Biohydrogen production using waste activated sludge as a substrate from fructose-processing wastewater treatment

Biohydrogen production by dark fermentation in a series of batch tests under different environmental control conditions was evaluated to determine the optimal initial cultivation pH and temperature for a continuous-flow kinetic test to validate the kinetic model system. The waste activated sludge (WAS) from fructose-processing manufacturing was used as the model substrate for biohydrogen production. The batch experiments for biohydrogen production were conducted in a 6 l bioreactor. Fifteen batch kinetic tests were investigated when pH was controlled at 6, 7, 8 and 9 as well as the temperature was controlled at 37 °C, 45 °C and 55 °C, respectively. The experimental results indicated that the optimal operational condition for hydrogen production occurred while pH was 7 and temperature was 55 °C with the highest hydrogen production of 7.8 mmol. The optimal recovery time for hydrogen was 25 h in the batch experiments. Furthermore, the kinetic test of biohydrogen production was performed by anaerobic mixed microbial culture in the continuous-flow experiment when pH and temperature was maintained at 7 and 55 °C. Approximately 60% and 7% of substrate solution was converted into acetate and hydrogen, respectively, at the steady state. Roughly only 0.77% and 2.7% of substrate solution was converted into propionate and butyrate, respectively, at a steady-state condition. The experimental and modeling approaches presented in this study could be employed for the design of pilot-scale and full-scale anaerobic biohydrogen fermentors using food-processing waste activated sludge (WAS) as a substrate solution.     

基于满意度的热风炉变论域模糊控制

针对热风炉具有参数时变、强干扰、非线性等特点,其最佳空燃比难以确定的问题,提出一种基于模糊满意度的变论域模糊控制方法。首先通过在线获得加热过程的状态参数,采用满意度函数对空燃比进行评价,并将该评价结果和炉温变化作为变论域模糊控制方法的输入来实时获取最优的空燃比值,从而保证热风炉炉温的温度控制。实际运行结果证实了该系统的有效性。     

可燃气体燃爆特性综合试验装置构建与甲烷试验

为研究半开敞空间内可燃气体爆炸过程,设计带有泄压面的气体爆炸室,并在此基础上构建一套可燃气体燃爆特性综合试验装置。运用该试验装置,研究预混塔内甲烷气体分层现象以及甲烷爆炸浓度与最小点火能之间的变化规律。甲烷分层试验结果表明:静置一段时间后,预混塔中甲烷浓度随高度的增加而增大。最小点火能试验结果显示,当甲烷的试验爆炸体积分数在10%～13%时,其浓度与点火能之间呈现比较平缓的变化关系,而当其体积分数小于10%或大于13%时,浓度稍微变化,其点火能将发生明显变化。     

基于数值模拟的城市中心区风环境研究

利用CFD软件对长沙市中心区典型区域的风环境进行了三维数值模拟研究。结果表明,城市建筑群布局不当会造成多方面不利影响:如建筑群内局部地区气流不畅,污染物难以扩散,影响市民身体健康;街道峡谷风使得行人行动不便,冬季热舒适感差;复杂的风环境可能造成建筑构件的损坏乃至脱落,对地面行人的安全造成威胁;建筑围护结构渗透风增加造成建筑能耗的增加。在城市规划和建设中,中心区风环境状况要引起足够的重视,在建设之前要进行风环境模拟与评估。     

跨座式单轨交通人身安全雷电防护分析

针对跨座式单轨交通列车遭受雷击时列车内的人员安全性,本文通过对列车内人员不接触与列车金属外壳直接连接的金属构件和接触与列车金属外壳直接连接的金属构件两种情况进行计算分析,得出第一种情况下,人员是完全安全的;第二种情况下,人员可能会有像蜜蜂刺痛或烟头灼痛的感觉,但不威胁生命安全。     

纳米氧化镍颗粒对长牡蛎(Crassostreagigas)抗氧化防御体系的影响

纳米氧化镍(nNiO)作为一种广泛使用的纳米颗粒,其水生毒理效应研究还很有限。为探索n Ni O对海洋贝类的毒性机制,本研究将长牡蛎(Crassostrea gigas)置于不同浓度(0、1、10、100 mg·L~(-1))的n Ni O中暴露96 h,分别测定鳃和消化腺组织的丙二醛(MDA)含量和超氧化物歧化酶(SOD)、过氧化物酶(POD)以及过氧化氢酶(CAT)活性,并通过实时荧光定量PCR技术测定了鳃和消化腺中应激蛋白HSP70和AOX基因的表达变化。结果显示:在100 mg·L~(-1)n Ni O处理下,2种组织中MDA含量均显著性升高(P0.01),显示纳米颗粒造成了长牡蛎的脂质过氧化,并可能引起相应的氧化损伤。同时,n Ni O暴露也诱导了长牡蛎抗氧化酶(SOD、CAT和POD)活性的改变。其中,SOD和CAT活性在10 mg·L~(-1)浓度处理组达到最高,而POD活性在1 mg·L~(-1)浓度组即达最高值。在高浓度n Ni O(100 mg·L~(-1))胁迫下,3种抗氧化酶的活性均比低浓度(1和10 mg·L~(-1))处理组降低,表明抗氧化酶的保护作用在较低浓度暴露下更有效;而热激蛋白(hsp70)和交替氧化酶(aox)基因却分别在长牡蛎消化腺和鳃组织中上调表达(P0.01),并表现出一定的组织差异。说明高浓度纳米颗粒暴露中主要是应激蛋白发挥了作用。本文结果为纳米氧化镍对海洋双壳贝类的毒性机制研究及生态风险评估提供了基础数据。     

基于高通量分析方法的长江干流重庆段抗生素种类特征及来源初探

采用高通量分析方法对长江干流重庆段11个流域断面、2个市政污水处理厂进水和6个养殖场废水的潜在抗生素进行筛查,并结合抗生素使用调查探讨其来源。结果表明,(1)共检出83种抗生素,其中流域内检出36种,污水处理厂和养殖场废水中检出70种;磺胺间甲氧嘧啶检出率最高,在流域水体和废水的检出率分别为91%和55%,喹诺酮类是检出抗生素的主要类型;(2)长江干流重庆段下游检出抗生素数量高于上游检出抗生素;(3)有20种抗生素可能由上游携带和重庆市内排放2种方式进入流域,7种抗生素可能由上游携带入境,9种抗生素可能由重庆市内排放引入长江。     

Source attribution for mercury deposition with an updated atmospheric mercury emission inventory in the Pearl River Delta Region,China

Estimated anthropogenic Hg emission was 11.9 tons in Pearl River Delta for 2014. Quantifying contributions of emission sources helps to provide control strategies. More attentions should be paid to Hg deposition around the large point sources. Power plant, industrial source and waste incinerator were priorities for control. A coordinated regional Hg emission control was important for controlling pollution. We used CMAQ-Hg to simulate mercury pollution and identify main sources in the Pearl River Delta (PRD) with updated local emission inventory and latest regional and global emissions. The total anthropogenic mercury emissions in the PRD for 2014 were 11,939.6 kg. Power plants and industrial boilers were dominant sectors, responsible for 29.4 and 22.7%. We first compared model predictions and observations and the results showed a good performance. Then five scenarios with power plants (PP), municipal solid waste incineration (MSWI), industrial point sources (IP), natural sources (NAT), and boundary conditions (BCs) zeroed out separately were simulated and compared with the base case. BCs was responsible for over 30% of annual average mercury concentration and total deposition while NAT contributed around 15%. Among the anthropogenic sources, IP (22.9%) was dominant with a contribution over 20.0% and PP (18.9%) and MSWI (11.2%) ranked second and third. Results also showed that power plants were the most important emission sources in the central PRD, where the ultra-low emission for thermal power units need to be strengthened. In the northern and western PRD, cement and metal productions were priorities for mercury control. The fast growth of municipal solid waste incineration were also a key factor in the core areas. In addition, a coordinated regional mercury emission control was important for effectively controlling pollution. In the future, mercury emissions will decrease as control measures are strengthened, more attention should be paid to mercury deposition around the large point sources as high levels of pollution are observed.     

Using hyper-spectral indices to detect soil phosphorus concentration for various land use patterns

This study provides earthworm population data obtained from localities with a substantial anthropogenic impact spoils. The spoil heaps were reclaimed at the end of an opencast brown coal mining period. We studied spoils reclaimed by the two most commonly used reclamation processes: forestry and agricultural. The results show the significance of the locality age and the utilized reclamation process and treatment and their effect on earthworm communities. Our data indicate that apart from soil physical and chemical properties, the reclamation process itself may also induce viability and distribution of earthworm communities. Under standardized soil properties, the changes in earthworm populations during the succession were larger within the agricultural reclamation process as opposed to the forestry reclamation process for earthworm ecological groups and individual species.     

Environmental decentralization,environmental public service,and public health: evidence from 289 cities in China

Environmental Geochemistry and Health - Effective supply of environmental public services (EPS) is important to guarantee the mitigation of residential pollution exposure risk. This study analyzes...