聚丙烯基高分子功能材料吸附卷烟烟气中多种有害成分的应用

为了寻找能同时降低卷烟烟气中甲醛、乙醛、巴豆醛和颗粒物有害成分含量的离子交换树脂吸附材料,采用电镜扫描方法观察聚丙烯基阳离子树脂高分子功能材料的表面特征,应用压汞法分析其平均孔径、中值孔径、比孔容和比表面积,并测试了该材料的交换容量,采用环境试验舱检测法对比测试了该材料和活性炭降低卷烟烟气中甲醛、乙醛、巴豆醛和颗粒物有害成分含量的效果.结果表明,聚丙烯基高分子功能材料表面多斑点状突起,凹凸状明显,微孔和缝隙多,平均孔径为0.26 μm,中值孔径为149.3 μm,比孔容为19.23 cm3/g,比表面积为293.42 m2/g,交换容量为5.16 mmol/g,对烟气中甲醛、乙醛、巴豆醛和颗粒物的净化率分别达到79.6％、79.8％、82.8％和64.7％,而活性炭的净化率分别为20.3％、0、6.4％和54.2％.研究表明,该聚丙烯基高分子功能材料具有物理吸附和化学吸附性能,净化卷烟烟气中多种有害成分的效果明显优于活性炭.     

高寒条件下振弦式传感器在线测量尾矿坝浸润线的误差分析及对策

为减少和消除高寒条件下振弦式传感器在线测量浸润线的误差,通过理论分析和现场试验,对造成误差的因素及其影响情况进行了深入研究。结果表明,振弦式传感器产生测量误差的主要来源为设备安装深度的测量误差与尾矿水密度及重力加速度的取值误差,并提出了减少或消除误差的方法和工程技术措施,为高寒地区的浸润线在线精确测量提供了重要指导意义。     

多级强化地下水修复技术对NH_4~+-N的去除机制

为解决地下水污染修复技术中PT(抽出处理)和PRB(渗透性反应墙)存在的一些不足,搭建了MET(多级强化地下水修复技术)小试装置,以NH4+-N为目标污染物,研究MET对地下水中NH4+-N的去除效果及机制.结果表明,在进水水力负荷为14.68 m3/(m2·d)、ρ(NH4+-N)为25.0 mg/L的条件下,装置连续运行45 d,NH4+-N去除率呈先降后升、平稳后再下降的趋势,平均值达90%以上.出水ρ(NH4+-N)平均值为2.0 mg/L,其中,硝化作用和微生物同化作用使ρ(NH4+-N)平均下降13.9和5.2mg/L,分别占进水ρ(NH4+-N)的54%和20%;植物作用、基质永久吸附作用和挥发作用分别使ρ(NH4+-N)下降2.9、0.7和0.7mg/L,占进水ρ(NH4+-N)的12%、3%和3%.综上,MET对地下水中NH4+-N的去除率可达90%,实现了高效去除NH4+-N的目标.     

Impact of pre-oxidation on the formation of byproducts in algae-laden water disinfection: Insights from fluorescent and molecular weight

Pre-oxidation has been reported to be an effective way to remove algal cells in water, but the released algal organic matter (AOM) could be oxidized and lead to the increment in disinfection by-product (DBP) formation. The relationship between pre-oxidation and AOM-derived DBP formation needs to be approached more precisely. This study compared the impact of four pre-oxidants, ozone (O₃), chlorine dioxide (ClO₂), potassium permanganate (KMnO₄) and sodium hypochlorite (NaClO), on the formation of nitrogenous (N-) and carbonaceous (C-) DBPs in AOM chlorination. The characterization (fluorescent properties, molecular weight distribution and amino acids concentration) on AOM samples showed that the characterization properties variations after pre-oxidation were highly dependent on the oxidizing ability of oxidants. The disinfection experiments showed that O₃ increased DBP formation most significantly, which was consistent with the result of characterization properties variations. Then canonical correspondent analysis (CCA) and Pearson's correlation analysis were conducted based on the characterization data and DBP formation. CCA indicated that C-DBPs formation was highly dependent on fluorescent data. The formation of haloacetic acids (HAAs) had a positive correlation with aromatic protein-like component while trichloromethane (TCM) had a positive correlation with fulvic acid-like component. Pearson's correlation analysis showed that low molecular weight fractions were favorable to form N-DBPs. Therefore, characterization data could provide the advantages in the control of DBP formation, which further revealed that KMnO₄ and ClO₂ were better options for removing algal cells as well as limiting DBP formation.     

Cathode ray tube glass recycling: an example of clean technology.

In this study the use of 'cleaned' end of life (EOL) cathode ray tube (CRT) glass as a raw material in ceramic glazes is described. At present, the recycling and industrial utilization of CRT, a glass material from TV and computer sets, is a subject of intense research with particular regard to the so-called open-loop recycling, namely cycles different from that of the origin. However, the use of CRT glass as a secondary raw material is strictly related to the demand of high-quality raw material. The good preliminary results reached by introducing clean TV and PC monitor panel and cone glass into ceramic glaze formulations pushed research toward the setting-up of a base glaze that is exploitable for the production of pigmented, silk-screened and flame-hardened glazes (products used industrially for coating floor tiles). The aesthetic and chemical characterization of the tiles glazed by this product showed an extremely similar behaviour to originals that did not contain CRT glass. The good technical results achieved have been supported by the life cycle assessment analysis, which has demonstrated a reduction of the environmental impact of the CRT glass-containing ceramic glaze with respect to the standard one.     

An ethnobotanic garden

With the help of local schools and the Mount Subasio Park Community, the Assisi Nature Council has created a small ethnobotanic garden in the centre of the ancient city of Assisi, Italy. This short paper describes the opening of the garden and the philosophy which promoted its construction.     

Safety I–II,resilience and antifragility engineering: a debate explained through an accident occurring on a mobile elevating work platform

Occupational health and safety (OHS) represents an important field of exploration for the research community: in spite of the growth of technological innovations, the increasing complexity of systems involves critical issues in terms of degradation of the safety levels. In such a situation, new safety management approaches are now mandatory in order to face the safety implications of the current technological evolutions. Along these lines, performing risk-based analysis alone seems not to be enough anymore. The evaluation of robustness, antifragility and resilience of a socio-technical system is now indispensable in order to face unforeseen events. This article will briefly introduce the topics of Safety I and Safety II, resilience engineering and antifragility engineering, explaining correlations, overlapping aspects and synergies. Secondly, the article will discuss the applications of those paradigms to a real accident, highlighting how they can challenge, stimulate and inspire research for improving OHS conditions.