活性炭-纳滤膜工艺去除饮用水中总有机碳和Ames致突变物

分别以地表水和地下水为水源的水厂出水为研究对象 ,探讨活性炭 纳滤膜工艺对饮用水中总有机碳和Ames致突变物的去除效果及机理 .结果表明 ,活性炭的吸附作用受其本身性质和有机物特性影响较大 ,去除能力有限 ,但它可作为纳滤的预处理 ,确保膜进水符合要求 ;纳滤则可将水中总有机碳和Ames致突变物大部分去除 ,使TA₉₈及TA₁₀₀菌株在各试验剂量下的MR值均小于 2 ,Ames试验结果均完全呈阴性 ,确保了饮用水的安全性 .两者的组合是获得优质饮用水的有效处理工艺 .     

胡敏酸对铜的鱼鳃生物有效性影响的计算机模拟

以彩虹方头鱼为模拟对象,用鱼鳃微环境测定装置和化学平衡计算方法(MINTEQA2),计算了含和不含胡敏酸的人工河水及暴露于其中的鱼鳃微环境中,不同pH条件下,铜的形态分布.研究了胡敏酸对鱼鳃内外的铜的形态分布及其生物有效性的影响,并讨论了pH对此的影响.计算结果表明,当胡敏酸存在时,胡敏酸络合态铜成为鱼鳃内外铜形态分布体系中的优势态,并引起铜生物有效性的降低.鱼鳃粘液和胡敏酸的共同作用使鱼鳃微环境中的生物有效铜含量低于外部水相.pH对铜形态分布及生物有效性的影响主要发生在碱性环境下.     

Overestimate of remediation efficiency due to residual sodium persulfate in PAHs contaminated soil and a solution

Oxidation remediation is a commonly used technology for PAHs contaminated soil presently,but the overestimate of efficiency due to ongoing remediation by residual oxidants during extraction and testing has not been paid enough attention.In this study,persulfate was activated by Fe（Ⅱ） to inve stigate the effects of residual oxidants on PAHs removal during detection process and the elimination effects of adding Na₂ SO₃ and extending sampling time on residual oxidants.Results ...     

Carbonaceous species in fine particles at the background sites in Korea between 1994 and 1999

Organic carbon (OC) and elemental carbon (EC) in fine particles (PM_2.5) at two background sites, Kosan and Kangwha in Korea were measured during intensive field studies between 1994 and 1999. Fine particles were collected on pre-fired quartz filters in a low-volume sampler and analyzed using the selective thermal oxidation method with MnO₂ catalyst. The OC and EC concentrations at Kosan located at western tip of Cheju Island in southern Korea are lower than those at Kangwha located at western coastal area in mid-Korean peninsula. Still, the OC concentrations at Kosan are generally higher than those at other background areas in Japan and USA. The EC concentrations at Kosan are lower than or comparable to those at other background areas. The total carbon (TC, sum of OC and EC) to EC ratio values at both sites were higher than those at other background areas in Japan and USA. At Kosan, the OC and EC concentrations when air parcels were from southern China were higher than those when air parcels were coming from northern China. However, at Kangwha, the differences were statistically not clear since most air parcels were from northern China. Except when air parcels were from the North Pacific during summer, the OC and EC concentrations are well correlated indicating that both OC and EC share the same emission/transport characteristics. From the gaseous hydrocarbon data and the OC and EC relationship, it was found that during summer local biogenic emissions of OC might be significant at Kosan.     

聚合硫酸铁制备方法研究及其发展

聚合硫酸铁是一种优质高效无机高分子絮凝剂,在水处理领域中有良好的应用前景.本文探讨和综述了聚合硫酸铁制备方法的研究现状和发展趋势,并比较了各种方法的优缺点.内容包括:直接氧化法、催化氧化法、一步法、两步法、微生物氧化法以及其它一些新颖的制备方法.     

二噁监测方法的新进展

本文从样品采集及前处理 ,测定方法等方面对近几年二口恶口英的研究进展作一综述。     

Preparation of polymeric biosurfactant containing sugar and fatty acid esters

Vinyl sugar ester, 6-O-vinyladipoyl-d-glucose (VAG), was polymerized with vinyl fatty acid esters in dimethylformamide (DMF) with azobisisobutyronitrile (AIBN) to produce new amphiphilic polymers having branches of sugar and fatty acid esters. The influence of structural variations by changing the length of the alkyl chain of fatty acid moiety was examined by measurements of the surface tension and biodegradability.     

Environmental behaviour of a construction made of a mixture of hydraulic binders and air pollution control residues from municipal solid waste incineration Part 1. Physico-chemical characterisation and modelling of the source term

The reuse of waste materials requires the development of assessment methods for the long-term release of pollutants (source term) from wastes (or materials containing wastes) in contact with water. These methods depend on the scenario conditions: characteristics of the materials (especially physical structure and composition), contact with water. The scenario studied here is a water storage reservoir for fire fighting. The reservoir construction is made of a mixture of hydraulic binders and air pollution control (APC) residues from a municipal solid waste incinerator (MSWI). The modelling of the source term is performed in 5 steps ranging from the physico-chemical characterisation of the material to the validation of the proposed model by means of field simulation devices. This article presents the first steps of the methodology: physico-chemical characterisation of the source term, identification of the main transfer mechanisms and laboratory scale modelling of the source term. During the physico-chemical characterisation, it has been shown that the solidified waste shows a high basic capacity and that a relative decrease in pH during leaching favours retention of the main pollutants. During the first leaching sequences, the dynamic leaching tests show that the release of pollutants such as cadmium, arsenic, zinc and lead is extremely low but that the release of alkaline species (sodium and potassium) and chloride is very high from the beginning, whereas the release of calcium remains very high even after 3600 h of leaching. Identification of the main transfer mechanisms concludes that the release of soluble pollutants is the combined result of diffusional transfer of pollutants in the solution and the physico-chemical specificity of the species. The modelling based on these features enables a good simulation of the release but reveals a deviation from the experimental results after 500 h for alkaline species and 1000 h for Ca and Cl leaching. However, this deviation only appears after release of the major part of these elements.     

Effect of electrokinetic transport on the vulnerability of PAH-degrading bacteria in a model aquifer

There has been increasing interest in employing electro-bioremediation, a hybrid technology of bioremediation and electrokinetics, to overcome the low bioavailability of hydrophobic organic contaminants (HOC) by homogenizing sorption-retarded HOC and immobilised microorganisms. Present electro-remediation approaches mainly aim at macroscale pollutant extraction and tend to neglect possible impacts of direct current (DC) on the physiology of microorganisms. The effect of weak electric fields (X = 1 V cm⁻¹) on the fitness of electrokinetically dispersed fluorene-degrading Sphingomonas sp. LB126 in bench-scale model aquifers was investigated by flow cytometry using propidium iodide (PI) as an indicator that distinguishes between PI-permeable (cells with porous membranes, i.e. dead or vulnerable) and PI-impermeable bacteria. After 15.5 h of DC treatment 56% of all cells recovered were dispersed at the centimetre scale relative to 29% in the absence of DC. There was no overall negative effect of the 15.5-h DC treatment on cell vulnerability, as 7.0% of the DC-treated bacteria exhibited PI-staining compared to 6.5% of the control population. Minor differences were observed in the subpopulation that had been mobilised by electroosmosis with an approximately twofold increase in the percentage of PI-stained cells relative to the control. Enhanced PI staining did not correlate with reduced culturability of the cells on rich-medium agar plates. Relative to the control, DC-treated cells mobilised by electroosmosis were threefold more culturable, confirming earlier data that that PI-cell membrane permeability does not always indicate reduced viability of oligotrophic environmental bacteria. Our findings suggest that electrokinetics is a valuable mechanism to transport viable and culturable polycyclic aromatic hydrocarbon (PAH)-degrading bacteria in soil or sediments.     

An engineering model for countercurrent flow under wind-induced waves and current

A general model for the phase-averaged velocity field in wind-induced countercurrent flow is proposed. The influence of waves on the time-averaged velocity is accounted for by introducing a skewness factor in a parabolic eddy viscosity model. The skewness factor represents the net effect of the wavy surface in the engineering model for velocity. The coherent velocity components are described separately by an orbital velocity obtained from linear wave theory and are added to the time-averaged components to give a complete model for the phase-averaged velocity field. The proposed model collapses to the standard model for deep-water conditions, but is also shown to yield the correct behavior for intermediate conditions. Moreover, the bed shear stress, derived from the proposed velocity model, is also shown to be in agreement with experiments.