Differences in Long-term Medical Consequences Depending on Impact Direction Involving Passenger Cars

Objective: There is limited knowledge of the long-term medical consequences for occupants injured in car crashes in various impact directions. Thus, the objective was to evaluate whether injuries leading to permanent medical impairment differ depending on impact direction.

Methods: In total, 36,743 injured occupants in car crashes that occurred between 1995 and 2011 were included. All initial injuries (n = 61,440) were classified according to the Abbreviated Injury Scale (AIS) 2005. Injured car occupants were followed for at least 3 years to assess permanent medical impairment. The data were divided into different groups according to impact direction and levels of permanent impairment. The risk of permanent medical impairment was established for different body regions and injury severity levels, according to AIS.

Results: It was found that almost 12% of all car occupants sustained a permanent medical impairment. Given an injury, car occupants involved in rollover crashes had the highest overall risk to sustain a permanent medical impairment. Half of the head injuries leading to long-term consequences occurred in frontal impacts. Far-side occupants had almost the same risk as near-side occupants. Occupants who sustained a permanent medical impairment from cervical spine injuries had similar risk in all impact directions (13%) except from rollover (17%). However, these injuries occurred more often in rear crashes. Most of the injuries leading to long-term consequences were classified as minor injuries by AIS for all impact directions.

Conclusions: Studying crash data from a perspective of medical impairment is important to identify injuries that might not be prioritized only considering the AIS but might lead to lower quality of life for the occupant and also costs for society. These results can be used for road transport system strategies and for making priority decisions in vehicle design.     

Social familiarity modulates group living and foraging behaviour of juvenile predatory mites

Environmental stressors during early life may have persistent consequences for phenotypic development and fitness. In group-living species, an important stressor during juvenile development is the presence and familiarity status of conspecific individuals. To alleviate intraspecific conflicts during juvenile development, many animals evolved the ability to discriminate familiar and unfamiliar individuals based on prior association and use this ability to preferentially associate with familiar individuals. Assuming that familiar neighbours require less attention than unfamiliar ones, as predicted by limited attention theory, assorting with familiar individuals should increase the efficiency in other tasks. We assessed the influence of social familiarity on within-group association behaviour, development and foraging of juvenile life stages of the group-living, plant-inhabiting predatory mite Phytoseiulus persimilis. The observed groups consisted either of mixed-age familiar and unfamiliar juvenile mites or of age-synchronized familiar or unfamiliar juvenile mites or of pairs of familiar or unfamiliar larvae. Overall, familiar mites preferentially grouped together and foraged more efficiently, i.e. needed less prey at similar developmental speed and body size at maturity, than unfamiliar mites. Preferential association of familiar mites was also apparent in the inter-exuviae distances. Social familiarity was established by imprinting in the larval stage, was not cancelled or overridden by later conspecific contacts and persisted into adulthood. Life stage had an effect on grouping with larvae being closer together than nymphal stages. Ultimately, optimized foraging during the developmental phase may relax within-group competition, enhance current and future food supply needed for optimal development and optimize patch exploitation and leaving under limited food.     

Assessment of the benefits of climate model weights for ensemble analysis in three urban precipitation frequency studies

In hydrology, projected climate change impact assessment studies typically rely on ensembles of downscaled climate model outputs. Due to large modeling uncertainties, the ensembles are often averaged to provide a basis for studying the effects of climate change. A key issue when analyzing averages of a climate model ensemble is whether to weight all models in the ensemble equally, often referred to as the equal-weights or unweighted approach, or to use a weighted approach, where, in general, each model would have a different weight. Many studies have advocated for the latter, based on the assumption that models that are better at simulating the past, that is, the models with higher hindcast accuracy, will give more accurate forecasts for the future and thus should receive higher weights. To examine this issue, observed and modeled daily precipitation frequency (PF) estimates for three urban areas in the United States, namely Boston, Massachusetts; Houston, Texas; and Chicago, Illinois, were analyzed. The comparison used the raw output of 24 Coupled Model Intercomparison Project Phase 5 (CMIP5) models. The PFs from these models were compared with the observed PFs for a specific historical training period to determine model weights for each area. The unweighted and weighted averaged model PFs from a more recent testing period were then compared with their corresponding observed PFs to determine if weights improved the estimates. These comparisons indeed showed that the weighted averages were closer to the observed values than the unweighted averages in nearly all cases. The study also demonstrated how weights can help reduce model spread in future climate projections by comparing the unweighted and weighted ensemble standard deviations in these projections. In all studied scenarios, the weights actually reduced the standard deviations compared to the equal-weights approach. Finally, an analysis of the results' sensitivity to the areal reduction factor used to allow comparisons between point station measurements and grid-box averages is provided.     

Performance evaluation of a decentralized wastewater treatment system in India

A Decentralized Wastewater Treatment System (DEWATS) provides an economically feasible and efficient wastewater treatment solution especially in developing countries. It has an enormous potential for developing a sustainable environmental sanitation system. In this study, the treatment efficiency of eight DEWATS plants was evaluated in the state of Maharashtra, India, for their performance in terms of selected physico-chemical parameters of the wastewater. Although the efficiency of some of the plants was lower than that reported in literature, the effluent quality of all the plants was within the permissible discharge limits of the Central Pollution Control Board for all the parameters. Comprehensive assessment of Plant I was carried in terms of its technical and socio-economic aspects. Moreover, LCA tool has been utilized to evaluate the environmental impacts of the operation stage of DEWATS. The midpoint, CML 2001 (April 2015) methodology was adopted, in which 11 impact categories were considered. From the life cycle impact assessment and interpretation, the main impacts are identified as releases of COD, P-PO₄^3?, and N-NH₄⁺ to water bodies and disposal of sludge. Due to negligible energy consumption, the operation stage was found to be less damaging to the environment. It was concluded that DEWATS can be a good alternative for treating wastewater with negligible energy and chemical consumption.

     

The development of loads of cations, anions, Cd and Pb in precipitation and of atmospheric concentrations of N-components, in Switzerland from 1988 to 2003

This study presents the results of the analyses of Cd, Pb, cations and anions present in precipitation and dust at a pre-alpine and a suburban site in Switzerland in the period from 1988 to 2003. The aim of these measurements was to monitor the success of measures taken to diminish pollutant emissions. No change was found for Ca²⁺, K⁺, Na⁺ and Mg²⁺ loads – in line with expectations, as no reducing measures had been taken. Statistically significant and largely decreasing values (50–90%) were found for Cl⁻ and Cd (linked to the fitting of filters in incineration plants), Pb (unleaded petrol), (diminishing the use of mineral oil with high S content), and the proton (lower HCl and SO₂ emissions). A smaller decrease (up to 30%) or none was registered for oxidised nitrogen components (fitting cars with catalytic converters, but an increase in numbers of cars and trucks). No significant change was found for NH₃ as farming techniques had undergone no major changes. The long-term measurements show that the measures taken to reduce emissions were successful. A shorter monitoring period would have been misleading owing to data variability and temporary incidents e.g. amount of precipitation.     

欧洲非政府机构对运输和环境的观点

在向可持续运输发展的过程中有两个关键的问题需要提出:即如何扩展接近可持续运输的途径与如何使运输根据污染者付费原则支付它的环境费用.瑞士已经在实行阐明了这两个问题的政策.国家当局很难提出迅速增长的航空工业的环境冲击,特别是考虑到其全球的性质.     

Informal electronic waste recycling: a sector review with special focus on China

Informal recycling is a new and expanding low cost recycling practice in managing Waste Electrical and Electronic Equipment (WEEE or e-waste). It occurs in many developing countries, including China, where current gaps in environmental management, high demand for second-hand electronic appliances and the norm of selling e-waste to individual collectors encourage the growth of a strong informal recycling sector. This paper gathers information on informal e-waste management, takes a look at its particular manifestations in China and identifies some of the main difficulties of the current Chinese approach. Informal e-waste recycling is not only associated with serious environmental and health impacts, but also the supply deficiency of formal recyclers and the safety problems of remanufactured electronic products. Experiences already show that simply prohibiting or competing with the informal collectors and informal recyclers is not an effective solution. New formal e-waste recycling systems should take existing informal sectors into account, and more policies need to be made to improve recycling rates, working conditions and the efficiency of involved informal players. A key issue for China’s e-waste management is how to set up incentives for informal recyclers so as to reduce improper recycling activities and to divert more e-waste flow into the formal recycling sector.     

Exposure reduction of seed treatments through dehusking behaviour of the wood mouse <Emphasis Type="Bold">(</Emphasis><Emphasis Type="Italic">Apodemus sylvaticus</Emphasis><Emphasis Type="Bold">)</Emphasis>

Background, aim and scope  

Seed treatments are widely used on cereals and other annual crops throughout Europe. Most of the formulated pesticide is found on the outside of the seed, the husk. Risk assessments of seed treatments are especially needed for granivorous mice living in the agricultural landscape e.g. for registration using the guidance for risk assessment for birds and mammals (EFSA 2009). The dehusking of seeds before consumption is a known behaviour of these mammals, but so far, no quantitative data on the reduction of exposure of seed treatments by dehusking were published. Therefore, we aimed at providing a first quantitative estimate of this behaviour-related exposure reduction for the wood mouse (Apodemus sylvaticus) with different seed types.     

The OECD validation program of the H295R steroidogenesis assay: Phase 3. Final inter-laboratory validation study

Background, goals, and scope

In response to increasing concerns regarding the potential of chemicals to interact with the endocrine system of humans and wildlife, various national and international programs have been initiated with the aim to develop new guidelines for the screening and testing of these chemicals in vertebrates. Here, we report on the validation of an in vitro assay, the H295R steroidogenesis assay, to detect chemicals with the potential to inhibit or induce the production of the sex steroid hormones testosterone (T) and 17??-estradiol (E2) in preparation for the development of an Organization for Economic Cooperation and Development (OECD) test guideline.

Methods

A previously optimized and pre-validated protocol was used to assess the potential of 28 chemicals of diverse structures and properties to validate the H295R steroidogenesis assay. These chemicals are comprised of known endocrine-active chemicals and ??negative?? chemicals that were not expected to have effects on the targeted endpoints, as well as a number of test chemicals with unknown modes of action at the level of the steroidogenic pathway. A total of seven laboratories from seven countries participated in this effort. In addition to effects on hormone production, confounding factors, such as cell viability and possible direct interference of test substances with antibody-based hormone detection assays, were assessed. Prior to and during the conduct of exposure experiments, each laboratory had to demonstrate that they were able to conduct the assay within the margin of predefined performance criteria.

Results

With a few exceptions, all laboratories met the key quality performance parameters, and only 2% and 7% of all experiments for T and E2, respectively, were excluded due to exceedance of these parameters. Of the 28 chemicals analyzed, 13 and 14 tested affected production of T and E2, respectively, while 11 and 8 did not result in significant effects on T and E2 production, respectively. Four and six chemicals produced ambiguous results for effects on T and E2 production, respectively. However, four of these cases each for T and E2 were associated with only one laboratory after a personnel change occurred. Significant interference of test chemicals with some of the antibody-based hormone detection systems occurred for four chemicals. Only one of these chemicals, however, significantly affected the ability of the detection system to categorize the chemical as affecting E2 or T production.

Discussion and conclusions

With one exception, the H295R steroidogenesis assay protocol successfully identified the majority of chemicals with known and unknown modes of interaction as inducers or inhibitors of T and E2 production. Thus it can be considered a reliable screen for chemicals that can alter the production of sex steroid hormones. One of the remaining limitations associated with the H295R steroidogenesis assay protocol is the relatively small basal production of E2 and its effect on quantifying the decreased production of this hormone with regard to the identification of weak inhibitors. An initial comparison of the data produced in this study with those from in vivo studies from the literature demonstrated the potential of the H295R steroidogenesis assay to identify chemicals affecting hormone homeostasis in whole organisms. Particularly promising was the lack of any false negatives during the validation and the very low number of false positives (1 out of 28 chemicals for each T and E2).

Perspectives

Based on the results obtained during this validation study and the accordingly revised test protocols, an OECD draft test guideline was developed and submitted to the OECD working group of the national coordinators of the test guidelines program (WNT) for comments in December 2009.