Honeybees (<Emphasis Type="Italic">Apis mellifera</Emphasis>) as a biological barrier for contamination of honey by environmental toxic metals

The aim of the study was to investigate the transfer of toxic metals from honeybee workers (Apis mellifera L.) to bee honey in relation to the ecological state of the environment. The materials of the study consisted of samples of honeybee bodies and varietal honeys taken from the same apiary located in three areas: R1—urbanized (16), R2—ecologically clean (16) and R3—industrialized (15) of south-eastern Poland. The contents of 14 elements in all tested samples, including toxic metals (Cd, Pb, Hg, Al, Ni, Tl) as well as bioelements (K, Mg, Ca, Mn, Fe, Zn, Cu, Se), were analysed by the ICP-OES method with prior microwave mineralization. The concentrations of the majority of the studied elements, excluding aluminum and lead, were significantly higher in bee bodies than in honey samples (P?<?0.05). The pollution of bee bodies by toxic metals was dependent on the environmental cleanliness, and the most pollution was observed in the industrialized area. The bee body was the most effective barrier for Cd and Tl transfer to the honey, while the level of Ni was similar in both tested materials. The Al concentration was significantly higher in honey than bee bodies (14.81?±?24.69 and 6.51?±?5.83 mg kg^?1, respectively), which suggests the possibility of secondary contamination of honey. The greatest sensitivity to heavy metal pollution was observed in honeydew honey compared to nectar honeys (P?<?0.05). It was proved for the first time that bees work as biofilters for toxic metals and prevent honey contamination.     

Comparison of summer and winter California central valley aerosol distributions from lidar and MODIS measurements

Aerosol distributions from two aircraft lidar campaigns conducted in the California Central Valley are compared in order to identify seasonal variations. Aircraft lidar flights were conducted in June 2003 and February 2007. While the ground PM_2.5 (particulate matter with diameter ≤ 2.5 μm) concentration was highest in the winter, the aerosol optical depth (AOD) measured from the MODIS and lidar instruments was highest in the summer. A multiyear seasonal comparison shows that PM_2.5 in the winter can exceed summer PM_2.5 by 68%, while summer AOD from MODIS exceeds winter AOD by 29%. Warmer temperatures and wildfires in the summer produce elevated aerosol layers that are detected by satellite measurements, but not necessarily by surface particulate matter monitors. Temperature inversions, especially during the winter, contribute to higher PM_2.5 measurements at the surface. Measurements of the mixing layer height from lidar instruments provide valuable information needed to understand the correlation between satellite measurements of AOD and in situ measurements of PM_2.5. Lidar measurements also reflect the ammonium nitrate chemistry observed in the San Joaquin Valley, which may explain the discrepancy between the MODIS AOD and PM_2.5 measurements.     

An urban emissions inventory for South America and its application in numerical modeling of atmospheric chemical composition at local and regional scales

This work describes the development of an urban vehicle emissions inventory for South America, based on the analysis and aggregation of available inventories for major cities, with emphasis on its application in regional atmospheric chemistry modeling. Due to the limited number of available local inventories, urban emissions were extrapolated based on the correlation between city vehicle density and mobile source emissions of carbon monoxide (CO) and nitrogen oxides (NOx). Emissions were geographically distributed using a methodology that delimits urban areas using high spatial resolution remote sensing products. This numerical algorithm enabled a more precise representation of urban centers. The derived regional inventory was evaluated by analyzing the performance of a chemical weather forecast model in relation to observations of CO, NOx and O₃ in two different urban areas, São Paulo and Belo Horizonte. The gas mixing ratios simulated using the proposed regional inventory show good agreement with observations, consistently representing their hourly and daily variability. These results show that the integration of municipal inventories in a regional emissions map and their precise distribution in fine scale resolutions are important tools in regional atmospheric chemistry modeling.     

Cesium-137 contamination of oak (Quercus petrae Liebl.) from sub-mediterranean zone in South Bulgaria

This study focuses on the cesium-137 (¹³⁷Cs) contamination in grass and in different compartments of oak trees growing in ecosystems, located in the zone with sub-mediterranean climate in South Bulgaria, characterized with high summer temperatures, low precipitation and often periods of drought. In 2008, three experimental sites - PP1, PP2, PP3 - were sampled in oak ecosystems from Maleshevska Mountain at 900 m above sea level. Samples from grass species and oak tree leaves, branches with different diameter, wood disks and bark were analyzed for ¹³⁷Cs activity with γ-spectrometry. The soil-to-plant transfer factor (TF) values for ¹³⁷Cs were estimated differentiating different tree compartments. Our findings showed relatively high activity concentrations of ¹³⁷Cs in oak trees even 22 years after the Chernobyl accident. The grass under oak was less contaminated compared with the oak trees. The different organs of oak trees could be distinguished according to the ¹³⁷Cs contamination as follows: bark > branches (d < 1 cm) > leaves > branches (d > 3 cm) > wood. The relatively higher contamination of bark compared with the new-formed biomass suggested that a significant part of ¹³⁷Cs was accumulated as a result of direct adsorption at the time of the main contamination event. The TF values obtained and the presence of ¹³⁷Cs in the branches, leaves and in the wood formed after 1986 confirmed that 22 years after the contamination, the main mechanism of ¹³⁷Cs entrance in tree biomass was the root uptake.     

Inferring chemical effects on carbon flows in aquatic food webs: Methodology and case study

The majority of ecotoxicological enclosure experiments monitor species abundances at different chemical concentrations. Here, we present a new modelling approach that estimates changes in food web flows from such data and show that population- and food web level effects are revealed that are not apparent from abundance data alone. For the case of cypermethrin in freshwater enclosures, photosynthesis and excretion (d⁻¹) of phytoplankton at 3.643 μg L⁻¹ cypermethrin were 30% lower and 100% higher than in the control, respectively. The ingestion rate of mesozooplankton (d⁻¹) was 6 times higher in the treated enclosures than in the control as food concentration increased with insecticide exposure. With increasing cypermethrin concentrations, nanoflagellates progressively relied on phytoplankton as their main food source, which rendered the food web less stable. We conclude that this tool has excellent potential to analyse the wealth of enclosure data as it only needs species abundance and general constraints.     

The relation between Acid Volatile Sulfides (AVS) and metal accumulation in aquatic invertebrates: Implications of feeding behavior and ecology

The present study evaluates the relationship between Acid Volatile Sulfides (AVS) and metal accumulation in invertebrates with different feeding behavior and ecological preferences. Natural sediments, pore water and surface water, together with benthic and epibenthic invertebrates were sampled at 28 Flemish lowland rivers. Different metals as well as metal binding sediment characteristics including AVS were measured and multiple regression was used to study their relationship with accumulated metals in the invertebrates taxa.Bioaccumulation in the benthic taxa was primarily influenced by total metal concentrations in the sediment. Regarding the epibenthic taxa metal accumulation was mostly explained by the more bioavailable metal fractions in both the sediment and the water. AVS concentrations were generally better correlated with metal accumulation in the epibenthic invertebrates, rather than with the benthic taxa. Our results indicated that the relation between AVS and metal accumulation in aquatic invertebrates is highly dependent on feeding behavior and ecology.     

Distribution of polycyclic aromatic hydrocarbons in urban stormwater in Queensland, Australia

This paper reports the distribution of Polycyclic Aromatic Hydrocarbons (PAHs) in wash-off in urban stormwater in Gold Coast, Australia. Runoff samples collected from residential, industrial and commercial sites were separated into a dissolved fraction (<0.45 μm), and three particulate fractions (0.45-75 μm, 75-150 μm and >150 μm). Patterns in the distribution of PAHs in the fractions were investigated using Principal Component Analysis. Regardless of the land use and particle size fraction characteristics, the presence of organic carbon plays a dominant role in the distribution of PAHs. The PAHs concentrations were also found to decrease with rainfall duration. Generally, the 1- and 2-year average recurrence interval rainfall events were associated with the majority of the PAHs and the wash-off was a source limiting process. In the context of stormwater quality mitigation, targeting the initial part of the rainfall event is the most effective treatment strategy. The implications of the study results for urban stormwater quality management are also discussed.     

Kinetics of the tropospheric formaldehyde loss onto mineral dust and urban surfaces

The kinetics of the heterogeneous reaction between gaseous HCHO and TiO₂/SiO₂ mineral coatings were investigated using a coated-wall flow tube to mimic HCHO loss on mineral aerosol and TiO₂ coated depolluting urban surfaces. The measured uptake kinetics were strongly enhanced when the flow tube was irradiated with 340–420 nm UV light with an irradiance of 1.45 mW cm^?2. The associated BET uptake coefficients ranged from (3.00 ± 0.45) × 10^?9 to (2.26 ± 0.34) × 10^?6 and were strongly dependent on HCHO initial concentration, relative humidity, temperature, and TiO₂ content in the mineral coating, which ranged from 3.5 to 32.5 ppbv, 6–70%, 278–303 K, and 1–100 %wt, respectively. The measured kinetics were well described using a Langmuir–Hinshelwood type formalism. The estimated uptake coefficients were used to discuss the importance of heterogeneous HCHO surface loss, in terms of deposition lifetimes, as compared to major homogeneous gas-phase losses such as OH reaction and photolysis. It is found that deposition may compete with gas-phase removal of HCHO in a dense urban environment if more than 10% of the urban surface is covered with TiO₂ treated material.     

A Generic Bio-Economic Farm Model for Environmental and Economic Assessment of Agricultural Systems

Bio-economic farm models are tools to evaluate ex-post or to assess ex-ante the impact of policy and technology change on agriculture, economics and environment. Recently, various BEFMs have been developed, often for one purpose or location, but hardly any of these models are re-used later for other purposes or locations. The Farm System Simulator (FSSIM) provides a generic framework enabling the application of BEFMs under various situations and for different purposes (generating supply response functions and detailed regional or farm type assessments). FSSIM is set up as a component-based framework with components representing farmer objectives, risk, calibration, policies, current activities, alternative activities and different types of activities (e.g., annual and perennial cropping and livestock). The generic nature of FSSIM is evaluated using five criteria by examining its applications. FSSIM has been applied for different climate zones and soil types (criterion 1) and to a range of different farm types (criterion 2) with different specializations, intensities and sizes. In most applications FSSIM has been used to assess the effects of policy changes and in two applications to assess the impact of technological innovations (criterion 3). In the various applications, different data sources, level of detail (e.g., criterion 4) and model configurations have been used. FSSIM has been linked to an economic and several biophysical models (criterion 5). The model is available for applications to other conditions and research issues, and it is open to be further tested and to be extended with new components, indicators or linkages to other models.     

What makes neighborhood different from home and city? Effects of place scale on place attachment

Several years ago Hidalgo and Hernandez reported a curvilinear, U-shaped, relationship between scale of place (apartment, neighborhood, city) and strength of attachment to the place. In this paper four studies are presented, carried out in four Central-European cities, that (1) confirmed the reported curvilinear relationship using five places (apartment, building, neighborhood, city district, city) in three out of four cities and for five items of the Place Attachment Scale, (2) revealed a consistent curvilinear, inverse U-shaped relationship between scale of place and percentage of variance of place attachment predicted by three groups of factors: physical (type of housing, size of building, upkeep and personalization of house precincts, etc.), social (neighborhood ties and sense of security in the residence place), and socio-demographic (age, education, gender, length of residence, family size), and (3) identified strength of direct and indirect effects of the three groups of predictors on attachment to the five types of places. The curvilinear relationship between place scale and place attachment was particularly strong in highly attractive cities and in those scale items that described people's emotional reactions to places whereas a linear relationship was obtained in the least attractive city and in the items that referred to sense of security, amount of control and knowledge of place. In all four cities the best predicted variable was attachment to middle ranges of the place scale (building and neighborhood). The overall best direct predictor of place attachment was neighborhood ties, followed by direct and indirect effects of length of residence, building size, and type of housing. In conclusion it is argued that the usual choice of predictors of place attachment is biased by researchers' interest in the middle scales of place (neighborhood) at the expense of other place scales. In the paper a claim is made that attachments to smaller (apartments, homes) and larger (city) scales of place along with their unique predictors deserve more attention from environmental psychologists.