Distribution of Alkalinity, Ph, Salinity and Carbon Dioxide Components in the Coastal Waters of Alexandria

The ara studied is located between El-Dikheila Harbour in Elmex Bay and Mandara, at longitude 29° 47' and 30° East and latitude 31° 17' North. the aim of the work is to look at carbon dioxide components in this areA and the effect of waste water discharged on their concentrations. Surface and bottom water samples were collected from 12 stations during January, April, August and November, 1995. Total alkalinity, salinity, temperature and pH were measured. Carbonate alkalinity, total alkalinity, partial pressure and dissolved carbon dioxide, carbonate and bicarbonate ions were calculated, since the studied area includes two differetn sources of pollution. It wAs found conventient to refer El-Mex Bay as region “A” which contains stations from I to VI and the area located between Kayet Bey outfall and Mandara which contains stations from VII to XII as region “B”. When specific alkalinity is used As A tracer for El-Umum drain water it is observed that the drain water could reach Sidi Bishr area especially in August and November, while in January and April drain water did not reach this area.     

Binding of aluminum to human serum transferrin,human serum albumin and rat serum proteins

Abstract

Human serum transferrin (HSTF), human serum albumin (HSA) and rat serum were compared for their interaction with AlCl₃ , in a Tris‐HCl buffer solutions (pH 7.4). The AlCl₃ was tested in series of concentrations in the range of 50 μM up to 500 μM . HSTF, HSA and their 1:1 mixture and rat serum were incubated at 37°C with series of AlCl₃ concentrations. The protein profile of the incubated solutions were compared to control using SDS‐PAGE and FPLC tests. The results indicated that HSTF was more specifically responsive to AlCl₃showing a characteristic increase in its UV absorption, peak and area dimensions. Simultaneously, HSA was less affected, but it showed a significant shift with an increase in molecular weight accompanied with a change in its profile. The respective bands of transferrin and albumin in rat serum behaved similarly. The SDS‐PAGE and FPLC data coincided and confirmed the preferential affinity of HSTF to bind with Al³⁺ . These results support the suggestion of using HSTF for monitoring levels of Al³⁺ in human blood samples of exposed population. The importance of further developing such a biomarker is the increased demand for early detection of the hazardous levels of Al³⁺ in relation to its long term neurotoxic adverse effects.     

Optimal planning for the sustainable utilization of municipal solid waste

The increasing generation of municipal solid waste (MSW) is a major problem particularly for large urban areas with insufficient landfill capacities and inefficient waste management systems. Several options associated to the supply chain for implementing a MSW management system are available, however to determine the optimal solution several technical, economic, environmental and social aspects must be considered. Therefore, this paper proposes a mathematical programming model for the optimal planning of the supply chain associated to the MSW management system to maximize the economic benefit while accounting for technical and environmental issues. The optimization model simultaneously selects the processing technologies and their location, the distribution of wastes from cities as well as the distribution of products to markets. The problem was formulated as a multi-objective mixed-integer linear programing problem to maximize the profit of the supply chain and the amount of recycled wastes, where the results are showed through Pareto curves that tradeoff economic and environmental aspects. The proposed approach is applied to a case study for the west-central part of Mexico to consider the integration of MSW from several cities to yield useful products. The results show that an integrated utilization of MSW can provide economic, environmental and social benefits.     

The Relationship Between Iodine, Chlorinity, Ph, Reactive Phosphate, Nitrite and Organic Matter in the Coastal Water of Alexandria

Water samples were taken from 12 stations at El-Dikheila Harbour, El-Mex Bay, Western Harbour, Qayet Bey outfall, Eastern Harbour, El-Ibrahemiya, Gleem, Sidi Bishr and Mandara, during January, April, August and November 1995. the area lies between latitude 31˚ 8' and 31˚ 17' North and longitude 29˚ 47' and 30˚ East. the annual mean of chlorinity (11.69-20.5%₀), pH (7.9-8.3), reactive phosphate (0.31-2.24 μM), nitrite (0.18-1.98 μM), oxidizable organic matter (1.97-8.95 mgO₂ 1^-1), iodide (21.14-46.74 μg 1^-1) and iodate (4.61-2.04 μg 1^-1) were measured. Iodide content in water is three times higher than iodate. Iodide is positively correlated with chlorinity (r=0.65) and iodate (r=0.45), while it is negatively correlated with nitrite (r= -0.72), oxidizable organic matter (r= -0.55) and pH (r= -0.4).     

Risk-based maintenance (RBM): a quantitative approach for maintenance/inspection scheduling and planning

The overall objective of the maintenance process is to increase the profitability of the operation and optimize the total life cycle cost without compromising safety or environmental issues. Risk assessment integrates reliability with safety and environmental issues and therefore can be used as a decision tool for preventive maintenance planning. Maintenance planning based on risk analysis minimizes the probability of system failure and its consequences (related to safety, economic, and environment). It helps management in making correct decisions concerning investment in maintenance or related field. This will, in turn, result in better asset and capital utilization.

This paper presents a new methodology for risk-based maintenance. The proposed methodology is comprehensive and quantitative. It comprises three main modules: risk estimation module, risk evaluation module, and maintenance planning module. Details of the three modules are given. A case study, which exemplifies the use of methodology to a heating, ventilation and air-conditioning (HVAC) system, is also discussed.     

Safety assessment of potential supercritical solvents for Fischer–Tropsch Synthesis

Fischer–Tropsch Synthesis (FTS) is a primary pathway for gas-to-liquid (GTL) technology. In order to overcome commercial problems associated with reaction and transport phenomena, the use of supercritical solvents has been proposed to enhance conversion, catalyst stability and improve temperature control in fixed-bed reactors. One of the major challenges in designing the supercritical FTS reactor unit is selecting appropriate solvents of critical properties within the required reaction operating conditions. Numerous alternatives exist and should be screened based on relevant criteria. The main aim of this paper is to develop a screening methodology to identify an optimum supercritical solvent or a mixture of solvents that meet the aforementioned criteria while minimizing the cost and more importantly satisfying the safety constraints. A safety metric system was developed in order to compare the risk issues associated with using different solvents. In addition, an economic analysis of using the different solvents was performed. Finally, a case study was solved to illustrate the use of the proposed metrics and the selection of solvents based on safety and techno-economic criteria.     

Plants that accumulate metals (Part VI): Further studies of an Australian nickel accumulating plant

Analyses for nickel, copper, cobalt and zinc of some leaf, stem and root samples ofHybanthus floribundus from the Eastern Goldfields area of Western Australia is reported. All four metals appear to behave differently. Nickel is taken into the roots, but accumulates in the tops. Copper is largely excluded, but is evenly distributed at low levels. Cobalt is taken up to a greater extent than copper and is evenly distributed. Zinc is accumulated in the roots and is largely excluded from the tops. Plant-soil metal concentrations are discussed. Extraction studies show that nickel in the leaves, and to a lesser extent in woody parts, is associated with pectic carbohydrates. Accumulation and selectivity of uptake are discussed.     

Geochemical speciation of trace metals in sediments of the northern Nile Delta Lake by sequential extraction technique

ABSTRACT

The present study was performed to investigate surface sediment samples from Lake Edku of the Nile Delta Lagoons, Egypt. The Lake is important for fishing in the region. The importance of research is to understand the mobility and bioavailability of each studied metal. The study was carried out on 10 sampling sites during 2017. The sediments were subjected to the technique of sequential extraction to examine the chemical forms of some trace metals (Fe, Mn, Zn, Cu, Pb and Ni). Five stage extractions were done as the following order: soluble and exchangeable, carbonate, iron and manganese oxides, organic matter fraction and residual fraction. Attained results from the five fractions showed variations in the concentrations of metal contents of different sites under study. The overall metal concentrations (%) in the initial four extractable fractions (exchangeable, carbonate, oxides and organic matter fractions) were assessed to configure the mobility of each studied metal. The risk assessment code (RAC) represents the summation of exchangeable and carbonate fractions, it was between low and medium risk for aquatic environment. The range percentage of RAC for the metals was in the following order: 1.8–13, 4–23.5, 15–26, 5.7–19.5, 9–25 and 4.8–18.2 for Fe, Mn, Zn, Cu, Pb and Ni, respectively. Approximately 30% of the total copper was associated to the organic fraction, which may represent a high mobility of copper in these sediments. The highest mobility of metals in the sediments could be confirmed by its bioavailability factor (BF), which was within the ranges of 0.32–0.61, 0.36–0.59, 0.64–0.83, 0.36–0.72, 0.37–0.62 and 0.52–0.78 for Fe, Mn, Zn, Cu, Pb and Ni, respectively. The BF exhibited the following order: Zn > Ni > Cu > Pb ≈ Mn?>?Fe. The high levels of BF for the studied metals may represent the potentiality for toxic metals to be easily released into the aquatic environment.     

Evaluation and assessment of environmental protection alternatives for the Jeddah cement company plant

An environmental impact assessment is conducted by utilizing monitoring, meteorological, and physical modeling data. This information serves as input to a decision analysis of the environmental protection alternatives for the cement plant in Jeddah, Saudi Arabia. Utility theory provides the methodology underlying the Evaluation and Sensivity Analysis Program (ESAP) with which the alternatives are evaluated. Recommendation include: (1) installation of electrostatic precipitators of at least 99% efficiency, (2) institution of a 1.6 km nonresidential zone given the present 60 m chimneys, and (3) substitution of low sulphur fuel for the crude oil now consumed. By illustration this study suggests the general relevance of the ESAP program to environmental assessment and management.     

ZrxMg1-xO supported cobalt catalysts for methane decomposition into COx-free hydrogen and carbon nanotubes

Zirconia-magnesia supported cobalt catalysts with various Zr/Mg atomic ratios were prepared and evaluated for non-oxidative catalytic decomposition of methane to produce CO_x-free hydrogen and carbon nanotube. The catalytic performance of the catalysts was performed in a continuous fixed bed flow reactor at 700°C under atmospheric pressure. The fresh and spent catalysts were characterized by XRD, TPR, BET, TEM, and Raman spectroscopy. The results showed that the change in Zr/Mg ratio of the mixed oxide support has a significant effect on the catalytic performance of the active Co metal. The catalyst 30%Co/Zr_0.8Mg_0.2 showed the highest activity and stability within the used series of catalysts with hydrogen yield reached up to 79%. Both Co/Mg_1.0 and Co/Zr_1.0 showed poor stability due to strong Co-Mg interaction and aggregation of Co species on Zr support, respectively. All catalysts produced mainly MWCNTs with different diameters depending on the Zr/Mg ratio. The outer diameter increased with increasing Zr content in the catalyst due to the enlargement of the particle size of cobalt as a result of aggregation.