Effective elution of RDX and TNT from particles of Comp B in surface soil

During live fire training exercises, large amounts of explosives are consumed. Low order detonations of high explosive payloads result in the patchy dispersal of particles of high explosive formulations over large areas of firing range soils. Dissolution of explosives from explosive formulation particles into soil pore water is a controlling factor for transport, fate, and effects of explosive compounds. We developed an empirical method to evaluate soils based on functionally defined effective dissolution rates. An automated Accelerated Solvent Extractor was used to determine the effective elution rates under controlled conditions of RDX and TNT from soil columns containing particles of Comp B. Contrived soils containing selected soil geosorbants and reactive surfaces were used to quantitatively determine the importance of these materials. Natural soils from training ranges of various soil types were also evaluated. The effects of geosorbants on effective elution rates were compound- and sorbent-specific. TNT elution was less than that of RDX and was greatly slowed by humic acid. Iron and iron-bearing clays reduced the effective elution rates of both RDX and TNT. This empirical method is a useful tool for directly generating data on the potential for explosives to leach from firing range soils, to identify general bulk soil characteristics that can be used to predict the potential, and to identify means to engineer soil treatments to mitigate potential transport.     

Biodegradation of microcystins and nodularin in freshwaters

Microcystin-LR (MC-LR) was readily biodegraded on addition to six different water samples irrespective of their previous exposure to microcystins. Subsequent studies with water from three of these water bodies confirmed the degradation of MC-LR and also demonstrated the biodegradation of MC-LF, nodularin and mixture of microcystins and nodularin. Rates of degradation of MC-LR, MC-LF and NOD in individual water samples ranged from a half-life of 4 to 18d. Analysis by HPLC-PDA-ESI+ and MALDI MS/MS revealed novel intermediate degradation products of MC-LF and nodularin which included demethylation, hydrolysis, decarboxylation and condensation of the parent compound(s). Our study suggests a possible diversity of micro-organisms and/or pathways which has not been previously observed.     

A comparison of the low frequency electrical signatures of iron oxide versus calcite precipitation in granular zero valent iron columns

Geophysical methods have been proposed as technologies for non-invasively monitoring geochemical alteration in permeable reactive barriers (PRBs). We conducted column experiments to investigate the effect of mineralogy on the electrical signatures resulting from iron corrosion and mineral precipitation in Fe0 columns using (a) Na2SO4, and (b) NaHCO3 plus CaCl2 mixture, solutions. At the influent interface where the reactions were most severe, a contrasting time-lapse electrical response was observed between the two columns. Solid phase analysis confirmed the formation of corrosion halos and increased mineralogical complexity in the corroded sections of the columns compared to the minimal/non-corroded sections. We attribute the contrasting time-lapse signatures to the differences in the electrical properties of the mineral phases formed within the two columns. While newly precipitated/transformed polarizable and semi-conductive iron oxides (mostly magnetite and green rust) increase the polarization and conductivity of the sulfate column, the decrease of both parameters in the bicarbonate column is attributed to the precipitation of non-polarizable and non-conductive calcite. Our results show that precipitate mineralogy is an important factor influencing the electrical properties of the corroded iron cores and must be considered if electrical geophysical methods are to be developed to monitor PRB barrier corrosion processes in situ.     

The use of the removable thin film coating technique as an alternative to traditional decontamination methods to mitigate and abate hazardous particulates

This article summarizes a study that evaluated a new decontamination technique for the mitigation and abatement of hazardous dust and particulates. Traditional decontamination methods are time‐consuming, expensive, can create airborne hazards, and do not always bring the concentration of the contaminant to acceptable levels. The use of the removable thin film coating will increase efficiency, will not generate airborne hazards, will decrease costs, and, with one application, will bring the hazardous dust concentrations to acceptable levels. Qualitative tests demonstrated that the removable thin film coating reduced the amount of visible luminescent dust (a surrogate for hazardous dust) from various surfaces. It also indicated that wherever there were minute scratches, the coating did not remove all of the dust. However, the qualitative tests showed that this decontamination method worked well as a preventative method, protecting clean areas from becoming contaminated when exposed to the luminescent dust. Further investigation was conducted using a scanning electron microscope (SEM) and carbon dust. Overall, the SEM experiment demonstrated that there was a statistically significant (p = 0.00007) removal of carbon dust (less than 10 μm in size) from surfaces with crevasses larger than 3 μm. The SEM also revealed that there were some limitations where there were large clusters of carbon dust; in these instances, the coating would tear and remain on the sample surface. One method to resolve this limitation involved adding Kevlar^TM fibers to the removable thin film coating. It was thought that this would increase the strength of the coating and eliminate the coating from tearing when removing large clusters of a contaminant. Unfortunately, this did not alleviate the issue. The use of an engineered textile, saturated with the coating, appeared to eliminate the problem with the coating not being able to remove the contaminant from the minute surface scratches and improved the removal process of the coating. © 2008 Wiley Periodicals, Inc.     

Acute aquatic toxicity of western juniper (Juniperus occidentalis) foliage and Port Orford cedar (Chamaecyparis lawsoniana) heartwood oils

Recently, interest has developed for using essential oils from Western juniper (Juniperus occidentalis) foliage and Port Orford cedar (Chamaecyparis lawsoniana) heartwood in commercial products such as pest repellents and cosmetics. In order to gauge the relative toxicological risk that these oils pose to freshwater and marine organisms, the acute aquatic toxicity of these oils was evaluated using OPPTS guidelines to the cladoceran Daphnia magna, the rainbow trout Oncorhynchus mykiss and the green alga Selenastrum capricornutum. For western juniper foliage oil, no toxicity was exhibited toward D. magna or O. mykiss, even at 5.0 mg/L (the highest concentration tested and limit of solubility). For toxicity to S. capricornutum using algal cell density, the 72 and 96 h EC₅₀ value was 1.7 mg/L and the no observable effect concentration (NOEC) was 0.63 mg/L. For Port Orford cedar heartwood oil, no toxicity was exhibited toward O. mykiss or S. capricornutum, even at 5.0 mg/L (the highest concentration tested and limit of solubility). The 48-h D. magna EC₅₀ value was 1.9 mg/L; the NOEC values for algal cell density were 1.25 mg/L (72 h) and 0.63 mg/L (96 h). In summary, this study shows that western juniper foliage and Port Orford cedar heartwood oils demonstrate little to no risk to aquatic organisms.     

Mathematical Modeling of Column and Field Dense Nonaqueous Phase Liquid Tracer Tests

Mathematical models for the simulation of dense nonaqueous phase liquid tracer tests (DTTs) in laboratory columns and in the field are developed and examined. The DTT technique is a means of estimating the quantity of dense nonaqueous phase liquid (DNAPL) in a domain of interest in an aquifer. The two-dimensional field DTT model uses the Method of Principal Directions and an asymmetrical upwind algorithm for describing advective transport. Both models include diffusion transport of tracer into and from low-permeability porous structures such as clay lenses, as well as the mass transport kinetics of partitioning tracer to and from the DNAPL droplets. The dependence of the effluent tracer concentration curves on the parameters of the models is explored, and conclusions are drawn regarding the applicability of, and several possible problems with, the DTT technique. Model results indicate that the DTT performs well at locating distributed droplets of DNAPL, but is unlikely to be useful in the assessment of pooled DNAPL.     

Consistent personality differences in house-hunting behavior but not decision speed in swarms of honey bees (<Emphasis Type="BoldItalic">Apis mellifera</Emphasis>)

Speed-accuracy tradeoffs are a common feature of decision-making processes, both in individual animals and in groups of animals working together to reach a single collective decision. Individual organisms display consistent differences in their “impulsivity,” and vary in their tendency to make rapid, impulsive choices as opposed to slower, more accurate decisions. However, we do not yet know whether groups of animals consistently differ in their tendency to prioritize decision speed over accuracy. We challenged 17 swarms of honey bees (Apis mellifera) to simultaneously choose a new nest site in each of three locations, and measured their decision speeds in each trial. We found that swarms displayed consistent personality differences in the number of waggle dances and shaking signals they performed and in how actively they scouted for new nest sites. However, swarms did not consistently differ in how long they took to choose a nest site. We suggest that house-hunting A. mellifera swarms may place an especially high emphasis on decision accuracy when choosing a nest site, and that chance events—such as the time when each swarm discovers a sufficiently high-quality nest site—may consequently play a greater role in determining a swarm’s decision speed than intrinsic characteristics such as a swarm’s “impulsivity.”     

Africanized honeybees are slower learners than their European counterparts

Does cognitive ability always correlate with a positive fitness consequence? Previous research in both vertebrates and invertebrates provides mixed results. Here, we compare the learning and memory abilities of Africanized honeybees (Apis mellifera scutellata hybrid) and European honeybees (Apis mellifera ligustica). The range of the Africanized honeybee continues to expand, superseding the European honeybee, which led us to hypothesize that they might possess greater cognitive capabilities as revealed by a classical conditioning assay. Surprisingly, we found that fewer Africanized honeybees learn to associate an odor with a reward. Additionally, fewer Africanized honeybees remembered the association a day later. While Africanized honeybees are replacing European honeybees, our results show that they do so despite displaying a relatively poorer performance on an associative learning paradigm.