重庆近11年大气混合层厚度研究

根据新闻颁国家标准ＧＢ／Ｔ１３２０１－９１的规定，计算了重庆地区近１１年大气混合厚度，分析结果表明，重庆地区大气混合层厚度有明显日变化和季节变化，大气稳定度是混合层厚度的主要决定因子。     

新型高效台车式退火炉研制

退火炉采取小燃烧室,对工件实行侧下加热、强化绝热措施复合炉衬、二次均热风管、扩张室沉降等五项措施.目的是为了提高炉的热效率和炉温的均匀度.在耗煤量较低的情况下能保持较高的燃烧室强度.有利于强化燃烧和减少蓄散热损失.实行扩张室沉降,在不加任何除尘装置的条件下烟尘排放浓度达到了国家标准新规定的排放要求,而且大大改善了工人的劳动条件.     

生活垃圾填埋场建设项目环保验收调查方法研究简

垃圾填埋场建设项目的主要环境问题包括：渗沥液排放、地下水环境污染、大气环境污染、噪声污染、景观变化和环境安全。根据工作经验,建立了包括建设项目基本情况、生态环境影响、社会环境影响、生态环境保护措施四大类调查监测指标为核心的环保验收调查指标体系,提出了文件资料核实、现场勘查、遥感调查、公众意见调查、环境监测和摄影法为主的建设项目竣工环保验收调查技术方法。     

Effects of salinity and organic matter on the partitioning of perfluoroalkyl acid (PFAs) to clay particles

The influence of salinity and organic matter on the distribution coefficient (K(d)) for perfluorooctane sulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) in a brackish water-clay system was studied. The distribution coefficients (K(d)) for PFAs onto inorganic clay surfaces increased with salinity, providing evidence for electrostatic interaction for the sorption of PFAs, whereas the relationship between K(d) and organic carbon content (f(oc)) suggested that hydrophobic interaction is the primary driving force for the sorption of PFAs onto organic matter. The organic carbon normalized adsorption coefficient (K(oc)) of PFAs can be slightly overestimated due to the electrostatic interaction within uncoated inorganic surfaces. In addition, the dissolved organic matter released from coated clay particles seemed to solvate PFA molecules in solution, which contributed to a decrease in K(d). A positive relationship between K(d) and salinity was apparent, but an empirical relationship for the 'salting-out' effect was not evident. The K(d) values of PFAs are relatively small compared with those reported for persistent organic pollutants. Thus, sorption may not be a significant route of mass transfer of PFAs from water columns in estuarine environments. However, enhancement of sorption of PFAs to particulate matter at high salinity values could evoke potential risks to benthic organisms in estuarine areas.     

偏二甲肼污染及治理方法评价

阐述了偏二甲肼 (Unsymmetricaldimethyl-hydrazine ,简称UDMH)对人体致毒机理 ,对环境的污染特征 ,着重对偏二甲肼污染治理中的臭氧氧化法、自然降解法、离子树脂交换法、活性炭吸附法等技术进行了综合评价 ,并提出了TiO2 光催化氧化法及光和细菌降解偏二甲肼的研究方向。     

环境经济优化设计案例

本文列举三例，论述完善价格机制发展城市燃气供应事业、运用排污权交易思想削减二氧化硫污染和利用市场干预促进固体废弃物回收，分别设计出优化方案，并概算出预期环境经济效益。     

Adsorption of multi-heavy metals Zn and Cu onto surficial sediments: modeling and adsorption capacity analysis

Improved multiple regression adsorption models (IMRAMs) was developed to estimate the adsorption capacity of the components [Fe oxides (Fe), Mn oxides (Mn), organic materials (OMs), residuals] in surficial sediments for multi-heavy metal Zn and Cu. IMRAM is an improved version over MRAM, which introduces a computer program in the model developing process. As MRAM, Zn(Cu) IMRAM, and Cu(Zn) IMRAM again confirmed that there is significant interaction effects that control the adsorption of compounded Zn and Cu, which was neglected by additional adsorption model. The verification experiment shows that the relative deviation of the IMRAMs is less than 13 %. It is revealed by the IMRAMs that Mn, which has the greatest adsorption capability for compounded Zn and Cu (54.889 and 161.180 mg/l, respectively), follows by interference adsorption capacity of Fe/Mn (?1.072 and ?24.591 mg/l respectively). Zn and Cu influence each other through different mechanisms. When Zn is the adsorbate, compounded Cu mainly affects the adsorption capacities of Fe/Mn and Fe/Mn/OMs; while when Cu is the adsorbate, compounded Zn mainly exerts its effect on Mn, Fe/Mn, and Mn/OMs. It also shows that the compounded Zn or Cu weakened the interference adsorption of Fe/Mn, and meanwhile, strengthened the interference adsorption of Mn/OMs.     

Aquatic biomonitoring of Giardia cysts and Cryptosporidium oocysts in peninsular Malaysia

An aquatic biomonitoring of Giardia cysts and Cryptosporidium oocysts in river water corresponding to five villages situated in three states in peninsular Malaysia was determined. There were 51.3 % (20/39) and 23.1 % (9/39) samples positive for Giardia and Cryptosporidium (oo)cysts, respectively. Overall mean concentration between villages for Giardia cysts ranged from 0.10 to 25.80 cysts/l whilst Cryptosporidium oocysts ranged from 0.10 to 0.90 oocysts/l. Detailed results of the river samples from five villages indicated that Kuala Pangsun 100 % (9/9), Kemensah 77.8 % (7/9), Pos Piah 33.3 % (3/9) and Paya Lebar 33.3 % (1/3) were contaminated with Giardia cysts whilst Cryptosporidium (oo)cysts were only detected in Kemensah (100 %; 9/9) and Kuala Pangsun (66.6 %; 6/9). However, the water samples from Bentong were all negative for these waterborne parasites. Samples were collected from lower point, midpoint and upper point. Midpoint refers to the section of the river where the studied communities are highly populated. Meanwhile, the position of the lower point is at least 2 km southward of the midpoint and upper point is at least 2 km northward of the midpoint. The highest mean concentration for (oo)cysts was found at the lower points [3.15?±?6.09 (oo)cysts/l], followed by midpoints [0.66?±?1.10 (oo)cysts/l] and upper points [0.66?±?0.92 (oo)cysts/l]. The mean concentration of Giardia cysts was highest at Kuala Pangsun (i.e. 5.97?±?7.0 cysts/l), followed by Kemensah (0.83?±?0.81 cysts/l), Pos Piah (0.20?±?0.35 cysts/l) and Paya Lebar (0.10?±?0.19 cysts/l). On the other hand, the mean concentration of Cryptosporidium oocysts was higher at Kemensah (0.31?±?0.19 cysts/l) compared to Kuala Pangsun (0.03?±?0.03cysts/l). All the physical and chemical parameters did not show significant correlation with both protozoa. In future, viability status and molecular characterisation of Giardia and Cryptosporidium should be applied to identify species and genotypes/subgenotypes for better understanding of the epidemiology of these waterborne parasites.     

Contamination of Oxygen-Consuming Organics in the Yellow River of China

Contamination of oxygen-consuming organics (OCOs) was one of the most serious problems in the Yellow River of China. This study was conducted to analyze monitoring of the data on OCOs contamination for the river in 1980 and during 1992–1999 as well as examining the effect of suspended solids (SS) on chemical oxygen demand (COD_Mn) and biochemical oxygen demand (BOD₅) of river water. Several significant results have arisen from the study. First, COD_Mn and BOD₅ of the river water showed an increasing trend from the upper to the lower reaches of the mainstream. BOD₅ values of river water in 1992 were significantly higher than those in 1980 and showed an increasing trend during 1992–1999. Second, OCOs in river water of the mainstream was attributed mainly to point sources; the ratio of point to non-point sources of BOD₅ was about 2.81. The load from point sources showed an increasing trend during 1992–1998. In contrast, the load from non-point sources manifested a decreasing trend during this period; this was caused by the decreasing trend of SS content in river water. The total load of BOD₅ from point and non-point sources displayed an increasing trend during 1992–1998. Third, as the humic substances in SS can hardly be biologically oxidized in natural conditions but can be oxidized by chemical oxidants such as potassium permanganate, COD_Mn was not suitable for being regarded as a parameter reflecting the pollution degree of OCOs in river water with a high SS content.     

Classification and comparison of municipal solid waste based on thermochemical characteristics

Municipal solid waste (MSW) has been normally sorted into six categories, namely, food residue, wood waste, paper, textiles, plastics, and rubber. In each category, materials could be classified further into subgroups. Based on proximate and ultimate analysis and heating value, statistical methods such as analysis of variance (ANOVA) and cluster analysis were applied to analyze the characteristics of MSW in every subgroup and to try to distinguish their relative properties. The chemical characteristics analysis of MSW showed that polyethylene (PE), polypropylene (PP), and polystyrene (PS) had the highest volatile matter content, with almost no ash and fixed carbon, while polyethylene terephthalate (PET) had high carbon content but low hydrogen content. Bones and vegetables had the highest ash content, while nutshells and rubber had the highest fixed carbon content. Paper and starch food had the highest oxygen content, and wool and bones had the highest nitrogen and sulfur content. Polyvinyl chloride (PVC) had the highest chlorine content at about 55%. PE, PP, and PS had the highest heating value, followed by chemical products such as rubber and chemical fiber. Conversely, paper, vegetables and bones had the lowest heating value. The results of cluster analysis of MSW components showed that fruit peel, weeds, wood, bamboo, leaves and nutshells could be classified as the lignocellulose category; starch food, cotton, toilet paper, printing paper and cardboard could be classified as the glucose monomer category; wood and chemical fiber could be classified as the high nitrogen and sulfur category; and PE, PP, and PS could be cluster as the polyolefin category.

Implications: The yield of municipal solid waste (MSW) is constantly increasing and waste to energy (WTE) has been used extensively all over the world. During the processes of incineration, pyrolysis, or gasification, the impact of physical and chemical properties of MSW is of great significance. However, the traditional classification of MSW is too general to provide more detailed information in many investigations. It is necessary to perform the investigation of characteristics of combustible MSW to distinguish different categories of MSW and find out their subclassification.