Vehicular particulate matter emissions in road tunnels in Sao Paulo, Brazil

In the metropolitan area of S?o Paulo, Brazil, ozone and particulate matter (PM) are the air pollutants that pose the greatest threat to air quality, since the PM and the ozone precursors (nitrogen oxides and volatile organic compounds) are the main source of air pollution from vehicular emissions. Vehicular emissions can be measured inside road tunnels, and those measurements can provide information about emission factors of in-use vehicles. Emission factors are used to estimate vehicular emissions and are described as the amount of species emitted per vehicle distance driven or per volume of fuel consumed. This study presents emission factor data for fine particles, coarse particles, inhalable particulate matter and black carbon, as well as size distribution data for inhalable particulate matter, as measured in March and May of 2004, respectively, in the Janio Quadros and Maria Maluf road tunnels, both located in S?o Paulo. The Janio Quadros tunnel carries mainly light-duty vehicles, whereas the Maria Maluf tunnel carries light-duty and heavy-duty vehicles. In the Janio Quadros tunnel, the estimated light-duty vehicle emission factors for the trace elements copper and bromine were 261 and 220 microg km(-1), respectively, and 16, 197, 127 and 92 mg km(-1), respectively, for black carbon, inhalable particulate matter, coarse particles and fine particles. The mean contribution of heavy-duty vehicles to the emissions of black carbon, inhalable particulate matter, coarse particles and fine particles was, respectively 29, 4, 6 and 6 times higher than that of light-duty vehicles. The inhalable particulate matter emission factor for heavy-duty vehicles was 1.2 times higher than that found during dynamometer testing. In general, the particle emissions in S?o Paulo tunnels are higher than those found in other cities of the world.     

Rheological and Mechanical Properties of Poly(lactic acid)/Bio-Based Polyethylene/Clay Biocomposites Containing Montmorillonite and Vermiculite Clays

Journal of Polymers and the Environment - This work aims to investigate the effect of organically modified montmorillonite (OMMT) and vermiculite (OVT) clays on the properties of poly(lactic acid)...     

Environmental performance evaluation of agro-industrial innovations – part 1: Ambitec-Life Cycle,a methodological approach for considering life cycle thinking

As sustainability considerations increasingly dominate the technology development debate worldwide, practical approaches to assess environmental performance of innovations have been warranted. The present study (Part 1) introduces Ambitec-Life Cycle, a method derived from Ambitec-Agro for considering life cycle thinking in the environmental performance evaluation (EPE) of agro-industrial innovations. An agro-industrial innovation case study related to residue recycling is presented, revealing steps in the product life cycle where opportunities are best for technological improvements. In Part 2 (this issue) of this study, a methodological approach for considering the environmental vulnerability of watersheds and to integrate this analysis in EPE methods is presented. This approach is applied to Ambitec-Life Cycle and to the same residue case study, allowing the identification of performance indicators with greater potential to cause impacts at the studied watersheds.     

Nonformal environmental education: a case study with farmers in a town of the South Minas Gerais state,Brazil

Brazil is a central place in the international agricultural markets and this fact has been demanding environmentally oriented agricultural practices by Brazilian farmers and professionals involved in the agricultural market chain. A concise and structured questionnaire was applied to obtain the environmental perception of a group of Brazilian farmers in a town of the south Minas Gerais state, using herbicides as the topic for a case study. A highly variable opinion about taking the environment into account when choosing the most appropriate herbicide was found. Anyway, efficacy has been indicated as the most important factor when choosing an herbicide, followed by the environment and price. The outcomes from the questionnaires, i.e. the insufficient conception and importance given to environment when choosing the herbicide, motivated the creation of a teaching-learning model for the nonformal environmental education using the concept of socio-ecological resilience. This routine puts in practice the resilience thinking currently invoked as a major tool to achieve the conservation of the socio-ecological system, as well as it is complimentary to the outcome-oriented optimization for conservation theory. For the case study about farmers and the use of herbicides, we conclude that a complex reasoning and, ultimately, pro-environmental actions can be improved after experiencing the recommended model for environmental education.     

Calibration of lichen transplants considering faint memory effects

Biomonitoring, among other purposes, can be used as a tool to study the dispersion of trace elements through the atmosphere and back to the earth's surface again. In this sense it has been used for more than 20 years now. Yet, the calibration of biomonitors elemental contents against other atmospheric element dispersion variables like deposition or airborne concentration is still an open subject. The knowledge of a calibration nevertheless represents a qualitative improvement upon the use of biomonitors. Biomonitors elemental contents are usually assumed to depend in a linear way on the average values of atmospheric element dispersion variables, thus a linear regression is assumed to provide a good calibration. In this work: the element dispersion variables like deposition or airborne concentration will be referred in general as availability variables due to reasons that will be clarified; an uptake experiment using transplants of lichen Parmelia sulcata carried out in Portugal during a 2-year period (1994/1996) is described; and new concepts and calibration methods are presented. Lichen and aerosol samples were analysed by nuclear analytical techniques PIXE and INAA, and total deposition dry residue samples were analysed by ICP-MS. A database of roughly 70,000 values was thus created and biomonitor calibration carried out considering that biomonitors are not mechanical instruments but that they rather describe their exposure with a non-perfect memory. Data shows that surveying lichens four times within 1 year, with a period of 3 months in between sampling campaigns, allows the recovery of availability mean, maxima and standard deviation for many elements.     

Indoor air quality in elementary schools of Lisbon in spring

Analysis of indoor air quality (IAQ) in schools usually reveals higher levels of pollutants than in outdoor environments. The aims of this study are to measure indoor and outdoor concentrations of NO₂, speciated volatile organic compounds (VOCs) and carbonyls at 14 elementary schools in Lisbon, Portugal. The investigation was carried out in May–June 2009. Three of the schools were selected to also measure comfort parameters, such as temperature and relative humidity, carbon dioxide (CO₂), carbon monoxide (CO), total VOCs, and bacterial and fungal colony-forming units per cubic metre. Indoor concentrations of CO₂ in the three main schools indicated inadequate classroom air exchange rates. The indoor/outdoor (I/O) NO₂ ratio ranged between 0.36 and 0.95. At the three main schools, the total bacterial and fungal colony-forming units (CFU) in both indoor and outdoor air were above the advised maximum value of 500 CFU/m³ defined by Portuguese legislation. The aromatic compounds benzene, toluene, ethylbenzene and xylenes, followed by ethers, alcohols and terpenes, were usually the most abundant classes of VOCs. In general, the indoor total VOC concentrations were markedly higher than those observed outdoors. At all locations, indoor aldehyde levels were higher than those observed outdoors, particularly for formaldehyde. The inadequate ventilation observed likely favours accumulation of pollutants with additional indoor sources.     

Organochlorine concentrations in franciscana dolphins, Pontoporia blainvillei, from Brazilian waters

Blubber samples were collected from ten franciscana dolphins either incidentally captured in fishing operations or stranded on São Paulo (SP) and Paraná (PR) states littoral, Southeastern and Southern Brazilian coast, respectively. Determination of PCB, DDT and HCB concentrations were performed by capillary gas chromatograph coupled to electron capture detector (ECD). ΣDDT, ΣPCB and HCB concentrations ranged from 264 ng g⁻¹ to 5811 ng g⁻¹ lipid, from 909 ng g⁻¹ to 5849 ng g⁻¹ lipid and from 10 ng g⁻¹ to 61 ng g⁻¹ lipid, respectively. Regarding DDTs, the distribution of the mean percentages decreased in the following order: p,p′-DDE > p,p′-DDD > p,p′-DDT. The ΣDDT/ΣPCB ratio varied between 0.27 and 0.42 in Northern and Central SP coast, while in Southern SP and PR coast the values were 1.6 and 1.9, respectively. Dissimilarities in ΣDDT/ΣPCB ratios point to different sources of organochlorine compounds to franciscana dolphins in the study area. Considering the endocrine disruptive action of organochlorine compounds, the concentrations found in franciscana dolphins from Brazilian waters may represent an additional obstacle to the conservation of this endangered cetacean species.     

Decontamination of produced water containing petroleum hydrocarbons by electrochemical methods: a minireview

Produced water (PW) is the largest waste stream generated in oil and gas industries. The drilling and extraction operations that are aimed to maximize the production of oil may be counterbalanced by the huge production of contaminated water (called PW) with pollutants, such as heavy metals, dissolved/suspended solids, and organic compounds. PW is conventionally treated through different physical, chemical, and biological methods. In offshore platforms, because of space constraints, compact physical and chemical systems are used. However, major research efforts are being developed with innovative technologies for treating PW in order to comply with reuse and discharge limits. Among them, electrochemical technologies have been proposed as a promising alternative for the treatment of this kind of wastewaters. Then, this paper presents a minireview of efficient electrochemical technologies used until now for treating PW generated by petrochemical industry.     

Assessment of carcinogenic heavy metal levels in Brazilian cigarettes

Total mercury (Hg(T)) and bioavailability Hg (Hg(HCl)) concentrations in soil were determined in five districts in Wuhu urban area. Spatial pattern of soil Hg concentration was generated through kriging technology. Results showed that Hg concentration in soil ranged from 0.024 to 2.844 mg kg(?-1) with an average of 0.207 mg kg(?-1). Hg concentration in soil appeared to have a block distribution and decreased from downtown to surrounding district. And Hg concentrations appeared to have a medium scale spatial auto correlation, strongly affected by human activity. The maximal Hg average concentration (0.332 mg kg(?-1)) in soil appeared in Jinghu district, where the high intensity of human activities is. Second highest Hg average concentration (0.263 mg kg(?-1)) in soil appeared in development district, where the intensive industrial activities are. Bioavailability Hg concentration in soil ranged from 2.6 to 4.9 μg kg(?-1) with an average of 3.8 μg kg(?-1), which had a ratio of 0.28~6.44% to total Hg. The ratios of bioavailability Hg to total Hg in vegetable soil were bigger than those of park soil. Correlation analysis showed that total Hg, organic matter, total phosphorus, and bioavailability Hg concentrations in soil were significantly positively correlated. Hg concentration in vegetable ranged from 2.7 to 15.2 μg kg(?-1) with an average of 6.5 μg kg(?-1). Hg concentration in vegetable was positively correlated with Hg(HCl) concentration in soil. According to the calculation on hazard quotient (HQ) for children, inhalation of Hg vapor from soil is the main exposure pathway, in which HQ is 2.517 × 10(?-2), accounting for 80.3% of the four exposure pathways. Hazard index (HI) of the four exposure pathways is lower than the "safe" level of HI = 1; therefore, exposure of soil Hg exhibited little potential health risk to children in Wuhu urban area.