A comparison of the low frequency electrical signatures of iron oxide versus calcite precipitation in granular zero valent iron columns

Geophysical methods have been proposed as technologies for non-invasively monitoring geochemical alteration in permeable reactive barriers (PRBs). We conducted column experiments to investigate the effect of mineralogy on the electrical signatures resulting from iron corrosion and mineral precipitation in Fe0 columns using (a) Na2SO4, and (b) NaHCO3 plus CaCl2 mixture, solutions. At the influent interface where the reactions were most severe, a contrasting time-lapse electrical response was observed between the two columns. Solid phase analysis confirmed the formation of corrosion halos and increased mineralogical complexity in the corroded sections of the columns compared to the minimal/non-corroded sections. We attribute the contrasting time-lapse signatures to the differences in the electrical properties of the mineral phases formed within the two columns. While newly precipitated/transformed polarizable and semi-conductive iron oxides (mostly magnetite and green rust) increase the polarization and conductivity of the sulfate column, the decrease of both parameters in the bicarbonate column is attributed to the precipitation of non-polarizable and non-conductive calcite. Our results show that precipitate mineralogy is an important factor influencing the electrical properties of the corroded iron cores and must be considered if electrical geophysical methods are to be developed to monitor PRB barrier corrosion processes in situ.     

Biodegradation of microcystins and nodularin in freshwaters

Microcystin-LR (MC-LR) was readily biodegraded on addition to six different water samples irrespective of their previous exposure to microcystins. Subsequent studies with water from three of these water bodies confirmed the degradation of MC-LR and also demonstrated the biodegradation of MC-LF, nodularin and mixture of microcystins and nodularin. Rates of degradation of MC-LR, MC-LF and NOD in individual water samples ranged from a half-life of 4 to 18d. Analysis by HPLC-PDA-ESI+ and MALDI MS/MS revealed novel intermediate degradation products of MC-LF and nodularin which included demethylation, hydrolysis, decarboxylation and condensation of the parent compound(s). Our study suggests a possible diversity of micro-organisms and/or pathways which has not been previously observed.     

Enhancing community-based disaster preparedness with information technology

A critical component of community-based disaster preparedness (CBDP) is a local resource database of suppliers providing physical, information and human resources for use in disaster response. Maintenance of such a database can become a collaborative responsibility among community-based non-governmental organisations (NGOs) and public and private community organisations. In addition to mobilising resources, this process raises awareness within the community and aids in assessing local knowledge and resources. This paper presents the results of a pilot study on implementing a community-based resource database through collaboration with local American Red Cross chapters and public and private community organisations. The design of the resource database is described. The resource database is accessible via the internet and offline using laptops and handheld Personal Digital Assistants. The study concludes that CBDP is strengthened through a combination of appropriate information technology and collaborative relationships between NGOs and community-based organisations.     

The impact of the 2004 tsunami on coastal Thai communities: assessing adaptive capacity

The suddenness and scale of the 26 December 2004 tsunami and the challenges posed to affected communities highlighted the benefits of their members having a capacity to confront and adapt to the consequences of such a disaster. Research into adaptive capacity or resilience has been conducted almost exclusively with Western populations. This paper describes an exploratory study of the potential of a measure of collective efficacy developed for Western populations to predict the capacity of members of a collective society, Thai citizens affected by the 2004 tsunami, to confront effectively the recovery demands associated with this disaster. Following a demonstration that this measure could predict adaptive capacity, the role of religious affiliation, ethnicity and place of residence in sustaining collective efficacy is discussed. The implications of the findings for future research on, and intervention to develop, adaptive capacity among Thai citizens in particular and collectivist societies in general are discussed.     

A review of regulations and guidelines related to winter manure application

Winter manure application elevates nutrient losses and impairment of water quality as compared to manure applications in other seasons. In conjunction with reviewing global distribution of animal densities, we reviewed worldwide mandatory regulations and voluntary guidelines on efforts to reduce off-site nutrient losses associated with winter manure applications. Most of the developed countries implement regulations or guidelines to restrict winter manure application, which range from a regulative ban to guidelines based upon weather and field management conditions. In contrast, developing countries lack such official directives, despite an increasing animal production industry and concern over water quality. An analysis of five case studies reveals that directives are derived from a common rationale to reduce off-site manure nutrient losses, but they are also affected by local socio-economic and biophysical considerations. Successful programs combine site-specific management strategies along with expansion of manure storage to offer farmers greater flexibility in winter manure management.     

Metal concentrations in used engine oils: Relevance to site assessments of soils

Used engine oils contain metals, which upon entering soils may pose risks to human health or the environment. In this study, previously published concentrations of 23 metals in 213 used engine oil samples from the early 1970s to the mid-1990s are statistically evaluated. Neat (100%) used engine oils were found to contain relatively high concentrations of lead, calcium, and zinc, attributable to piston blow-by of leaded gasoline, calcium salt detergent additives, and zinc-bearing anti-corrosion/anti-oxidation additives, respectively. Wear metal concentrations were lower. The lead concentration in used engine oils in the U.S. declined between the 1970s and early 1990s, potentially providing a basis to constrain the “age” of used engine oil(s) in soils. The concentrations of 23 metals in used engine oils were compared to soil risk benchmarks in 15 representative jurisdictions in the U.S., Canada, Australia, and Europe. The maximum concentrations in neat (100%) used engine oil of eight metals – Be, Co, Fe, Mn, Ni, Se, Ag, and Ti – were lower than their collective minimum benchmarks in soils for the jurisdictions surveyed, indicating their concentrations in soils could not be reasonably expected to exceed any soil benchmarks. Nine metals (As, Ba, Cd, Cr, Cu, Pb, Sn, V and Zn), but particularly arsenic, cadmium, lead, tin, and zinc, were identified as potential contaminants of concern (PCOC) for soils from locations impacted with used engine oils, owing to their higher median concentrations (i.e., 2.5, 1.4, 1038, 5.0, and 922 mg/kg in oil, respectively) relative to most soil benchmarks. Site-specific benchmarks and metal concentrations at reasonable oil in soil concentrations require consideration when developing the suite of PCOC metal analytes for conducting site assessments of soils impacted by used engine oil.     

Assessing climate change adaptation strategies—the case of drought and heat wave in the French nuclear sector

Regional Environmental Change - Nuclear energy is a very important component of overall power supply in France. If the effects of future extreme weather events or climate shifts are not addressed,...     

Travis Air Force Base: A greener cleanups case study

Travis Air Force Base, California, has accelerated the pace of remediation while reducing long‐term costs and cutting greenhouse gas production. This has been achieved through optimizing existing systems and processes, adopting greener cleanups best management practices, and testing and implementing innovative “green” technologies. By optimizing and replacing existing systems that used energy‐intensive infrastructure, and by promoting the use of innovative in situ technologies, the US Air Force (Air Force) led team comprised of the Air Force Civil Engineer Center, the US Army Corps of Engineers, the performance‐based contractor CH2M, and the regulatory agencies consisting of the US Environmental Protection Agency, the California Water Board, and the California Department of Toxic Substances Control, has reduced annual system operation and maintenance costs by over $200,000 per year, while reducing annual carbon dioxide production by approximately 930 tons per year. As a result of these actions, chlorinated solvent source areas have been reduced by over 99 percent in some cases, and the predicted cleanup time frame for multiple sites has been reduced by several decades. This article provides a case study for implementation of cost‐effective greener cleanup actions, and summarizes the approach taken by the Air Force led team to complete the greener cleanups self‐declaration process consistent with the ASTM International's E‐2893 Standard Guide for Greener Cleanups.     

Technology and science: innovation at the International Symposium on Sustainable Systems and Technology

While science advances technology, it is also true that technology advances science. Thus, the two bodies of knowledge are increasingly recognized as interdependent. Nonetheless, recent advances in information communication technology (ICT), in particular, may have profound implications for the norms by which science is conducted. For example, treatment of data will increasingly be in terms of probability distributions, rather than as point estimates, because the cost of computation is now so low that more robust approaches to treatment of uncertainty are within the grasp of normal science. Perhaps more importantly, the techniques by which scientists collaborate, communicate, and curate science are undergoing a rare period of rapid change. The papers in this special section exemplify the evolution of the relationship between technology and science in these two important ways: (1) treatment of data uncertainties and (2) participation in novel methods of publication and review. The latter was fostered by the 2016 meeting of the International Symposium on Sustainable Systems and Technologies (ISSST), at which all of the papers in this special section were presented. This editorial summarizes some of the trends in ICT that are the subject of experimentation in ISSST and introduces the idea that scientific societies in the information age are more likely to take the form of a network than they are likely to look like the societies of the last several centuries.