水生植物对不同富营养化程度水体净化能力研究

为不同富营养化程度水体筛选出净化能力强的植物种类,文章采用模拟人工湿地系统处理人工配制污水的方法,以7d为一个采样周期,比较了5种植物(满江红、槐叶萍、四叶萍、黑藻和慈姑)在轻度、中度和重度富营养水体中TN、TP、NH4+-N去除能力.实验结果表明:5种植物处理能力随着富营养程度提高而增大.在重度富营养条件下,处理能力...     

建设项目施工期环境监理实施要点

建设项目施工期环境监理实施要点是国家建设项目环境管理的重要组成部分,通过分析建设项目施工期环境监理要点的内容,提出环境监理实施要点的作用和实施环境监理实施要点的要求.     

基于PSR-AHP的衡水市生态环境质量评价及预测

从衡水市生态环境质量现状出发,以压力-状态-响应模型(PSR)为框架确定该市生态环境质量评价指标体系,采用层次分析法(AHP)确定各指标的综合权重,构建了衡水市生态环境质量评价体系,对其近9年的生态环境质量进行综合评价,并对未来10年生态环境质量作出预测,预测结果显示2002 ～ 2020年的衡水市生态环境质量总体呈上升趋势.     

“十二五”地表水国家环境监测网络吉林省水环境国控监测点位布设的构想

根据国家环境质量监测网络,对“十二五”地表水环境质量监测断面调整工作要求,吉林省在辖区内所有水环境质量监测断面及采样点基础上,完成了松花江流域和辽河流域国控监测断面的优化调整工作。在此过程中,如何从国家尺度上,既能充分反映吉林省水环境质量状况,又能满足国家对地表水环境管理需求进行了深入思考。本文以吉林省为例,在确定国控监测断面及采样点的布设中．提出了自己的构想和建议。     

快速高效去除微囊藻的GO/QPEI复合纳米材料

本研究合成了一种新型高效的去除铜绿微囊藻(Microcystis aeruginosa)的氧化石墨烯/季铵盐聚乙烯亚胺(GO/QPEI)纳米复合材料.GO/QPEI在pH为4~10的条件下都具有高效去除M.aeruginosa的能力,其去除能力在2 min内可达96%以上.GO/QPEI对微囊藻的吸附更符合Freundlich方程,最大吸附量为5.58×1011cells·mg-1.吸附动力学表明GO/QPEI的假二级吸附反应.GO纳米片和QPEI的协同效应是其高效去除微囊藻的主要机制.     

Effects of metal and acidic sites on the reaction by-products of butyl acetate oxidation over palladium-based catalysts

Catalytic oxidation is widely used in pollution control technology to remove volatile organic compounds. In this study, Pd/ZSM-5 catalysts with different Pd contents and acidic sites were prepared via the impregnation method. All the catalysts were characterized by means of N2 adsorption- desorption, X-ray fluorescence （XRF）, HE temperature programmed reduction （H2-TPR）, and NH3 temperature programmed desorption （NH3-TPD）. Their catalytic performance was investigated in the oxidation of butyl acetate experiments. The by-products of the reaction were collected in thermal desorption tubes and identified by gas chromatography/mass spectrometry. It was found that the increase of Pd content slightly changed the catalytic activity of butyl acetate oxidation according to the yield of CO2 achieved at 90%, but decreased the cracking by-products, whereas the enhancement of strong acidity over Pd-based catalysts enriched the by-product species. The butyl acetate oxidation process involves a series of reaction steps including protolysis, dehydrogenation, dehydration, cracking, and isomerization. Generally, butyl acetate was cracked to acetic acid and 2- methylpropene and the latter was an intermediate of the other by-products, and the oxidation routes of typical by-products were proposed. Trace amounts of 3-methylpentane, hexane, 2-methylpentane, pentane, and 2-methylbutane originated from iso4merization and protolysis reactions.     

Reduction and characterization of bioaerosols in a wastewater treatment station via ventilation

Bioaerosols from wastewater treatment processes are a significant subgroup of atmospheric aerosols. In the present study,airborne microorganisms generated from a wastewater treatment station(WWTS) that uses an oxidation ditch process were diminished by ventilation.Conventional sampling and detection methods combined with cloning/sequencing techniques were applied to determine the groups,concentrations,size distributions,and species diversity of airborne microorganisms before and after ventilation. There were 3021 ± 537 CFU/m3 of airborne bacteria and 926 ± 132 CFU/m3 of airborne fungi present in the WWTS bioaerosol.Results showed that the ventilation reduced airborne microorganisms significantly compared to the air in the WWTS. Over 60% of airborne bacteria and airborne fungi could be reduced after4 hr of air exchange. The highest removal(92.1% for airborne bacteria and 89.1% for fungi) was achieved for 0.65–1.1 μm sized particles. The bioaerosol particles over 4.7 μm were also reduced effectively. Large particles tended to be lost by gravitational settling and small particles were generally carried away,which led to the relatively easy reduction of bioaerosol particles0.65–1.1 μm and over 4.7 μm in size. An obvious variation occurred in the structure of the bacterial communities when ventilation was applied to control the airborne microorganisms in enclosed spaces.     

Effect of a high strength chemical industry wastewater on microbial community dynamics and mesophilic methane generation

A high strength chemical industry wastewater was assessed for its impact on anaerobic microbial com- munity dynamics and consequently mesophilic methane generation. Cumulative methane production was 251 mL/g total chemical oxygen demand removed at standard temperature and pressure at the end of 30 days experimental period with a highest recorded methane percentage of 80.6% of total biogas volume. Volatile fatty acids （VFAs） analysis revealed that acetic acid was the major intermediate VFAs produced with propionic acid accumulating over the experimental period. Quantitative analysis of microbial communities in the test and control groups with quantitative real time polymerase chain reaction highlighted that in the test group, Eubacteria （96.3%） was dominant in comparison with methanogens （3.7%）. The latter were dominated by Methanomicrobiales and Methanobacteriales while in test groups increased over the experimental period, reaching a maximum on day 30. Denaturing gradient gel electrophoresis profile was performed, targeting the 16S rRNA gene of Eubacteria and Archaea, with the DNA samples extracted at 3 different time points from the test groups. A phylogenetic tree was constructed for the sequences using the neighborhood joining method. The analysis revealed that the presence of organisms resembling Syntrophomonadaceae could have contributed to increased production of acetic and propionic acid intermediates while decrease of organisms resembling Pelotomaculum sp. could have most likely contributed to accumulation of propionic acid. This study suggested that the degradation of organic components within the high strength industrial wastewater is closely linked with the activity of certain niche microbial communities within eubacteria and methanogens.     

Characterization of extracellular polymeric substances in the biofilms of typical bacteria by the sulfur K-edge XANES spectroscopy

A combined approach of physicochemical extraction and sulfur K-edge X-ray absorption near-edge structure（XANES） spectroscopy was applied to characterize the extracellular polymeric substances（EPS） of typical bacterial biofilms in this study. Physicochemical analysis showed variation of the contents of DNA,polysaccharide and protein in different fractions of EPS in different mediums. The sulfur K-edge XANES analysis yielded a variety of spectra.Spectral fitting of the XANES spectra utilizing a large set of model compounds showed that there was more reduced sulfur in both LB-EPS（loosely bound EPS） and TB-EPS（tightly bound EPS） of all the biofilms in LB medium than in R2 A medium. More oxidized sulfur was identified in LB-EPS than that in TB-EPS,suggesting different niches and physiological heterogeneity in the biofilms. Our results suggested that the sulfur K-edge XANES can be a useful tool to analyze the sulfur speciation in EPS of biofilms.     

核壳结构TiO_2/SiO_2/Fe_3O_4颗粒的制备及性能研究

针对纳米Ti O2光催化剂回收困难、成本较高等问题,采用溶胶-凝胶法在表面包覆了Si O2的磁基体Fe3O4上负载Ti O2,制备出一种具有光催化作用的核壳结构Ti O2/Si O2/Fe3O4功能纳米颗粒。通过TEM、XRD等对其包覆效果及结构进行表征,结果表明,Si O2、Ti O2包覆的醇∶酯∶水的比例分别为4.6∶12.3∶1和30.3∶12.5∶1时可以得到包覆均匀的Ti O2/Si O2/Fe3O4功能颗粒。在可见光和紫外光的照射下,Ti O2/Si O2/Fe3O4光催化剂降解亚甲基蓝溶液的脱色率分别为85.16%和78.86%,使用5次后颗粒的回收率仍能保持在75%以上,具有优异的光催化降解性能,并且可重复利用率高。