Preparation and Characterization of Polyaniline and Ag/ Polyaniline Composite Nanoporous Particles and Their Antimicrobial Activities

Polyaniline (PANI) and Ag/PANI nanoporous composite were prepared by an oxidative polymerization method. The oxidation process of PANI nanoparticles was occurred using (NH₄)₂S₂O₈ while the oxidation process of Ag/PANI nanoporous composite was occurred using AgNO₃ under the effect of artificial radiation. The structural, morphological, and optical properties of the PANI and Ag/PANI nanoporous structures were studied using different characterization tools. The results confirm the formation of polycrystalline nanoporous PANI and spherical nanoporous composite of Ag/PANI particles. Antibacterial activity tests against gram-positive bacteria, Bacillus subtilis and Staphylococcus aureus, and gram-negative bacteria, Escherichia coli, and Salmonella species were carried out using different concentrations of PANI nanoparticles and Ag/PANI nanoporous composites. PANI has not antibacterial effect against all studied pathogens. In contrast, Ag/PANI nanoporous composites possessed antibacterial activity that is identified by the zone of inhibition. The inhibition zones of bacteria are in order; Salmonella species?>?S. aureus?>?B. subtilis?>?E. coli. The inhibition zones of all bacteria increased with increasing concentrations of Ag/PANI nanoporous composites from 200 to 400 ppm then decreased with further increasing of the dose concentrations to 600 ppm. Finally, a simplified mechanism based on the electrostatic attraction is presented to describe the antimicrobial activity of Ag/PANI nanoporous composite.     

Toward sustainable adaptation to future climate change: insights from vulnerability and resilience approaches analyzing agrarian system of Iran

There is no certainty that adaptation to climate change is sustainable, and new approaches to assess current climate change adaptation trajectories are sorely needed. In this paper, we review the farmer-focused approaches (typical of vulnerability approaches) and agro-ecosystem-focused approaches (typical of resilience approaches). We propose that a combination of the two may be a better way to conceptualize sustainable adaptation to future climate change within an agro-ecological system. To test our hypothesis, we use the case study of Iran, a land that has shown both tremendous resilience and vulnerability in its agro-ecological system. We explore the changes that have occurred in the Iranian farming system and their implications for farmers’ resilience to climate change through an integrated lens combining vulnerability approaches and resilience approaches. During the previous five decades, we describe how Iranian peasants have become small farmers, the land tenure system has changed from a traditional landlord-sharecropping system to family farms, and the quantity and quality of the agro-ecological resources have changed considerably. Our integrative approach provides important insights for both research and policy. We show that combining the two approaches can have far-reaching implications for farmers’ adaptation to future climate change knowledge, policy, and practice since one approach aims to decrease farmers vulnerability and the other approach aims to build resilient agro-ecosystems.     

Develop dynamic model for predicting traffic CO emissions in urban areas

The greater the use of energy in the transportation sectors, the higher the emission of carbon monoxide (CO), and hence inevitable harm to environment and human health. In this concern, measuring and predicting of CO emission from transportation sector—especially large cities—is important as it constitute 90 % of all CO emission. Many urban cities in developing world have not properly experienced such measurements or predictions. In this paper, for the first time, field measurements of traffic characteristics data and corresponding CO concentration have been performed for developing a model for predicting CO emissions from transportation sector for New Borg El Arab (NBC), Egypt. The performance of Swiss-German Handbook Emission Factors for Road Transport (HBEFA v3.1) model has been assessed for predicting the CO concentration at roadside in the study area. Results indicated that HBEFA v3.1 underestimate emission figures. The developed CO dynamic emission model involves the traffic flow characteristics with roadside CO concentrations. Acceptable representation of measured CO concentration has been shown by the developed dynamic CO emission model which introduces R ²?=?0.77, mean biases and frictional biases of ?0.27 mg m^?3 and 0.09, respectively. A comparison between predicted CO concentrations using HBEFA v3.1 and the promoted dynamic model indicate that HBEFA v3.1 estimates CO emission concentrations in the study area with a mean error and frictional biases 159.26 and 233.33 %, respectively, higher than those of the developed model.     

Biomonitoring marine habitats in reference to antibiotic resistant bacteria and ampicillin resistance determinants from oviductal fluid of the nesting green sea turtle, Chelonia mydas

During the egg-laying process, oviductal fluid was collected using a non-invasive procedure from the cloacal vent of the green turtles. Forty-two independent isolates of antibiotic-resistant bacteria from 11 genera were obtained from 20 turtles during nesting. The dominant isolate was Citrobacter (52.4%), followed by Pseudomonas, Proteus, Enterobacter, Salmonella, Escherichia coli, Shigella, Edwardsiella, Morganella, Providencia and Arcomobacter. Most of the isolates were resistant to ampicillin. Ampicillin-resistant isolates showed variations in their resistance for the following classes of β-lactamases: extended-spectrum β-lactamases (EBSLs), AmpC type β-lactamases C (AmpC), and screen-positive β-lactamase. None of the isolates produced metallo β-lactamase. Some ampicillin-resistant genes were detected by multiplex polymerase chain reaction (PCR) only. Inhibitor based test (IBT) categorized some isolates as AmpC β-lactamase producers. β-Lactamase genes were detected from a few strains. The sequencing of those genes revealed the presence of cephamycinase (CMY) and AmpC β-lactamases. The oviductal fluid was used in this study as a source of bacterial antibiotic-resistant determinants for biomonitoring marine turtles exposed to contaminated effluents. This data can be of value in understanding the decline of this endangered species as a result of exposure to marine pollution which is threatening their survival.     

Organochlorine pesticide and polychlorinated biphenyl residues in feathers of birds from different trophic levels of South-West Iran

Persistent organochlorine pesticides (OCPs), such as dichlorodiphenyltrichloroethane (DDT) and its metabolites, hexachlorobenzene (HCB), alpha, beta and gamma-hexachlorocyclohexane (HCH) isomers, together with polychlorinated biphenyl (PCB) congeners (IUPAC Nos. 28, 52, 101, 138, 153 and 180), were determined in tail feathers from 37 birds belonging to 18 species, all originating from the South-West of Iran (Khuzestan, coast of the Persian Gulf). This is the first report on organochlorine contaminants in feathers from museum collections and it is an indication of the concentrations of OCPs and PCBs in the past (1991-1996). Median concentrations of HCHs, DDTs, PCBs and HCB were 22, 14, 11 and 10 ng/g feather, respectively. Significant correlations (p<0.05) were calculated between OCPs (except HCB) and PCBs in the bird feathers. p,p'-DDE and gamma-HCH were the most abundant OCPs, while CB 180, CB 138 and CB 101 were the predominant PCB congeners in almost all species. Significant differences (p<0.05) in the mean concentrations of DDTs and PCBs were detected among species grouped according to their feeding habits. Levels of DDTs and PCBs were highest in the carnivorous species and lowest in the herbivorous species. Levels of OCPs and PCBs in feathers of bids in the 1990s were generally below the thresholds reported to affect reproduction.     

Application of an empirical transport model to simulate retention of nanocrystalline titanium dioxide in sand columns

Nanocrystalline titanium dioxide was injected into sand columns to simulate subsurface injection for creation of a permeable treatment barrier. Past usage of this material as an ex situ pilot scale treatment filter has shown that it has a high adsorption capacity for a number of heavy metals and therefore would be a good candidate for injection technology. Three suspension concentrations (50, 75 and 100 mg l(-1)) were pumped through packed sand columns at different flow velocities (3.0, 6.8 and 14.1 cm min(-1)). Little to no particles was detected in the effluent. Most of the nanoparticles remained in the sand columns, with an increasing then decreasing retained solids pattern. Application of a one-dimensional advection-dispersion flow model, that included two empirical kinetic terms to account for particle retention in the porous media, produced data fits that followed the general trend of the data, but did not truly capture the concentration maxima in the data sets. Discussion of these results highlights the limited ability of existing models to aid in predicting particle retention of non-ideal materials for engineering purposes.     

Natural organic compounds as alternative to methyl bromide for nematodes control

Thirty-three organic acids and furfural metabolites were examined for their nematicidal activity against plant-parasitic, free-living and predacious nematodes. Propionic acid, 2-methylhexanoic acid, lactic acid, maleic acid, and furic acid were the most effective nematicides among normal chain organic acids, branched organic acids, hydroxy/keto-acids, dicarboxylic acids and furfural metabolites, respectively. Seven of the tested compounds were found to have more than 90% mortality thus designating them as highly active nematicides. Of the highly active tested compounds, an average octanol/water log P of 0.97 was observed with a range from 0.28 to 2.64, and a Henry's Law constant averaging 2.6 x 10(- 7) atm.m3/mole. Tested chemicals with minor or low nematicidal activity showed an average log P of 1.76 with a range from 0.15 to 3.42 and a Henry's Law constant averaging 16.6 x 10(- 7) atm.m3/mole.     

Effects of chitosan on oxidative stress and metallothioneins in aquatic worm Tubifex tubifex (Oligochaeta, Tubificidae)

Chitosan is a natural polymer which has the property to elicit the natural defenses mechanism in plant and which can be an interesting biopesticides. It is then necessary to investigate the potential toxicity of chitosan for aquatic animal health. Metallothioneins (MTs) are low molecular weight proteins, mainly implicated in metal ion detoxification. Increase in MTs contents had been considered as a specific biomarker of metal exposure. However recently it has been demonstrated that MTs participate in several cellular functions such as regulation of growth and anti-oxidative defenses. Therefore, the induction of MTs has been investigated in the aquatic worms Tubifex tubifex exposed to chitosan. MTs levels in exposed worm increased significantly (p > 0.05) after 2, 4, and 7 days of exposure to different concentrations of chitosan (maximum + 158.19 +/- 10.2% after 2 days of exposure to 125 mgl(-1) of chitosan). Several antioxidant parameters including glutathione (GSH), glutathione-S-transferase (GST), glutathione reductase (GR), and catalase (CAT) were quantified in T. tubifex after 2, 4, and 7 days of exposure to chitosan. Exposure to chitosan had a negative effect on T. tubifex growth (maximum effect -6.11 +/- 1.6% after 7 days with 125 mgl(-1)) demonstrating the toxic effect of the pesticide. This growth rate decrease was accompanied by a reduction in protein contents. The activity of catalase (CAT), glutathione-S-transferase (GST), and glutathione reductase (GR) increased in response to the chitosan demonstrating an oxidative stress in the worms.     

2-Nitroso-1-naphthol as a selective reagent for preconcentration of cobalt by vortex assisted combined with solidification of organic droplet and its determination by flame atomic absorption spectrometry

Highly rapid and selective vortex-assisted liquid–liquid microextraction based on solidification of organic drop has been used for determination of cobalt ion. 2-Nitroso-1-naphthol (2N1N) was used as a selective complexing agent to form stable cobalt–2N1N complex which can be extracted with 1-undecanol at a short time by the assistance of vortex agitator system followed by its determination using flame atomic absorption spectrometry. In vortex assisted, vigorous vortex stream as well as the vibrant effect of vortex system cause very fine droplets of extraction solvent to be produced and extraction occurred at a short time. Some parameters influencing the extraction process such as pH of samples, concentration of 2-nitroso-1-naphthol, extraction solvent volume, extraction time, ionic strength and surfactant addition, as well as interferences were evaluated in detail and optimum conditions were selected. At the optimum conditions, the calibration curve was linear in the range of 15 to 400 μg L^?1 of cobalt ions. The relative standard deviation based on ten replicate analysis of sample solution containing 50 μg L^?1 of cobalt was 3.4 %. The detection limit (calculated as the concentration equivalent to three times of the standard deviation of the blank divided by the slope of the calibration curve after preconcentration) was 5.4 μg L^?1. The accuracy of the proposed method was successfully evaluated by the analysis of certified reference materials. This selective and highly rapid method was used for determination of cobalt ions in different water samples.     

Environmental and socio-economic impacts of pipe drainage in Pakistan

Many drainage schemes and salinity control projects have been executed world wide. Pipe drainage has widely been used in Pakistan, Egypt and India to control waterlogging. The impact of pipe drainage on land and water was evaluated in this paper using data of three pipe drainage projects in Pakistan namely Khushab Salinity Control and Reclamation Project, Fourth Drainage Project in Faisalabad and Swabi Salinity Control and Reclamation Project. Data by regular monitoring of these projects were collected. The effect of pipe drainage on water table depth at these three locations has been compared. Water quality and soil salinity improvement due to the pipe drainage has also been investigated. Data, related to water table depths and discharges from drain pipes/wells, was collected. Observation wells, installed at various places by the Water and Power Development Authority, were used for collection of this data. To evaluate the impact of the projects on salinity, soil samples from all the three locations were tested. A questionnaire was prepared to get the view of the people about the projects. It was revealed that in these areas, due to subsurface pipe drainage, the percentage of the abandoned land has been considerably decreased. Over drainage was observed in a few places of the projects. The farmers at such places were asked to change their cropping patterns. Ultimately, there has been an increase in area under cultivation, crop yields and cropping intensity in the projects’ area.