Analysis of a system for remote, dry removal of solidified mixed waste

This paper describes a novel technology for the removal of solidified radioactive waste from underground storage tanks at the DOE Hanford site in southeast Washington. The process involves the use of a unique high pressure system which pulverizes the hardened saltcake with stainless steel pellets to a powder for easy vacuum removal. The steel pellets can be magnetically separated from the waste material for re-use. Specifically this study analyzes the effects of various steel abrasives, pressure of the air stream, and stand-off distance on removal rates and penetration depth on simulated saltcake samples using the high pressure technique. A full-scale test set-up and protocol were implemented to allow for comprehensive testing. To insure reproducibility of the method, tests were then run for the optimum removal parameters. A time-dependent test was also conducted to determine the relationship of removal rates to length of pressure blasts. The results of these tests revealed that stand-off distance and pressure could be positively correlated to removal volumes. Additionally, a statistical analysis confirmed that nozzle angle is independent of removal rate. This study demonstrated that the pellet ‘blaster’ technique is a safe, effective method for removal of radioactive wastes without any increase in either waste mass or volume.     

Pedestrian fatalities, Atlanta Metropolitan Statistical Area and United States, 2000-2004

Motor vehicle crashes killed almost 5,000 pedestrians in 2005 in the United States. Pedestrian risk may be higher in areas characterized by urban sprawl. From 2000 to 2004, pedestrian fatality rates declined in the United States, but the Atlanta metropolitan statistical area did not experience the same decline. Pedestrian fatality rates for males, Hispanics, and the 15–34 and 35–54 year age groups were higher in Atlanta than in the United States overall. Pedestrian safety interventions should be targeted to high-risk populations and localized pedestrian settings.     

Ecosystem Responses to Extreme Natural Events: Impacts of Three Sequential Hurricanes in Fall 1999 on Sediment Quality and Condition of Benthic Fauna in the Neuse River Estuary, North Carolina

A study was conducted in November 1999 to assess sediment quality and condition of benthic fauna in the Neuse River Estuary (NRE), North Carolina, USA, following the passage of three Atlantic hurricanes during the two months prior. Samples for analysis of macroinfauna (>0.5 mm sieve size), chemical contamination of sediments, and other abiotic environmental variables (salinity, dissolved oxygen, pH, depth, sediment granulometry) were collected at 20 sites from the mouth of the Neuse River at Pamlico Sound to approximately 90 km upstream. Results were compared to those obtained from the same area in July 1998 using similar protocols. Depressed salinity, caused by extreme rainfall and associated high freshwater flow, persisted throughout much of the estuary, which had experienced periods of water-column stratification and hypoxia of underlying waters. Fifteen of the 20 sites, representing 299 km² (76% of the survey area), also showed signs of benthic stress based on a multi-metric benthic index of biotic integrity (B-IBI). Benthic impacts included reductions in the abundance, diversity, and numbers of species and shifts in taxonomic composition, with a notable increase in dominance of the opportunistic polychaete Mediomastus ambiseta as other former dominant species declined. There was no significant increase in the extent of chemical contamination compared to pre-hurricane conditions. Storm-related reductions in dissoved oxygen and salinity were the more likely causes of the observed benthic impacts, though it was not possible, based on these results, to separate storm effects from seasonal changes in the benthos and annual episodes of summer anoxia and hypoxia.     

Patterns of catch and trophic signatures illustrate diverse management requirements of coastal fisheries in Solomon Islands

Coastal fisheries are a critical component of Pacific island food systems; they power village economies and provide nutritious aquatic foods. Many coastal women and men actively fishing in this region rely on multi-species fisheries, which given their extraordinary diversity are notoriously difficult to both characterize, and to manage. Understanding patterns of fishing, diversity of target species and drivers of these patterns can help define requirements for sustainable management and enhanced livelihoods. Here we use a 12-month data set of 8535 fishing trips undertaken by fishers across Malaita province, Solomon Islands, to create fisheries signatures for 13 communities based on the combination of two metrics; catch per unit effort (CPUE) and catch trophic levels. These signatures are in turn used as a framework for guiding suitable management recommendations in the context of community-based resource management. While a key proximate driver of these patterns was fishing gear (e.g. angling, nets or spearguns), market surveys and qualitative environmental information suggest that community fishing characteristics are coupled to local environmental features more than the market value of specific species they target. Our results demonstrate that even within a single island not all small-scale fisheries are equal, and effective management solutions ultimately depend on catering to the specific environmental characteristics around individual communities.Supplementary InformationThe online version contains supplementary material available at 10.1007/s13280-021-01690-z.     

Aquaculture practices and potential human health risks: current knowledge and future priorities

Annual global aquaculture production has more than tripled within the past 15 years, and by 2015, aquaculture is predicted to account for 39% of total global seafood production by weight. Given that lack of adequate nutrition is a leading contributor to the global burden of disease, increased food production through aquaculture is a seemingly welcome sign. However, as production surges, aquaculture facilities increasingly rely on the heavy input of formulated feeds, antibiotics, antifungals, and agrochemicals. This review summarizes our current knowledge concerning major chemical, biological and emerging agents that are employed in modern aquaculture facilities and their potential impacts on public health. Findings from this review indicate that current aquaculture practices can lead to elevated levels of antibiotic residues, antibiotic-resistant bacteria, persistent organic pollutants, metals, parasites, and viruses in aquacultured finfish and shellfish. Specific populations at risk of exposure to these contaminants include individuals working in aquaculture facilities, populations living around these facilities, and consumers of aquacultured food products. Additional research is necessary not only to fully understand the human health risks associated with aquacultured fish versus wild-caught fish but also to develop appropriate interventions that could reduce or prevent these risks. In order to adequately understand, address and prevent these impacts at local, national and global scales, researchers, policy makers, governments, and aquaculture industries must collaborate and cooperate in exchanging critical information and developing targeted policies that are practical, effective and enforceable.     

Aboriginal world views and colonisation: implications for coastal sustainability†

In this paper, we show how the Aboriginal people in the south-west of Australia (the Nyungar) developed systems of knowledge, of caring for country and of family relations that enabled them to survive for tens of thousands of years and continue to have importance today. The impacts of British colonisation on cultural continuity and knowledge in the south-west have been significant and include loss of land, break-up of families and massacre. These practices led to a loss of knowledge of language and culture in some cases. However, Nyungar culture is alive and dynamic, constantly being reclaimed, re-energised and rebuilt through the interaction of contemporary and traditional research praxis. Focusing on Derbal Nara (Cockburn Sound) on the coast in the southern metropolitan area of Perth, we provide case examples of the action-research-learning methodologies used by Whadjuk Nyungar Traditional Owners. We also provide examples of stories about Derbal Nara that are still alive and being recounted up to the present day, including those that account for the recent ice age and the end of the ice age 8000 years BC when sea levels rose, drowning land in the area of Derbal Nara. Finally, we argue that Whadjuk Nyungar experiences and world views based on relationality and reflexivity are central to sustainable coastal management and that in some respects there has already been a convergence of Indigenous and Western coastal management. We present a set of principles that support the development of this “third space” for coastal sustainability.     

Bioavailability and mass balance studies of a commercial pentabromodiphenyl ether mixture in male Sprague-Dawley rats

Cyanogenic glycosides are common plant toxins. Toxic hydrogen cyanide originating from cyanogenic glycosides may affect soil processes and water quality. In this study, hydrolysis, degradation and sorption of dhurrin (4-hydroxymandelonitrile-beta-d-glucoside) produced by sorghum has been studied in order to assess its fate in soil. The log K(ow) of dhurrin was -1.18+/-0.08 (22 degrees C). Hydrolysis was a first-order reaction with respect to dhurrin and hydroxyl ion concentrations. Half lives ranged from 1.2h (pH 8.6; 25 degrees C) to 530d (pH 4; 25 degrees C). The activation energy of hydrolysis was 112+9kJ. At pH 5.8 and room temperature, addition of humic acids (50gl(-1)) increased the rate of hydrolysis tenfold, while addition of kaolinite or goethite (100-250gl(-1)) both decreased the rate considerably. No significant sorption to soil components could be observed. The degradation rates of dhurrin in top and subsoils of Oxisols, Ultisols, Alfisols and Mollisols were studied at 22 degrees C (25mgl(-1), soil:liquid 1:1 (w:V), pH 3.8-8.1). Half-lives were 0.25-2h for topsoils, and 5-288h in subsoils. Hydrolysis in solution explained up to 45% of the degradation in subsoils whereas the contribution in topsoils was less than 14%, indicating the importance of enzymatic degradation processes. The highest risk of dhurrin leaching will take place when the soil is a low activity acid shallow soil with low content of clay minerals, iron oxides and humic acids.     

The use of the removable thin film coating technique as an alternative to traditional decontamination methods to mitigate and abate hazardous particulates

This article summarizes a study that evaluated a new decontamination technique for the mitigation and abatement of hazardous dust and particulates. Traditional decontamination methods are time‐consuming, expensive, can create airborne hazards, and do not always bring the concentration of the contaminant to acceptable levels. The use of the removable thin film coating will increase efficiency, will not generate airborne hazards, will decrease costs, and, with one application, will bring the hazardous dust concentrations to acceptable levels. Qualitative tests demonstrated that the removable thin film coating reduced the amount of visible luminescent dust (a surrogate for hazardous dust) from various surfaces. It also indicated that wherever there were minute scratches, the coating did not remove all of the dust. However, the qualitative tests showed that this decontamination method worked well as a preventative method, protecting clean areas from becoming contaminated when exposed to the luminescent dust. Further investigation was conducted using a scanning electron microscope (SEM) and carbon dust. Overall, the SEM experiment demonstrated that there was a statistically significant (p = 0.00007) removal of carbon dust (less than 10 μm in size) from surfaces with crevasses larger than 3 μm. The SEM also revealed that there were some limitations where there were large clusters of carbon dust; in these instances, the coating would tear and remain on the sample surface. One method to resolve this limitation involved adding Kevlar^TM fibers to the removable thin film coating. It was thought that this would increase the strength of the coating and eliminate the coating from tearing when removing large clusters of a contaminant. Unfortunately, this did not alleviate the issue. The use of an engineered textile, saturated with the coating, appeared to eliminate the problem with the coating not being able to remove the contaminant from the minute surface scratches and improved the removal process of the coating. © 2008 Wiley Periodicals, Inc.