Photocatalytic degradation of crystal violet dye under sunlight by chitosan-encapsulated ternary metal selenide microspheres

Environmental Science and Pollution Research - Organic dyes that are extensively released in wastewater from various industries remain the priority concern in the modern world. Therefore, a novel...     

Spatial and temporal characterization of trace elements and nutrients in the Rawal Lake Reservoir,Pakistan using multivariate analysis techniques

Rawal Lake Reservoir is renowned for its ecological significance and is the sole source of drinking water of the third largest city of Pakistan. However, fish kill in recent years and anthropogenic impacts from human-related activities in its catchment area have resulted in deterioration of its surface water quality. This study aims to characterize spatial and temporal variations in surface water quality, identify contaminant sources, and compare their levels with quality guidelines. Surface water samples were collected from 10 sites and analyzed for 27 physicochemical parameters for a period of 2 years on a seasonal basis. Concentration of metals in surface water in pre-monsoon were in the order: Fe > Mg > Ca > Mn > Zn > Ni > Cr > Cu > Co > Pb, whereas in post-monsoon, the order of elemental concentrations was: Ca > Mg > Na > Fe > K > Zn > Cr > Li > Pb > Co > Ni > Cu > Mn > Cd. Metals (Ni, Fe, Zn, and Ca), pH, electrical conductivity (EC), dissolved oxygen (DO), chemical oxygen demand (COD), and nutrients (PO₄³⁻, NO₃–N, and SO₄²⁻) were measured higher in pre-monsoon, whereas concentration of Cu, Mn, Cr, Co, Pb, Cd, K, Na, Mg, Li, Cl⁻, and NH₄–N were recorded higher in post-monsoon. Results highlighted serious metal pollution of surface water. Mean concentration of Zn, Cd, Ni, Cu, Fe, Cr, and Pb in both seasons and Mn in post-monsoon were well above the permissible level of surface water quality criteria. Results stress the dire need to reduce heavy-metal input into the lake basin and suggest that heavy-metal contamination should be considered as an integral part of future planning and management strategies for restoration of water quality of the lake reservoir.     

Incidence of metal and antibiotic resistance in Pseudomonas spp. from the river water, agricultural soil irrigated with wastewater and groundwater

A total of 144 isolates of Pseudomonas spp. (48 each from the Yamuna River water, wastewater irrigated soil and groundwater irrigated soil) were tested for their resistance against certain heavy metals and antibiotics. Minimum inhibitory concentrations (MICs) of Hg^2?+?, Cd^2?+?, Cu^2?+?, Zn^2?+?, Ni^2?+?, Pb^2?+?, Cr^3?+? and Cr^6?+? for each isolate were also determined. A maximum MIC of 200 ??g/ml for mercury and 3,200 ??g/ml for other metals were observed. The incidences of metal resistance and MICs of metals for Pseudomonas isolates from the Yamuna water and wastewater irrigated soil were significantly different to those of groundwater irrigated soil. A high level of resistance against tetracycline and polymyxin B (81.2%) was observed in river water isolates. However, 87.5% of Pseudomonas isolates from soil irrigated with wastewater showed resistance to sulphadiazine, whereas 79.1% were resistant to both ampicillin and erythromycin. Isolates from soil irrigated with groundwater exhibited less resistance towards heavy metals and antibiotics as compared to those of river water and wastewater irrigated soil. Majority of the Pseudomonas isolates from water and soil exhibited resistance to multiple metals and antibiotics. Resistance was transferable to recipient Escherichia coli AB2200 strains by conjugation. Plasmids were cured with the curing agent ethidium bromide and acridine orange at sub-MIC concentration.     

The use of molecular techniques to characterize the microbial communities in contaminated soil and water

Traditionally, the identification and characterization of microbial communities in contaminated soil and water has previously been limited to those microorganisms that are culturable. The application of molecular techniques to study microbial populations at contaminated sites without the need for culturing has led to the discovery of unique and previously unrecognized microorganisms as well as complex microbial diversity in contaminated soil and water which shows an exciting opportunity for bioremediation strategies. Nucleic acid extraction from contaminated sites and their subsequent amplification by polymerase chain reaction (PCR) has proved extremely useful in assessing the changes in microbial community structure by several microbial community profiling techniques. This review examines the current application of molecular techniques for the characterization of microbial communities in contaminated soil and water. Techniques that identify and quantify microbial population and catabolic genes involved in biodegradation are examined. In addition, methods that directly link microbial phylogeny to its ecological function at contaminated sites as well as high throughput methods for complex microbial community studies are discussed.     

Assessment of phenol-degrading ability of Acinetobacter sp. B9 for its application in bioremediation of phenol-contaminated industrial effluents

Successful bioremediation of a phenol-contaminated environment requires application of those microbial strains that have acquired phenol tolerance and phenol-degrading abilities. A newly isolated strain B9 of Acinetobacter sp. was adapted to a high phenol concentration by growing sequentially from low- to high-strength phenol. The acclimatised strain was able to grow and completely degrade up to 14?mM of phenol in 136?h. The degradation rates were found to increase with an increase in the phenol concentration from 2.0 to 7.5?mM. The strain preferred neutral to alkaline pH range for growth and phenol degradation, with the optimum being pH 8.0. The optimum temperature for phenol degradation was found to be in the range of 30–35°C. Transmission electron micrographs showed a disorganised and convoluted cell membrane in the case of phenol-stressed cells, showing a major effect of phenol on the membrane. Enzymatic and gas chromatography-mass spectrometry studies show the presence of an ortho-cleavage pathway for phenol degradation. Efficient phenol degradation was observed even in the presence of pyridine and heavy metals as co-toxicants showing the potential of strain in bioremediation of industrial wastes. Application of strain B9 to real tannery wastewater showed 100% removal of initial 0.5?mM phenol within 48?h of treatment.     

DNA fragmentation,apoptosis and cell cycle arrest induced by sodium arsenite in cultured murine Sertoli cells: prevention by curcumin

Arsenic is a significant environmental concern worldwide, primarily due to geo physiochemical contamination of drinking water, and a major public health hazard in both developing and developed countries. The present study was aimed to investigate ameliorative effects of curcumin (Cur) against sodium arsenite (SA)-induced toxicity in cultured murine Sertoli cells. The cells were treated with SA (5 μM) and Cur (5 μg/ml and 10 μg/ml) alone or in combination for 12 hr. The SA treatment decreased cell viability, produced oxidative stress, and induced apoptosis as reflected by reactive oxygen species (ROS) generation, loss of mitochondrial transmembrane potential, DNA fragmentation, and apoptotic cells. Moreover, the SA-induced cell cycle arrest in the cells is characterized by a rise in the number of cells in the sub G1 phase of the cell cycle. The Cur was found to be effective in reversing all these arsenic (As)-induced cellular events. Data suggest that Cur modulates As-mediated oxidative stress, apoptosis, DNA fragmentation, and cell cycle arrest through suppression of excessive ROS generation. Evidence indicates that Cur may emerge as a useful protective agent against As-induced Sertoli cells toxicity by inhibiting As-induced damage in testes.     

Heavy metal concentration in water,sediment, and tissues of fish species (Heteropneustis fossilis and Puntius ticto) from Kali River,India

The river Kali has been one of the major recipients of industrial effluents in the Muzaffarnagar district of western Uttar Pradesh. The present studies revealed the occurrence and bioaccumulation of heavy metals (Cd, Cr, Pb, Zn, Mn) in riverine water, sediment, and muscles of two fish species, Heteropneustis fossilis and Puntius ticto. Data showed that the order of occurrence of heavy metals was Pb > Zn > Mn > Cr > Cd in river water, Mn > Zn > Pb > Cr > Cd in sediment, Zn > Mn > Cr > Cd > Pb in Puntius ticto and Cr > Zn > Mn > Cd > Pb in Heteropneustis fossilis. Results indicate that the concentrations of Cd, Pb, and Zn in river water, Pb, Zn, and Mn in sediment, Cd, Cr, Pb, and Zn concentration in muscles of Puntius ticto and Cr, Pb, and Zn concentration in in muscles of Heteropneustis fossilis are higher than the permissible standard limits. The presence of heavy metals contributed to toxicity in different organs of fish in River Kali. The bioaccumulation of heavy metals in different biotic organisms in river ecosystem may have adverse consequences on humans and livestock.     

Influence of hydrological runoff and catchment characteristics on accumulation floatable litter load in gross pollutant trap (GPT)

Journal of Material Cycles and Waste Management - The accumulation of floatable litter load captured in gross pollutant trap (GPT) due to the hydrological runoff has become challenging due to rapid...     

Evaluating levels and health risk of heavy metals in exposed workers from surgical instrument manufacturing industries of Sialkot,Pakistan

The study aimed to monitor heavy metal (chromium, Cr; cadmium, Cd; nickel, Ni; copper, Cu; lead, Pb; iron, Fe; manganese, Mn; and zinc, Zn) footprints in biological matrices (urine, whole blood, saliva, and hair), as well as in indoor industrial dust samples, and their toxic effects on oxidative stress and health risks in exposed workers. Overall, blood, urine, and saliva samples exhibited significantly higher concentrations of toxic metals in exposed workers (Cr; blood 16.30 μg/L, urine 58.15 μg/L, saliva 5.28 μg/L) than the control samples (Cr; blood 5.48 μg/L, urine 4.47 μg/L, saliva 2.46 μg/L). Indoor industrial dust samples also reported to have elevated heavy metal concentrations, as an example, Cr quantified with concentration of 299 mg/kg of dust, i.e., more than twice the level of Cr in household dust (136 mg/kg). Superoxide dismutase (SOD) level presented significant positive correlation (p?≤?0.01) with Cr, Zn, and Cd (Cr?>?Zn?>?Cd) which is an indication of heavy metal’s associated raised oxidative stress in exposed workers. Elevated average daily intake (ADI) of heavy metals resulted in cumulative hazard quotient (HQ) range of 2.97–18.88 in workers of different surgical units; this is an alarming situation of health risk implications. Principal component analysis-multiple linear regression (PCA-MLR)-based pie charts represent that polishing and cutting sections exhibited highest metal inputs to the biological and environmental matrices than other sources. Heavy metal concentrations in biological matrices and dust samples showed a significant positive correlation between Cr in dust, urine, and saliva samples. Current study will help to generate comprehensive base line data of heavy metal status in biomatrices and dust from scientifically ignored industrial sector. Our findings can play vital role for health departments and industrial environmental management system (EMS) authorities in policy making and implementation.