Pyrolysis of WEEE plastics using catalysts produced from fly ash of coal gasification

Catalytic pyrolysis of thermoplastics extracted from waste electrical and electronic equipment (WEEE) was investigated using various fly ash-derived catalysts. The catalysts were prepared from fly ash by a simple method that basically includes a mechanical treatment followed by an acid or a basic activation. The synthesized catalysts were characterized using various analytical techniques. The results showed that not treated fly ash (FA) is characterized by good crystallinity, which in turn is lowered by mechanical and chemical treatment (fly ash after mechanical and acid activation, FAMA) and suppressed almost entirely down to let fly ash become completely amorphous (fly ash after mechanical and basic activation FAMB). Simultaneously, the surface area resulted increased. Subsequently, FA, FAMB and FAMA were used in the pyrolysis of a WEEE plastic sample at 400°C and their performance were compared with thermal pyrolysis at the same temperature. The catalysts principally improve the light oil yield: from 59 wt.% with thermal pyrolysis to 83 wt.% using FAMB. The formation of styrene in the oil is also increased: from 243 mg/g with thermal pyrolysis to 453 mg/g using FAMB. As a result, FAMB proved to be the best catalyst, thus producing also the lowest and the highest amount of char and gas, respectively.

Open image in new window

     

Sensitivity of hypogean and epigean freshwater copepods to agricultural pollutants

Widespread pollution from agriculture is one of the major causes of the poor freshwater quality currently observed across Europe. Several studies have addressed the direct impact of agricultural pollutants on freshwater biota by means of laboratory bioassays; however, as far as copepod crustaceans are concerned, the ecotoxicological research is scarce for freshwater species and almost nonexistent for the hypogean ones. In this study, we conducted a comparative analysis of the available literature data on the sensitivity of freshwater copepods to agricultural pollutants. We also assessed the acute and chronic sensitivity of a hypogean and an epigean species, both belonging to the Crustacea Copepoda Cyclopoida Cyclopidae, to two N-fertilizers (urea and ammonium nitrate) and two herbicides (ARIANE^TM II from Dow AgroSciences LLC, and Imazamox), widely used for cereal agriculture in Europe. According to the literature review, freshwater copepods are sensitive to a range of pesticides and N-fertilizers. Ecotoxicological studies on hypogean species of copepods account only one study. There are no standardized protocols available for acute and chronic toxicity tests for freshwater copepods, making comparisons about sensitivity difficult. From our experiments, ionized ammonia proved to be more toxic than the herbicide Imazamox, in both short and chronic bioassays. Urea was the less toxic chemical for both species. The hypogean species was more sensitive than the epigean one to all chemicals. For both species and for all tested chemicals, acute lethality and chronic lethality were induced at concentrations higher than the law limits of good water body quality in Europe, except for ionized ammonia, which provoked the chronic lethality of the hypogean species at a lower concentration. The hazardous concentration (HC) of un-ionized ammonia for 5 % of freshwater copepods, obtained by a species sensitivity distribution, was 92 μg l^?1, significantly lower than the HC computed for traditional test species from freshwater environments.     

Bioaccumulation and biotransformation of arsenic compounds in Hediste diversicolor (Muller 1776) after exposure to spiked sediments

This study focused on the exposure of the common ragworm Hediste diversicolor (Müller 1776) to sediments enriched with different arsenic compounds, namely arsenate, dimethyl-arsinate, and arsenobetaine. Speciation analysis was carried out on both the spiked sediments and the exposed polychaetes in order to investigate H. diversicolor capability of arsenic bioaccumulation and biotransformation. Two levels of contamination (acute and moderate dose) were chosen for enriched sediments to investigate possible differences in the arsenic bioaccumulation patterns. The highest value of arsenic in tissues was reached after 15 days of exposure to dimethyl-arsinate (acute dose) spiked sediment (1,172?±?176 μg/g). A significant increase was also obtained in worms exposed both to arsenate and arsenobetaine. Speciation analysis showed that trimethyl-arsine oxide was the predominant chemical form in tissues of H. diversicolor exposed to all the spiked sediments, confirming the importance of this intermediate in biological transformation of arsenic.     

A multidisciplinary weight of evidence approach for classifying polluted sediments: Integrating sediment chemistry, bioavailability, biomarkers responses and bioassays

Evaluation of chemical bioavailability and onset of biological alterations is fundamental to assess the hazard of environmental pollutants, particularly when associated to sediments which need to be removed. In the present work, five sediment samples were collected from the Venice Lagoon and data from sediment chemistry were integrated with those of bioaccumulation of chemicals in European eel (Anguilla anguilla) exposed under laboratory conditions, responses of a wide battery of biomarkers, and standardized ecotoxicological bioassays. The overall results were elaborated within a recently developed, software-assisted weight of evidence (WOE) model which provides synthetic indices for each of considered line of evidence (LOE), before a general evaluation of sediment hazard. Levels of chemicals in sediments were not particularly elevated when compared to sediment quality guidelines of Venice Protocol. On the other hand, bioavailability was evident in some samples for Cd, Cu, Zn and, especially, polycyclic aromatic hydrocarbons. The ecotoxicological approach provided further evidence on the biological and potentially harmful effects due to released contaminants, and oxidative-mediated responses appeared of primary importance in modulating sublethal responses and the onset of cellular alterations. Biomarkers variations were sensitive, and more evident variations included significant changes of cytochrome P450 biotransformation pathway, antioxidant responses, onset of oxidative damages, lysosomal membrane stability and genotoxic effects. The results obtained from the battery of bioassays indicated that responses measured at organism level were in general accordance but less marked compared to the onset of sublethal changes measured through biomarkers. Overall this study revealed differences when comparing evaluations obtained from different LOEs, confirming the importance of considering synergistic effects between chemicals in complex mixtures. Compared to a qualitative pass-fail approach toward normative values, the proposed WOE model allowed a quantitative characterization of sediment hazard and a better discrimination of on the basis of various types of chemical and biological data.     

Assessing sediment hazard through a weight of evidence approach with bioindicator organisms: a practical model to elaborate data from sediment chemistry, bioavailability, biomarkers and ecotoxicological bioassays

Quality assessments are crucial to all activities related to removal and management of sediments. Following a multidisciplinary, weight of evidence approach, a new model is presented here for comprehensive assessment of hazards associated to polluted sediments. The lines of evidence considered were sediment chemistry, assessment of bioavailability, sub-lethal effects on biomarkers, and ecotoxicological bioassays. A conceptual and software-assisted model was developed with logical flow-charts elaborating results from each line of evidence on the basis of several chemical and biological parameters, normative guidelines or scientific evidence; the data are thus summarized into four specific synthetic indices, before their integration into an overall sediment hazard evaluation. This model was validated using European eels (Anguilla anguilla) as the bioindicator species, exposed under laboratory conditions to sediments from an industrial site, and caged under field conditions in two harbour areas. The concentrations of aliphatic hydrocarbons, polycyclic aromatic hydrocarbons and trace metals were much higher in the industrial compared to harbour sediments, and accordingly the bioaccumulation in liver and gills of exposed eels showed marked differences between conditions seen. Among biomarkers, significant variations were observed for cytochrome P450-related responses, oxidative stress biomarkers, lysosomal stability and genotoxic effects; the overall elaboration of these data, as those of standard ecotoxicological bioassays with bacteria, algae and copepods, confirmed a higher level of biological hazard for industrial sediments. Based on comparisons with expert judgment, the model presented efficiently discriminates between the various conditions, both as individual modules and as an integrated final evaluation, and it appears to be a powerful tool to support more complex processes of environmental risk assessment.     

Climate change impacts on critical international transportation assets of Caribbean Small Island Developing States (SIDS): the case of Jamaica and Saint Lucia

This contribution presents an assessment of the potential vulnerabilities to climate variability and change (CV & C) of the critical transportation infrastructure of Caribbean Small Island Developing States (SIDS). It focuses on potential operational disruptions and coastal inundation forced by CV & C on four coastal international airports and four seaports in Jamaica and Saint Lucia which are critical facilitators of international connectivity and socioeconomic development. Impact assessments have been carried out under climatic conditions forced by a 1.5 °C specific warming level (SWL) above pre-industrial levels, as well as for different emission scenarios and time periods in the twenty-first century. Disruptions and increasing costs due to, e.g., more frequent exceedance of high temperature thresholds that could impede transport operations are predicted, even under the 1.5 °C SWL, advocated by the Alliance of Small Island States (AOSIS) and reflected as an aspirational goal in the Paris Climate Agreement. Dynamic modeling of the coastal inundation under different return periods of projected extreme sea levels (ESLs) indicates that the examined airports and seaports will face increasing coastal inundation during the century. Inundation is projected for the airport runways of some of the examined international airports and most of the seaports, even from the 100-year extreme sea level under 1.5 °C SWL. In the absence of effective technical adaptation measures, both operational disruptions and coastal inundation are projected to increasingly affect all examined assets over the course of the century.     

Linking mean pore velocity and dispersivity to pore velocity distribution by advection–dispersion and stream tube modeling

Environmental Fluid Mechanics - A large set of experimental solute tracer breakthrough data (corresponding to more than 350 individual tracer breakthrough curves) in eight granular filter...     

Robotic testing of radio frequency devices designed for industrial safety

An experimental setup is proposed to test the performance of safety devices based on radio frequency technology. The setup specifically tests devices designed for improving safety in dangerous areas of small size, such as those surrounding power press brakes. Tested here is a radio frequency identification (RFID) prototype, whose main objective is to prevent accidents by sending a stop signal to a machine when a worker’s wrist, bearing an RFID tag, gets too close to the dangerous area. An ABB IRB 2400L robot is used as a reference system; this system is capable of providing millimeter accuracy. A plastic hand and a wristband with at least one passive RFID tag are attached to the end of the robot arm, which emulates the behavior of a human arm. With this robotic approach, it is possible to test trajectories with different velocities and orientations and to simulate several risky situations associated with machine use. Several experiments are presented that were conducted with the RFID prototype, and statistics are reported on the distance detection capability of this safety system with respect to the plane that defines the dangerous area. A matrix approach is proposed for analyzing the robustness of safety devices that are designed to automatically prevent a worker entering in dangerous areas. The results show the benefits that development of a radio frequency device of this class could confer towards increasing worker safety.     

Separation of plastic waste via the hydraulic separator Multidune under different geometric configurations

The recovery of high-quality plastic materials is becoming an increasingly challenging issue for the recycling sector. Technologies for plastic recycling have to guarantee high-quality secondary raw material, complying with specific standards, for use in industrial applications. The variability in waste plastics does not always correspond to evident differences in physical characteristics, making traditional methodologies ineffective for plastic separation. The Multidune separator is a hydraulic channel allowing the sorting of solid particles on the basis of differential transport mechanisms by generating particular fluid dynamic conditions due to its geometric configuration and operational settings. In this paper, the fluid dynamic conditions were investigated by an image analysis technique, allowing the reconstruction of velocity fields generated inside the Multidune, considering two different geometric configurations of the device, Configuration A and Configuration B. Furthermore, tests on mono- and bi-material samples were completed with varying operational conditions under both configurations. In both series of experiments, the bi-material samples were composed of differing proportions (85% vs. 15%) to simulate real conditions in an industrial plant for the purifying of a useful fraction from a contaminating fraction. The separation results were evaluated in terms of grade and recovery of the useful fraction.