Evaluation of groundwater contamination in a coastal area of south-eastern Sicily

This investigation was under taken to evaluate the groundwater resources contamination due to intensive agricultural practices (particularly greenhouses). The study-area is located in the coastal area of the Ragusa province (South-East Sicily), where numerous existing greenhouses may cause the contamination of groundwater systems (unconfined and confined aquifers) beneath the cropped land. The pollution risk is mainly related with the seepage process of macro-elements nitrogen (N), phosphorus (P), potassium (K), held in the irrigation water and the massive use of fertilizers and pesticides, that may pass through the unsaturated zone of the soil profile. Moreover, the area is characterized by the presence of several wells (about 15 wells/km2) for agricultural use that cause the aquifer overexploitation and the consequent risk of seawater intrusion. The agriculture practices adopted in the study area (irrigation volumes, fertilizer concentrations, use of pesticides…) were monitored since February 2009; moreover, the pollution risk of the aquifers was evaluated through the analysis of groundwater water samples collected (monthly) in the monitoring wells; in particular, nitrogen compounds, soluble phosphorous (PO?2?), potassium, as well as the main pesticides commonly used in the study area, were measured.The results show that electrical conductivity and chloride concentration values can cause reduction of production and leaf damage problems, respectively, for most of the monitored farm systems. The high nitrogen compounds concentrations observed in the monitored wells can cause health and environmental problems. Moreover high pesticide contamination of groundwater was found in two of the five monitored wells.     

Novel imazethapyr detoxification applying advanced oxidation processes

Different degradation methods have been applied to assess the suitability of advanced oxidation process (AOPs) to promote mineralization of imazethapyr [(RS)-5-ethyl-2-(4-isopropyl-4-methyl-5-oxo-2-imidazolin-2-yl)nicotinic acid], a widely used imidazolinone class herbicide, the persistence of which has been demonstrated in surface and ground waters destined to human uses. Independent of the oxidation process assessed, the decomposition of imazethapyr always followed a pseudo-first order kinetic. The direct UV-irradiation (UV) of the herbicide as well as its oxidation with ozone (O?), and hydrogen peroxide tied to UV-irradiation (H?O?/UV) were sufficiently slow to permit the identification of intermediate products, the formation pathway of which has been proposed. Ozonation joined to UV-irradiation (O?/UV), ozonation joined to titanium dioxide photo-catalysis (TiO?/UV+O?), sole photo-catalysis (TiO?/UV), and photo-catalysis reinforced with hydrogen peroxide-oxidation (TiO?/UV+H?O?) were characterized by a faster degradation and rapid formation of a lot of small molecules, which were quickly degraded to complete mineralization. The most effective oxidation methods were those using titanium dioxide photo-catalysis enhanced either by ozonation or hydrogen peroxide. Most of all, these last processes were useful to avoid the development of dangerous by-products.     

Material and energy recovery in integrated waste management systems. An evaluation based on life cycle assessment

This paper reports the environmental results, integrated with those arising from mass and energy balances, of a research project on the comparative analysis of strategies for material and energy recovery from waste, funded by the Italian Ministry of Education, University and Research. The project, involving the cooperation of five University research groups, was devoted to the optimisation of material and energy recovery activities within integrated municipal solid waste (MSW) management systems. Four scenarios of separate collection (overall value of 35%, 50% without the collection of food waste, 50% including the collection of food waste, 65%) were defined for the implementation of energetic, environmental and economic balances. Two sizes of integrated MSW management system (IWMS) were considered: a metropolitan area, with a gross MSW production of 750,000 t/year and an average province, with a gross MSW production of 150,000 t/year. The environmental analysis was conducted using Life Cycle Assessment methodology (LCA), for both material and energy recovery activities. In order to avoid allocation we have used the technique of the expansion of the system boundaries. This means taking into consideration the impact on the environment related to the waste management activities in comparison with the avoided impacts related to the saving of raw materials and primary energy. Under the hypotheses of the study, both for the large and for the small IWMS, the energetic and environmental benefits are higher than the energetic and environmental impacts for all the scenarios analysed in terms of all the indicators considered: the scenario with 50% separate collection in a drop-off scheme excluding food waste shows the most promising perspectives, mainly arising from the highest collection (and recycling) of all the packaging materials, which is the activity giving the biggest energetic and environmental benefits. Main conclusions of the study in the general field of the assessment of the environmental performance of any integrated waste management scheme address the importance of properly defining, beyond the design value assumed for the separate collection as a whole, also the yields of each material recovered; particular significance is finally related to the amount of residues deriving from material recovery activities, resulting on average in the order of 20% of the collected materials.     

Mobility of heavy metals from polluted sediments of a semi-enclosed basin: in situ benthic chamber experiments in Taranto’s Mar Piccolo (Ionian Sea,Southern Italy)

In situ benthic flux experiments were conducted at two stations in the Mar Piccolo of Taranto (Italy), one of the most industrialised and contaminated coastal areas of the Mediterranean. Sediments of the two stations are notably different in their trace metal content, with a station closer to a Navy harbour showing higher mean concentrations of almost all investigated metals (Al, As, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, V and Zn). Conversely, both stations are characterised by significant Hg contamination, compared to the local baseline. Results of a sequential extraction scheme on surface sediments suggest a relatively scarce mobility of the examined metals (Zn > Ni > Cr > As > Cu > Pb). A Hg-specific extraction procedure showed that most of the element (93.1 %) occurs in a fraction comprising Hg bound to Fe/Mn oxi-hydroxides. Reduction of these oxides may affect Hg remobilisation and redistribution. Porewater profiles of dissolved trace metals were quite similar in the two sites, although significant differences could be observed for Al, Cu, Fe and Hg. The highest diffusive fluxes were observed for As, Fe and Mn. Mobility rates of several trace elements (Al, As, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, V and Zn) were directly measured at the sediment–water interface. Results from benthic in situ incubation experiments showed increasing dissolved metal concentrations with time, resulting in higher fluxes for Cu, Fe, Hg, V and Zn in the most contaminated site. Conversely, fluxes of Mn, Ni and Pb were comparable between the two stations. The estimated flux of Hg (97 μg m^?2 day^?1) was the highest observed among similar experiments conducted in other highly contaminated Mediterranean coastal environments. Benthic fluxes could be partially explained by considering rates of organic matter remineralisation, dissolution of Fe/Mn oxy-hydroxides and metal speciation in sediments. Seasonal and spatial variation of biogeochemical parameters can influence metal remobilisation in the Mar Piccolo area. In particular, metals could be promptly remobilised as a consequence of oxygen depletion, posing a serious concern for the widespread fishing and mussel farming activities in the area.     

Effects of gas flow rate, inlet concentration and temperature on the biofiltration of toluene vapors

In this work the variation in the elimination capacity of a biofilter as a function of the gas flow and toluene concentration was studied. A bioreactor 0.75 m high x 14.5 cm diameter was used, divided into three equal stages, using compost to support the microorganisms, and sea shells to control the pH. The biofiltration of toluene was evaluated for flows between 0.12 and 0.73 m(3)h(-1) in a concentration range of 1-3.2 gm(-3). It was observed that on increasing the toluene inlet load by 90% (from 37 to 70 gm(3)h(-1)), the conversion by the biofilter varied by only 5% (from 98% to 93%). The biofiltration system used achieved elimination capacities of up to 82 gm(-3)h(-1) for a toluene load of 100 gm(-3)h(-1).     

A quantitative estimate of potential aluminium recovery from incineration bottom ashes

The recovery of ferrous and non ferrous metals from the bottom ashes is a common practice in the most part of Europe, both for the environmental advantages of their recycle and to avoid problems of swelling and expansion that metals can cause when bottom ashes are reused in concrete production or in road construction. This paper focuses on metal recovery from bottom ashes produced in Municipal Solid Waste (MSW) incinerators, with a particular focus on aluminium. A forecasting model was developed in order to evaluate the quantity of aluminium scraps recoverable from the bottom ashes. The model was applied to the Italian situation but its validity can be extended to other countries. Focusing on Italy, by applying conventional technologies for the separation of non-ferrous metals, the amount of aluminium potentially recoverable from bottom ashes is estimated in the range from 16,500 to 21,000 tonnes at the year 2015, and from 19,000 to 28,500 tonnes at 2020.     

Sustainability: A Study of the Level of Ecological Behavior of Postgraduate Students in Brazil

The decline in the supply of natural resources is a cause for concern, especially given continued worldwide population growth. New habits and attitudes toward resource use are slowly being introduced into the everyday lives of persons residing in a number of countries. The term “ecological behavior” refers to acting in favor of the environment, whether these actions are voluntarily or not, or learned or not (Pato & Tamayo, 2006 ). The general objective of this study is to identify the environmental behavior—one of several terms used interchangeably with ecological behavior—of graduate students from a Brazilian federal institution of higher education. We chose this particular group because many of them already act, or will act, as professors. Thus, by virtue of their positions, they will function as opinion leaders who will influence the education of future professionals, establishing a chain through which shared values can gradually change the environmental behavior of society.     

Identification of Quarries Rehabilitation Scenarios: A Case Study Within the Metropolitan Area of Bari (Italy)

This paper addresses quarries rehabilitation issue within a Metropolitan Area. Areas where mining activity is carried out have been subjected to physical and environmental degradation linked both to pursue the building materials extraction and to the city expansion continuously asking for new areas to be developed with residential and service functions. These changes also occurred where environmental and landscape values are present. It has been therefore pointed out the issue of such areas redevelopment that, to be functionally reintegrated, must be consistently linked to the activities and the territorial local contexts characteristics. In this paper the quarries reuse issue is carried out through parameters identification able to define the quarries relationship with the neighboring towns and with their surroundings besides to identify their physical, environmental and landscaping characteristics. Quarry reuse alternatives have been identified among those consistent with the rehabilitation goals, as defined by the planning sector and internationally approved, while their selection is derived from the application of a two-step methodology: a multi-criteria analysis related to punctual parameters at a "site-specific" level, followed by a further territorial indicators checking over the wide area. This application has led to socially accepted results identifying the examined quarries for reuses ranging from agricultural-forestry and urban to functional or naturalistic. The proposed method has also proved to be suitable to address the abandoned quarries reuse problem with a systemic and consultative approach, as it is able to correlate the many variables present in the social and spatial complexity of the Metropolitan Areas.