Sunlight-induced degradation of soil-adsorbed veterinary antimicrobials Marbofloxacin and Enrofloxacin

Marbofloxacin (MAR) and Enrofloxacin (ENR), two largely employed veterinary Fluoroquinolones (FQs), were found to be present at the micrograms per kilogram level in agricultural soils of South Lombardy (Italy) several months after manuring. Distribution coefficients (K_d) from sorption experiments indicated a strong binding to the soil. Soil samples fortified with environmentally significant FQs amounts (0.5 mg kg⁻¹) were exposed to solar light that promoted extensive degradation (80%) of both drugs in 60-150 h. Thus, photochemistry could be considered a significant depollution path in the soil, although it was two orders of magnitudes slower than in aqueous solution and a fraction of the drug (ca. 20%) remained unaffected. For MAR the photoprocess was the same as in solution, and involved cleavage of the tetrahydrooxadiazine ring. On the contrary, with ENR only some of the photoproducts determined in water (those arising from a stepwise oxidation of the piperazine side chain) were observed. Substitution of the 6-fluoro by a hydroxyl group and reduction did not occur in the soil, supporting the previous contention that such processes required polar solvation of FQs. Consistently with this rationalization, the irradiation of thin layers of solid drugs led to essentially the same products distribution as in the soil. From the environmental point of view it is important to notice that photodegradation mainly affects the side-chains, while the fluoroquinolone ring, to which the biological effect is associated, is conserved up to the later stages of the degradation.     

Monitoring of polycyclic aromatic hydrocarbons in a produced water disposal area in the Potiguar Basin,Brazilian equatorial margin

Environmental Science and Pollution Research - The Potiguar Basin has oil and gas production fields offshore and onshore. All treated produced water (PW) from these fields is discharged through...     

Cytotoxic response in human lung epithelial cells and ion characteristics of urban-air particles from Torino,a northern Italian city

Recently, much attention has been devoted to urban air pollution because epidemiological studies have reported health impacts related to particulate matter (PM). PM10 and PM2.5 were collected during different seasons in Torino, a northern Italian city, and were characterised by inorganic chemical species (secondary particulates and bio-available iron). The biological effects of aqueous and organic solvent PM extracts on human epithelial lung A549 were evaluated, and the effects on cell proliferation and lactate dehydrogenase (LDH) release were assayed. The average PM10 concentration during the sampling period was 47.9?±?18.0 μg/m³; the secondary particles accounted for 49 %?±?9 % of the PM10 total mass, and the bio-available iron concentration was 0.067?±?0.045 μg/m³. The PM2.5/PM10 ratio in Torino ranged from 0.47 to 0.90 and was higher in cold months than in warm months. The PM10 and PM2.5 extracts inhibited cell proliferation and induced LDH release in a dose-dependent manner with a seasonal trend. The PM10 extract had a stronger effect on LDH release, whereas the PM2.5 extract more strongly inhibited cell proliferation. No significant differences were observed in the effects induced by the two extracts, and no significant correlations were found between the biological effects and the PM components evaluated in this study, thus emphasising the importance of the entire mixture in inducing a cytotoxic response.     

Spatial scales of variation in lichens: implications for sampling design in biomonitoring surveys

The variability of biological data is a main constraint affecting the quality and reliability of lichen biomonitoring surveys for estimation of the effects of atmospheric pollution. Although most epiphytic lichen bioindication surveys focus on between-site differences at the landscape level, associated with the large scale effects of atmospheric pollution, current protocols are based on multilevel sampling, thus adding further sources of variation and affecting the error budget. We test the hypothesis that assemblages of lichen communities vary at each spatial scale examined, in order to determine what scales should be included in future monitoring studies. We compared four sites in Italy, along gradients of atmospheric pollution and climate, to test the partitioning of the variance components of lichen diversity across spatial scales (from trunks to landscapes). Despite environmental heterogeneity, we observed comparable spatial variance. However, residuals often overcame between-plot variability, leading to biased estimation of atmospheric pollution effects.     

Degradation of para-hydroxybenzoic acid by means of mixed microbial cultures

Olive mill wastewater contains some phenolic compounds that cause antibacterial activity of a kind that prevents biological treatment without previous dilution. Among these phenolic compounds, p-hydroxybenzoic acid (PHB) is considered to be one of the most representative. This work examines the biodegradation of PHB by aerobic microbial mixed cultures previously acclimatized to glucose, which was used as an easily biodegradable model compound. Microbial growth runs were carried out in a batch reactor in the PHB concentration range of 200-1000 mg/L. In all the runs the PHB proved to be completely degradable. The specific growth rates obtained were in the range of 0.16-0.35 l/h. Experimental runs showed that the functional relationship between the specific growth rate and PHB concentration was that proposed by Monod. The kinetic constants of the Monod equation (mu(max) and K(S)) and biomass yield coefficient (Y) were determined experimentally. With the parameter values thus obtained, a mathematical model that also takes account of the duration of the lag phase was employed to describe both the microbial growth and the consumption of PHB. The concentration values of the model fit well with the data obtained experimentally.     

Freshwater discharge from the drainage basin to the Venice Lagoon (Italy)

The twelve major tributaries of the Venice Lagoon (accounting for the 97% of the inputs from the drainage basin) were monitored in the framework of the DRAIN project (1998-2000) in order to obtain a detailed knowledge on the hydrological regimes and to measure the mean annual freshwater discharge from surface runoff. The study represents an essential step in the estimate of the pollutant load delivered to the lagoon that must necessarily be based on a solid understanding of the fluxes of material out of the drainage basin. Due to the influence of the tide in the majority of the gauging sections, a specific methodology for the measurement of the discharge was developed. The main results of the study are described, underlining the differences in the regime of the investigated streams. A rainfall-runoff analysis evidenced the different characteristics of the monitored tributaries, in terms of specific hydrological features, morphology of the individual sub-basins, management of the water resource and spatial distribution of rainfall. An estimate of the maximum peak discharge from the drainage basin is finally obtained from data of an extreme flood event occurred in November 1999.     

Detection of Hepatitis E Virus in Livers and Muscle Tissues of Wild Boars in Italy

Food and Environmental Virology - In industrialized countries, hepatitis E is now recognized as an emerging zoonosis. Autochthonous cases have been increased over recent years in Europe and are...     

Environmental impact assessment of a WtE plant after structural upgrade measures

The study focuses on analysing the evolution of environmental impacts caused by a medium–large Italian WtE plant before and after revamping and maintenance operations, with the aim of providing an evaluation of how much these structural upgrade measures may affect the total environmental performance.LCA methodology was applied for the modelling and comparison of six WtE scenarios, each describing the main structural upgrades carried out in the plant over the years 1996–2011. The comparison was conducted by adopting 1 ton of MSW as the functional unit, and the net contribution from energy recovery to power generation was distinguished by defining consistent national grid electricity mixes for every year considered. The Ecoindicator99 2.09 impact assessment method was used to evaluate the contribution to midpoint and endpoint categories (e.g. carcinogens, respiratory inorganics and organics, climate change, damage to human health). Lastly, the “Pedigree quality matrix” was applied to verify the reliability and robustness of the model created.As expected, the results showed better environmental scores after both the implementation of new procedures and the integration of operations. However, while a net reduction of air emissions seems to be achievable through dedicated flue gas treatment technologies, outcomes underscored potentials for improving the management of bottom ash through the adoption of alternative options aimed to use that solid residue mainly as filler, and to decrease risks from its current disposal in landfill. If the same effort that is put into flue gas treatment were devoted to energy recovery, the targets for the WtE plant could be easily met, achieving a higher sustainability. This aspect is even more complex: national policies for implementing greener and renewable energy sources would result in a lower impact of the national energy mix and, hence, in a lower net avoided burden from energy recovery.The study confirmed the expected improvements, indicating quantitatively the lower environmental impact resulting from structural upgrade operations in a WtE plant. Furthermore, the work highlights the importance of considering the evolution of the national energy mix in LCA studies, especially during the present years of transition from fossil fuels to renewable sources.     

Missing safety measures led to the jet fire and seven deaths at a steel plant in Turin. Dynamics and lessons learned

The Authors of this paper are the technical experts that were entrusted by the Public Prosecutor to conduct the technical inquiry into the accident that occurred in the ThyssenKrupp plant in Torino on December 6, 2007. The paper contains the results of the inquiry under the above mentioned point of view. The dynamics of the accident, the main causes and the consequences have been defined.This was an unusual accident from which important lessons can be learned. On December 6, a modest fire developed in the entry section of a pickling and annealing line in the TK plant in Turin. The eight workers on duty seized the firefighting equipment and started to try to extinguish the fire. The workers had portable fire extinguishers and a fire hydrant, so they had to get close to the fire to fight it. Suddenly, a violent jet fire, caused by the rupture of a hydraulic circuit, occurred. The flame instantaneously struck the eight workers while they were still fighting the fire. Seven workers suffered very serious burns, one died instantaneously while the other six had over the following month. One of the workers, who was partly protected by an operating machine, suffered only minor burns and survived. The paper contains some important lessons that have been learned from the present case, which demonstrate that the fire risk at pickling and annealing lines has generally been underestimated by the steel industry. The fire risk due to hydraulic actuators is also evident and new fire fighting strategies are suggested.