烧结机头除尘灰生产复合肥的研究

通过系统分析烧结机头除尘灰的成分和化学结构,研究制定了利用烧结除尘灰生产复合肥的配方和工艺,该研究为烧结除尘灰的利用开发了新的用途。     

Phthalate and PAH concentrations in dust collected from Danish homes and daycare centers

As part of the Danish Indoor Environment and Children’s Health (IECH) study, dust samples were collected from 500 bedrooms and 151 daycare centers of children (ages 3 to 5) living on the island of Fyn. The present paper reports results from the analyses of these samples for five phthalate esters (diethyl phthalate (DEP), di(n-butyl) phthalate (DnBP), di(isobutyl) phthalate (DiBP), butyl benzyl phthalate (BBzP), di(2-ethylhexyl) phthalate (DEHP)) and three PAHs (pyrene, benz[a]anthracene (B[a]A) and benzo[a]pyrene (B[a]P)). The three PAHs and DEHP were detected in dust samples from all sites, while DEP, DnBP, DiBP and BBzP were detected in more than 75% of the bedrooms and more than 90% of the daycare centers. The dust mass-fractions of both phthalates and PAHs were log-normally distributed. With the exception of DEP, the mass-fractions of phthalates in dust were higher in daycare centers than homes; PAH mass-fractions in dust were similar in the two locations. There was no correlation among the different phthalates in either homes or daycare centers. In contrast, the PAH were correlated with one another – more strongly so in homes (R² = 0.80–0.90) than in daycare centers (R² = 0.28–0.45). The dust levels of several phthalates (BBzP, DnBP and DEHP) were substantially lower than those measured in a comparable study conducted 6–7 years earlier in Sweden. Although usage patterns in Denmark differ from those in Sweden, the current results may also reflect a change in the plasticizers that are used in common products including toys. PAH levels were roughly an order of magnitude lower than those measured in Berlin and Cape Cod residences, suggesting that the Danish sites are less impacted by motor vehicle emissions.     

Life cycle assessment of selective non-catalytic reduction (SNCR) of nitrous oxides in a full-scale municipal solid waste incinerator

Selective non-catalytic reduction (SNCR) of nitrous oxides in a full-scale municipal solid waste incinerator was investigated using LCA. The relationship between NO_x-cleaning and ammonia dosage was measured at the plant. Un-reacted ammonia - the ammonia slip - leaving the flue-gas cleaning system adsorbed to fly-ash or in the effluent of the acidic scrubber was quantified from the stoichiometric reaction of NO_x and ammonia assuming no other reaction products was formed. Of the ammonia slip, 37% was associated with the fly-ash and 63% was in the effluent of the acidic scrubber. Based on NO_x-cleaning efficiency, the fate of the ammonia slip as well as the environmental impact from ammonia production, the potential acidification and nutrient enrichment from NO_x-cleaning was calculated as a function of ammonia dosage. Since the exact fate of the ammonia slip could not be measured directly, a number of scenarios were set up ranging from “best case” with no ammonia from the slip ending up in the environment to “worst case” where all the ammonia slip eventually ended up in the environment and contributed to environmental pollution. In the “best case” scenario the highest ammonia dosage was most beneficial demonstrating that the environmental load associated with ammonia production is of minor importance. In contrast, in a “worst case” scenario” NO_x-cleaning using SNCR is not recommendable at all, since the impacts from the ammonia slip exceed the saved impacts from the NO_x removal. Increased dosage of ammonia for removal of NO_x is recommendable as long as less than 10-20% of the ammonia slip to the effluent of the acidic scrubber ends up in the environment and less than 40% of the slip to the fly-ash ends up in the environment. The study suggests that the actual fate of the ammonia slip is crucial, but since the release of the ammonia may take place during transport and at the facilities that treat the wastewater and treat the fly-ash this factor depends strongly on local conditions and may be hard to determine. Thus, LCA-modeling proved useful in assessing the balance between ammonia dosage and NO_x-removal in flue-gas cleaning from waste incineration.     

考虑应变速率影响的混凝土重力坝非线性地震响应分析

通过引入应变速率、损伤变量以及刚度退化指标等参数,建立了应变率相关的混凝土弹塑性损伤模型。运用该模型对某重力坝厂房坝段分别就率相关及率无关两种情况进行了三维非线性地震响应时程分析。深入研究了混凝土应变速率等相关特性对结构动力响应的影响。结果表明,应变速率对混凝土的力学性能有一定的影响,随着应变速率的增加,坝体结构的变形减小,主拉应力有所提高,应变能有所减小以及开裂损伤有一定的降低。所得结论对混凝土重力坝的震害研究有一定的参考价值。     

Risk on the ramble: The international transfer of risk and vulnerability

In this paper the purpose is to discuss a concept of technology that can explain how the transfer of technology implies the risk of new failures, misuse, accidents and unhealthy workplaces. Production technologies are often transformed through a steady stream of incremental changes appropriate to their social context, and the technology will therefore gradually acquire some contextually dependent preconditions for use. These preconditions will most probably be revealed when a technology is transferred from one context to another. Thus, a technology transfer project may trigger a long process of re-innovations just to make the technology fully operational in its new context. In a transfer process, technological risks may arise due to incomplete transfer of mastering capacity; mismatch between transferred technology and the environment; transfer of latent conditions for failure; and the transformation of latent conditions or known risks when the technology is installed in a new environment. Longitudinal data from the Norwegian petroleum industry indicates that the first phases in a transfer process will create high technological risks. It will take many years before the transferred technologies are adapted to the new context and the risk level has been normalised.     

Atmospheric composition change research: Time to go post-normal?

For more than two decades a number of frameworks for scientific knowledge production are being proposed by science and technology researchers. They all advocate an extended involvement of non-specialists, in particular when it comes to knowledge production applicable to practical societal problems. We look to what extent these new frameworks have taken ground within a particular research community: the ACCENT Network of Excellence which coordinates European atmospheric chemistry and physics research applicable to air pollution and climate change. We did so by stimulating a debate through a “blog”, a survey and in-depth interviews with ACCENT scientists about the interaction between science, policy making and civil society, to which a great deal of ACCENT member contributed in writing or verbally. Most of them had interactions with policy makers and/or the general public, and they generally believe that interactions with spheres other than the scientific are needed. While such interactions give personal insight and satisfaction, they seem to have little impact on the goals and the practice of the scientific work itself. Extended frameworks of science production that go beyond the disciplinary mode seem to emerge at the level of individual scientists, yet they still need to find their way to the level of scientific project management. In this paper we discuss the justifications and barriers to implement a higher degree of extended knowledge integration in applied science projects such as ACCENT. It is felt that the community of atmospheric chemists and physicists is mature for such an implementation and recommendations are given to help and make this happen.     

Morphologie effects of channelization: the case of the Neebing-McIntyre floodway,Thunder Bay,Ontario, Canada

The Neebing-McIntyre floodway in Thunder Bay, Ontario, Canada, has been constructed with a relatively straight and uniform trapezoidal channel, compared with the prechannelized sinuous reaches of the Neebing and the McIntyre rivers. The flow regime of the floodway also contrasts significantly with the prechannelized regime, because of the combination of discharges from these rivers into a new channel and the regulation of flows by a diversion structure. The maximum channel capacity of the floodway is about 284 m³ s^–1 (175-year regional flood), compared with about 40 m³ s^–1 and 60 m³ s^–1, respectively, for the Neebing and the McIntyre. According to regime theories, the construction of a straight and trapezoidal channel has upset the equilibrium of the stream system and therefore should lead to some accelerated erosion and sedimentation processes in the new channel immediately after construction. Erosion potential is particularly high during higher discharge events, when flow velocities are expected to be greater than the prechannelized velocities of the Neebing and the McIntyre. The overall sediment yield of the watershed is low (71t km^–2 yr^–1), compared with other documented watersheds of North America, but the rates of deposition in the floodway are relatively high, mainly due to the backwater effect of Lake Superior. Unless maintained by constant channel work, the floodway will tend to fill up with sediment, until a postconstructional equilibrium is reestablished.     

Emissions from heated indoor dust

Settled indoor dust was collected from a university building, and the fine fraction was heated in the temperature range of 50-250 degrees C. Emissions of compounds were analysed and identified in a system consisting of a thermal desorption unit coupled to a gas chromatograph-mass spectrometer (GC-MS). The heating took place in both an oxidative (air) and an inert (He) atmosphere. The results indicate that oxidation of adsorbed compounds occurred, as well as decomposition of the dust itself. The emission in air started somewhere between 150 and 200 degrees C, with aldehydes and ketones as the main compounds. When heated in the inert atmosphere, semivolatile organic compounds (SVOCs) were emitted at temperatures above 150 degrees C. These compounds were not found in the air system, probably due to oxidation. Based on the obtained results we recommend that the temperature of hot surfaces in indoor environments should be kept below 150 degrees C to avoid oxidation of indoor dust and minimise the emissions.     

A Baumol–Oates approach to solid waste taxation

A national Baumol–Oates tax on waste in Denmark helped achieve a reduction of 26% in net solid waste from 1987 to 1998. The tax, which is levied per ton of waste, was particularly effective as regards the heavier waste streams such as construction waste and garden waste. When it comes to industrial and commercial waste, there are indications that the waste tax is not sufficiently significant to induce changes in behavior, and that except for very waste-intensive enterprises, companies do not seem to be very price sensitive. For household waste, the impact of the tax can be improved where tariffs for garbage collection are weight based, rather than per unit. However, the waste sector is an area in which the price signals are modified and filtered by institutionalized practices in municipal administration, and in which true-cost pricing is not easy to achieve. Hence, the rational choice assumption of environmental economics needs to be supplemented by an institutional dimension to interpret responses to environmental taxes correctly. Received: July 13, 2001 / Accepted: October 2, 2001