珍贵油料植物诸葛菜的研究

四川大学植物遗传研究室经过几年的调查研究,发现诸葛菜的农艺性状较好,分枝多、角果多,每果子粒多,千粒重较重,含油量较高,特别是油分品质优异,其营养价值高的脂肪酸如油酸和亚油酸的含量较高,分别为20.32％,和53.17％,其营养价值低的脂肪酸如亚麻酸和芥酸的含量较低,分别为4.76％和0.94％,是油菜优质育种的优异新种源,可以作为油菜远缘杂交育种亲本,并可能选育出优质油料新作物。本文对诸葛菜的开花授粉习性作了观察,对核型特点作了分析,可供育种工作的参考,诸葛菜主产中国。四川大学在国内外首先推荐这种有希望的油料新种源。     

组氨酸-Co(Ⅱ)光度法测定水中溶解氧的研究

以氧载体作显色体系,提出了组氨酸－Ｃｏ（Ⅱ）光度法测定水中溶解氧的方法;并用从实验中得到的（Ｃｏ）－（Ｏ２）关系,尝试用Ｃｏ标准溶液代替Ｏ２标准,解决了Ｏ２标准的难题。该方法简单、快速、取样量少、准确度高。ＤＯ的测定范围为０．１￣２０ｍｇ／Ｌ。     

考虑偏应力比影响的主应力轴旋转下重塑黄土变形研究

采用浙江大学空心圆柱扭剪仪对重塑黄土试样进行了3种复杂应力路径下的试验,研究了主应力轴旋转条件下偏应力比η对重塑黄土变形特性的影响。试验结果表明,不同偏应力比下重塑黄土的强度差异较大,η=0.133时归一化强度最小,而η=0.433时强度最大,偏应力比η从0.133到0.5时归一化强度呈现增大—减小—增大—减小的规律。主应力轴旋转对重塑黄土的各应变增量均有影响,并且对中间主应变增量的影响最大,其中大主应变和小主应变在ε-q平面内对称开展,且总体表现出Δεz0,Δεθ0的趋势,中间主应变整体呈现Δεr0的发展趋势,当应力主轴旋转目标角度α45°时,中间主应变呈现出不同的开展形式,重塑黄土在应力主轴旋转下向异性较为显著。     

鲤鱼对2,6-二硝基甲苯的生物浓缩、消除与代谢研究

 以鲤鱼为实验生物，应用流动式摄取及释放装置，进行了2，6－二硝基甲苯（2，6－DNT）的生物浓缩与释放研究。取得了2，6－DNT在鲤鱼（全鱼）、肝及肠部的生物浓缩曲线。全鱼的浓缩曲线可以稳态（平台式）曲线描述，但是肝、肠部浓缩曲线均呈峰形。肝部峰快速下降后渐趋稳态，肠部峰下降未得稳态。峰形，肝在先，肠在后。对比2，6－DNT在全鱼及肝、肠的生物浓缩曲线，并参照报道_（1，2）指出，全鱼摄取曲线上各点所表现的浓度值为各时刻鱼体内各组织摄取化学品总重对全鱼重量的比值。肝、肠部峰形曲线预示了在肝、肠内生物浓缩过程发生了生物转化作用。对全鱼的生物浓缩过程应用单区一级动力学模型，求得BCF值与消除速率常数K₁与K₂，由K₁/K₂计算得到的BCF值与实测值相符。释放较慢，释放曲线呈双曲线形，半减期为4.8h。     

天然膨润土还原吸附Cr（Ⅵ）

以天然膨润土为吸附剂,还原吸附处理含Cr（Ⅵ）模拟废水。实验结果表明：以（NH₄）₂FeSO₄为还原剂吸附效果最佳;在还原剂加入量为理论值的0.8倍、膨润土加入量为6 g/L、吸附时间为30 min、吸附温度为30 ℃、初始Cr（Ⅵ）质量浓度为1 mg/L的条件下,Cr（Ⅵ）去除率可达99.6%,处理后模拟废水中总铬质量浓度低至0.003 mg/L。天然膨润土对Cr（Ⅵ）的还原吸附符合准二级动力学模型及Freundlich等温吸附模型。     

不同日摄氟量居民罹患氟斑釉的研究

人和动物体内的硬组织（牙齿、骨骼等）是氟化物作用的主要部位,严重者可引起氟骨症和氟斑釉,其中氟斑釉是慢性氟中毒的一项特异指标。通常日摄氟量高的居民其氟斑釉率和斑釉指标均增高。本文用日摄氟量作指标评价环境氟对居民牙齿的影响。研究结果揭示,当地居民的斑釉率和斑釉指数均与日摄氟量呈非常显著的正相关,r＝0.9084,P<0.01。     

Two-step harmless treatment of secondary aluminum dross (SAD) by vacuum distillation and alkaline roasting

Journal of Material Cycles and Waste Management - Secondary aluminum dross (SAD) is classified as hazardous waste by many countries in the world because it contains a large number of toxic and...     

N2O profiles in the enhanced CANON process via long-term N2H4 addition: minimized N2O production and the influence of exogenous N2H4 on N2O sources

Environmental Science and Pollution Research - Production of the greenhouse gas nitrous oxide (N2O) from the completely autotrophic nitrogen removal over nitrite (CANON) process is of growing...     

Assessment on the effectiveness of environmental regulation in China—evidence from a panel data analysis

Environmental Science and Pollution Research - In the context of global warming and environmental deterioration, the environment impact assessment is a crucial institutional guaranty to assure less...     

The key elements analysis of Guangdong & Shenzhen ETS & tips for China national ETS construction

The only joint effort area of provincial and municipal governments resides in Guangdong Province and Shenzhen City in China’s carbon emission trading system (ETS) pilots, which characterize the national carbon ETS plots. The present study on the operating experience from this area has important reference value for the national carbon ETS. Analysis and comparison of the key elements show many differences in coverage, total allowance, allowance allocation, and MRV mechanism between Guangdong and Shenzhen carbon ETS. The present study provides the following explanation: (1) the design characteristics of carbon ETS (e.g. coverage, total quotas, the allocation, and MRV mechanism) depend on the local geographical conditions and policy goals. The differences of economic structure in Guangdong Province and Shenzhen City result in different coverage, which then result in differences in other management elements. (2) The operating state of the carbon market is affected by overall design of carbon ETS: in the case of tighter total allowance, lower proportion of China Certified Emission Reductions, and harsher punishment, the carbon market is relatively active, which intends to produce carbon financial market. Based on deep analysis of operation characteristics of carbon ETS in Guangdong and Shenzhen, the present study suggests that (1) the allowance should be allocated freely at the beginning stage and then gradually transited to the voluntary paid auction; (2) the allowances assigned to companies shall be linked up with their energy-saving objectives; (3) the output fluctuations and economic influence on the allowance allocation should be properly handled to maintain the fairness and consistence of allowance allocation standards; (4) stable public expectation is one of the key elements to maintain the regular operation of carbon ETS; (5) constrained carbon emission behavior outside ETS can contribute to social justice; and (6) the improvement of professional skills of relevant personnel in the enterprise and independent third party can enhance carbon emissions data reliability.