Acetylcholinesterase-polyaniline biosensor investigation of organophosphate pesticides in selected organic solvents

The behavior of an amperometric organic-phase biosensor consisting of a gold electrode modified first with a mercaptobenzothiazole self-assembled monolayer, followed by electropolymerization of polyaniline in which acetylcholinesterase as enzyme was immobilized, has been developed and evaluated for organophosphorous pesticide detection. The voltammetric results have shown that the formal potential shifts anodically as the Au/MBT/PANI/AChE/PVAc thick-film biosensor responded to acetylthiocholine substrate addition under anaerobic conditions in selected organic solvent media containing 2% v/v 0.05 M phosphate buffer, 0.1 M KCl (pH 7.2) solution. Detection limits in the order of 0.147 ppb for diazinon and 0.172 ppb for fenthion in acetone-saline phosphate buffer solution, and 0.180 ppb for diazinon and 0.194 ppb for fenthion in ethanol-saline phosphate buffer solution has been achieved.     

Use of n-fold cross-validation to evaluate three methods to calculate heavy truck annual average daily traffic and vehicle miles traveled

Reliable estimates of heavy-truck volumes in the United States are important in a number of transportation applications including pavement design and management, traffic safety, and traffic operations. Additionally, because heavy vehicles emit pollutants at much higher rates than passenger vehicles, reliable volume estimates are critical to computing accurate inventories of on-road emissions. Accurate baseline inventories are also necessary to forecast future scenarios. The research presented in this paper evaluated three different methods commonly used by transportation agencies to estimate annual average daily traffic (AADT), which is used to determine vehicle miles traveled (VMT). Traffic data from continuous count stations provided by the Iowa Department of Transportation were used to estimate AADT for single-unit and multiunit trucks for rural freeways and rural primary highways using the three methods. The first method developed general expansion factors, which apply to all vehicles. AADT, representing all vehicles, was estimated for short-term counts and was multiplied by statewide average truck volumes for the corresponding roadway type to obtain AADT for each truck category. The second method also developed general expansion factors and AADT estimates. Truck AADT for the second method was calculated by multiplying the general AADT by truck volumes from the short-term counts. The third method developed expansion factors specific to each truck group. AADT estimates for each truck group were estimated from short-term counts using corresponding expansion factors. Accuracy of the three methods was determined by comparing actual AADT from count station data to estimates from the three methods. Accuracy of the three methods was compared using n-fold cross-validation. Mean squared error of prediction was used to estimate the difference between estimated and actual AADT. Prediction error was lowest for the method that developed separate expansion factors for trucks. Implications for emissions estimation using the different methods are also discussed.     

Source apportionment of fine particles in Tennessee using a source-oriented model

Source apportionment of fine particles (PM2.5, particulate matter < 2 microm in aerodynamic diameter) is important to identify the source categories that are responsible for the concentrations observed at a particular receptor. Although receptor models have been used to do source apportionment, they do not fully take into account the chemical reactions (including photochemical reactions) involved in the formation of secondary fine particles. Secondary fine particles are formed from photochemical and other reactions involving precursor gases, such as sulfur dioxide, oxides of nitrogen, ammonia, and volatile organic compounds. This paper presents the results of modeling work aimed at developing a source apportionment of primary and secondary PM2.5. On-road mobile source and point source inventories for the state of Tennessee were estimated and compiled. The national emissions inventory for the year 1999 was used for the other states. U.S. Environmental Protection Agency Models3/Community Multi-Scale Air Quality modeling system was used for the photochemical/secondary particulate matter modeling. The modeling domain consisted of a nested 36-12-4-km domain. The 4-km domain covered the entire state of Tennessee. The episode chosen for the modeling runs was August 29 to September 9, 1999. This paper presents the approach used and the results from the modeling and attempts to quantify the contribution of major source categories, such as the on-road mobile sources (including the fugitive dust component) and coal-fired power plants, to observed PM2.5 concentrations in Tennessee. The results of this work will be helpful in policy issues targeted at designing control strategies to meet the PM2.5 National Ambient Air Quality Standards in Tennessee.     

两种生物配体模型(BLM)预测Zn对大型蚤急性毒性的比较

通过天津地区一系列景观水体和配制的模拟溶液,评价应用于大型蚤(Daphnia magna)毒性预测的两种急性Zn-生物配体(BLM)模型(模型A和模型B)的预测能力.采用Visual MINTEQ 2.5.2进行BLM的相关计算和金属形态分析.对一定水化学参数的测定表明,根据Zn对大型蚤的急性毒性数据建立的模型B能够在Zn的生态风险评价中考虑其生物有效性,预测结果准确;以鱼类为对象开发并下调LA50后应用于水蚤毒性预测的模型A的预测值普遍高于实测值.可见,通过调整LA50拓展模型适用性的方法过于简单,还有待进一步研究.     

Numerical simulation of hydrogen–air detonation for damage assessment in realistic accident scenarios

An accidental hydrogen release within an equipment enclosure may result in the presence of detonable mixture in a confined environment. From a safety standpoint, it is then useful to assess the potential for damage. In that context, numerical simulation of the sequence of events subsequent to detonative ignition provides a useful tool, although with obvious limitations. This article describes the procedure, summarizes two case studies, and reviews the limitations. First, a hydrogen dispersion pattern is obtained from numerical simulation of dispersion, using a commercial package designed primarily for incompressible flow. This dispersion cloud is then used as the initial condition in an inviscid, compressible, reactive flow simulation. To force detonative ignition, a sufficiently large amount of energy is deposited in a small region that corresponds to the ignition location. Chemistry is modeled using a single step Arrhenius model. Because the wave thickness is small compared with the computational domain, a fine mesh is needed, limiting the practicality of the process to two-dimensional geometries. This is the most significant limitation; it is conservative. The two cases described in the paper include an electrolyzer, in which a small release occurs, leading potentially to some damage to the enclosure, and a reformer, in which the consequences are potentially more serious.     

城市生态安全多层次灰色综合评价

从城市生态安全的基本内涵出发,根据压力(pressure)-状态(state)-响应(response)模型,从生态系统压力、生态系统状况、生态系统响应3方面构建一个4层次的城市生态安全评价指标体系,运用灰色系统理论,构建了城市生态安全多层次灰色综合评价模型,并结合实例进行计算。评价结果与实际情况基本相符,表明该模型能有效地利用评价指标的信息,所给出的综合评价值既能用于描述所评价城市的生态安全状况,亦可对不同城市的生态安全状况进行比较,对更加科学合理地评价城市生态安全状况具有参考价值。     

Meta‐analytic tests of relationships between organizational justice and citizenship behavior: testing agent‐system and shared‐variance models

Research on the unique effects of different types of perceived fairness on citizenship behavior that benefits individuals (organizational citizenship behavior (OCB‐I) and organizations (OCB‐O) has produced mixed results. We assert that how OCB‐O and OCB‐I are conceptualized affects the patterns of results, and we hypothesize that, when OCB is conceptualized appropriately, an agent‐system model is supported (interactional and procedural justice are the strongest unique predictors of OCB‐I and OCB‐O, respectively). We also hypothesize that shared variance among the justice types explains additional variance in OCB. Analyses of semi‐ partial correlations conducted on meta‐analytic coefficients supported our hypotheses. Theoretical and practical implications are discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

聚偏氟乙烯中空纤维疏水膜及其初步应用

使用聚偏氟乙烯中空纤维疏水膜,比较了三种膜蒸馏过程用于质量分数为3．5％的氯化钠溶液的脱盐效果。实验结果表明：真空膜蒸馏的通量最大,达到21．8kg／（m^2&#183;h）,其次为直接接触式膜蒸馏,气扫式膜蒸馏的通量最小;三种膜蒸馏过程的脱盐率均在99．99％以上;膜蒸馏通量随膜内径增加略有增加,与膜壁厚呈反比。真空膜蒸馏法可用于反渗透浓水的进一步处理,当反渗透浓水浓缩4倍时,原水电导率从5980μS／cm增加到22800μS／cm,膜蒸馏产水电导率保持在1．8～1．9μS／cm以内,脱盐率大于99．99％。