Effect of modified Fenton treatment on the thermal behavior of contaminated harbor sediments

This study presents the results of experimental Fenton-like treatments conducted on marine sediment slurries (2g sediment vs. 20 ml liquid). The sediment was collected in a harbor situated in a high density industrial area, characterized by a great hydrocarbon C>12 and PAHs contamination. The investigated parameters were: the H(2)O(2) dose, the reagent's pH and the effect of a phosphate salt and ferrous iron addition. To evaluate sediment's characteristics COD, particle size, thermogravimetric and differential thermal analyses were performed under N(2) and O(2) atmosphere while dissolved organic carbon and COD analyses were performed on the filtrate. Results indicate that the treatment was able to change the organic matter to a less hydrophobic state, to destroy part of the organic carbon (up to 78% decrease of the 200-400 degrees C labile organic matter), to lower the COD of the sediment (60% COD removal maximum) and to increase the cumulated distribution undersize. In addition as the treated sediment showed easier-to-handle characteristics, reduced caking and lower aggregation capacity, the modified Fenton treatment could also be considered a pre-treatment of a successive thermal treatment.     

Assessment of the effects of soil PAH accumulation by a battery of ecotoxicological tests

Surface soils were collected at remote, urban and industrial sites in the Southern of Italy in order to evaluate PAH concentrations and assess the toxic effects by a battery of ecotoxicological tests. The tests were performed on whole soils and on both organic and aqueous extracts. Further goal of this study was to integrate the results coming from each test and matrix in a synthetic toxicity index. The highest summation sigmaPAH concentrations were measured at the industrial soil, although this one did not show an high ecotoxicological risk. Among the performed tests, the phytotoxicity tests showed the highest sensitivity. For whole soil, the worst case always has been represented by test through bacteria. Our results could represent the first step toward the selection of a proper battery to characterize the soil ecotoxicological risk.     

The role of environmental and socio-demographic indicators in the analysis of land use changes in a protected area of the Natura 2000 Network: the case study of Lake Trasimeno,Umbria, Central Italy

This article sets out to analyse how and to what degree land use is linked to the physical characteristics of the territory itself, and the way in which changes in land use are determined by agricultural and socio-demographic dynamics. The study was conducted within the territorial boundaries of five municipalities surrounding Lake Trasimeno and refers to the periods 1977–2000 for land use and 1971–2001 for socio-demography data. The use of environmental, social, economic and agricultural indicators demonstrates how a mix of various indicators are useful for monitoring the changes which took place. It also shows the powerful influence that socio-demographic factors exert upon land use and landscape change.     

The LUCAS topsoil database and derived information on the regional variability of cropland topsoil properties in the European Union

Approximately 20,000 topsoil samples were collected in 25 European Union (EU) Member States (EU-27 except Bulgaria and Romania) with the aim to produce the first coherent pan-European physical and chemical topsoil database, which can serve as baseline information for an EU wide harmonized soil monitoring. The soil sampling was undertaken within the frame of the Land Use/Land Cover Area Frame Survey (LUCAS), a project to monitor changes in the management and character of the land surface of the EU. Soil samples have been analysed for basic soil properties, including particle size distribution, pH, organic carbon, carbonates, NPK, cation exchange capacity (CEC) and multispectral signatures. Preliminary studies show the outstanding potential of the dataset for enhancing the knowledge base on soils in the EU. The current paper provides an introduction to the LUCAS Topsoil 2009 project and provides an example of data applicability for cropland assessment by highlighting initial results for regional and national comparisons.     

Exploring the multiplicity of soil–human interactions: organic carbon content,agro-forest landscapes and the Italian local communities

Environmental Monitoring and Assessment - Marine ecosystems provide many ecosystem goods and services. However, these ecosystems and the benefits they create for humans are subject to competing...     

Land use and land cover (LULC) of the Republic of the Maldives: first national map and LULC change analysis using remote-sensing data

The Maldives islands in recent decades have experienced dramatic land-use change. Uninhabited islands were turned into new resort islands; evergreen tropical forests were cut, to be replaced by fields and new built-up areas. All these changes happened without a proper monitoring and urban planning strategy from the Maldivian government due to the lack of national land-use and land-cover (LULC) data. This study aimed to realize the first land-use map of the entire Maldives archipelago and to detect land-use and land-cover change (LULCC) using high-resolution satellite images and socioeconomic data. Due to the peculiar geographic and environmental features of the archipelago, the land-use map was obtained by visual interpretation and manual digitization of land-use patches. The images used, dated 2011, were obtained from Digital Globe’s WorldView 1 and WorldView 2 satellites. Nine land-use classes and 18 subclasses were identified and mapped. During a field survey, ground control points were collected to test the geographic and thematic accuracy of the land-use map. The final product’s overall accuracy was 85%. Once the accuracy of the map had been checked, LULCC maps were created using images from the early 2000s derived from Google Earth historical imagery. Post-classification comparison of the classified maps showed that growth of built-up and agricultural areas resulted in decreases in forest land and shrubland. The LULCC maps also revealed an increase in land reclamation inside lagoons near inhabited islands, resulting in environmental impacts on fragile reef habitat. The LULC map of the Republic of the Maldives produced in this study can be used by government authorities to make sustainable land-use planning decisions and to provide better management of land use and land cover.     

Lettuce plants as bioaccumulators of trace elements in a community of central Italy

A survey, based on the use of vascular plants to describe the distribution of selected elements (21 in total) was performed in 11 sites in the area of Castelfiorentino (Tuscany, Central Italy) differing for land use, from urban to industrial and rural areas. Lettuce plants grown under standardized conditions were positively used as biodeposimeters of airborne trace elements. Washing was found to be highly significant in reducing concentrations of many elements in the samples, suggesting a general surface contamination of leaves. The typical crustal element Al showed good correlations with Co, Fe, Li and V; on the contrary, Zn and Cd were intercorrelated and showed no connection with crustal indicators. Lead was still a relevant environmental presence, as the experiments were carried out before the ban of leaded gasoline. Source apportionment by factor analysis put in evidence a major contribution of crustal materials, followed by man-related activities; a minor role was ascertained for marine aerosol. A comparison was made between analytical data of lettuce plants grown in our experimental sites and a bulk of commercial lettuce purchased at a local supermarket. It should be stressed how Cu concentrations of commercial material were significantly higher than those found in our plants; this is likely caused by phytosanitary treatments.     

Furniture wood wastes: Experimental property characterisation and burning tests

Referring to the industrial wood waste category (as dominant in the provincial district of Pesaro-Urbino, Marche Region, Italy), this paper deals with the experimental characterisation and the carrying out of non-controlled burning tests (at lab- and pilot-scale) for selected “raw” and primarily “engineered” (“composite”) wood wastes.The property characterisation has primarily revealed the following aspects: potential influence on moisture content of local weather conditions at outdoor wood waste storage sites; generally, higher ash contents in “engineered” wood wastes as compared with “raw” wood wastes; and relatively high energy content values of “engineered” wood wastes (ranging on the whole from 3675 to 5105 kcal kg⁻¹ for HHV, and from 3304 to 4634 kcal kg⁻¹ for LHV).The smoke qualitative analysis of non-controlled lab-scale burning tests has primarily revealed: the presence of specific organic compounds indicative of incomplete wood combustion; the presence exclusively in “engineered” wood burning tests of pyrroles and amines, as well as the additional presence (as compared with “raw” wood burning) of further phenolic and containing nitrogen compounds; and the potential environmental impact of incomplete industrial wood burning on the photochemical smog phenomenon.Finally, non-controlled pilot-scale burning tests have primarily given the following findings: emission presence of carbon monoxide indicative of incomplete wood combustion; higher nitrogen oxide emission values detected in “engineered” wood burning tests as compared with “raw” wood burning test; and considerable generation of the respirable PM₁ fraction during incomplete industrial wood burning.     

Comparison of environmental impacts related to municipal solid waste and construction and demolition waste management and recycling in a Latin American developing city

Environmental Science and Pollution Research - Construction and demolition waste (CDW) and municipal solid waste (MSW) are the waste flows mostly generated at a global level. In developing...     

The quantitative real-time PCR applications in the monitoring of marine harmful algal bloom (HAB) species

In the last decade, various molecular methods (e.g., fluorescent hybridization assay, sandwich hybridization assay, automatized biosensor detection, real-time PCR assay) have been developed and implemented for accurate and specific identification and estimation of marine toxic microalgal species. This review focuses on the recent quantitative real-time PCR (qrt-PCR) technology developed for the control and monitoring of the most important taxonomic phytoplankton groups producing biotoxins with relevant negative impact on human health, the marine environment, and related economic activities. The high specificity and sensitivity of the qrt-PCR methods determined by the adequate choice of the genomic target gene, nucleic acid purification protocol, quantification through the standard curve, and type of chemical detection method make them highly efficient and therefore applicable to harmful algal bloom phenomena. Recent development of qrt-PCR-based assays using the target gene of toxins, such as saxitoxin compounds, has allowed more precise quantification of toxigenic species (i.e., Alexandrium catenella) abundance. These studies focus only on toxin-producing species in the marine environment. Therefore, qrt-PCR technology seems to offer the advantages of understanding the ecology of harmful algal bloom species and facilitating the management of their outbreaks.