其对肝脏的氧化损伤。实验设计了4个剂量组(对照组、5、10和20μg·kg~(-1)MC-LR),并在1、3、12、24和48 h检测了谷胱甘肽(GSH)含量以及谷胱甘肽S-转移酶(GST)、谷胱甘肽过氧化物酶(GPX)、超氧化物歧化酶(SOD)和过氧化氢酶(CAT)活性变化。结果表明,MC-LR对崇仁麻鸡的LD_(50)值为34.67μg·kg~(-1)体重(bw),95%的置信限为33.51～35.83μg·kg~(-1)bw。在MC-LR的作用下,鸡肝出现了氧化应激现象。3个染毒组鸡肝中GSH含量呈现先下降而后上升恢复至正常水平的趋势,GST酶活力表现为先上升而后下降至正常值的趋势,这说明GSH和GST共同参与了鸡肝中MC-LR的解毒;鸡肝中GPX酶活性在前3小时先保持不变(除了1 h的高剂量组),随即显著上升,这说明GPX和GSH共同参与了鸡肝中过量活性氧自由基(ROS)的清除,GPX可以作为监测MC-LR引起鸡毒性作用的生物标志物。CAT酶活力表现为先显著下降(P<0.05)而后快速上升至正常值的趋势,SOD酶在整个实验期间几乎保持稳定,这可能与SOD酶活性较高所致。