Sampling gaseous oxidation products of aromatic compounds in gas/particle separation systems

In this study we performed a direct comparison between two different ambient air samplers to characterize their performance in sampling oxidized gaseous organic compounds, known as oxidation products of aromatics. We investigated compounds with a variety of functional groups and vapor pressures. A polyurethane foam (PUF) adsorbent and an annular diffusion denuder sampler were operated along with particle filters. In both systems the sampling devices were liquid-extracted, followed by derivatization and analysis by GC-MS. The PUF system works very well for aromatic as well as non-aromatic compounds, whereas the denuder shows smaller collection efficiencies for highly volatile non-aromatic compounds. In addition, the sampling efficiencies in the PUF set-up are in good agreement with the calculated vapor pressures of the compounds and also the particle phase is not affected by most compounds.     

Effects of soil-applied lead on seedling growth and ectomycorrhizal colonization of loblolly pine

Six-month-old loblolly pine (Pinus taeda) were grown for 15 weeks in two native soils amended with 0, 30, 60, 120, 240 or 480 mg kg(-1) Pb as PbCl2. Ectomycorrhizae were quantified, by morphotype, as the total number of tips per centimeter, and as the number of tips for each morphotype and for Cenococcum geophilum. Total numbers of non-ectomycorrhizal short roots and necrotic tips were recorded. Total height and biomass exhibited a non-linear response to soil-applied lead. Growth generally was greatest in the controls and higher treatments, and least in the intermediate treatments. In both soils, Pb concentrations in roots increased linearly with increasing levels of soil-applied Pb. Neither foliage nor stems exhibited significant increases in Pb concentrations with increasing levels of Pb. Significant linear decreases in total numbers of ectomycorrhizal tips and significant linear increases in non-ectomycorrhizal short roots and necrotic tips occurred with increasing levels of Pb in the soil. The majority of individual morphotypes decreased with increasing Pb. However, the number of ectomycorrhizal tips formed by C. geophilium increased with increasing soil Pb levels after 15 weeks of treatment. These results indicate that short-term loblolly pine seedling growth is not inhibited by increasing Pb levels. Ectomycorrhizal formation decreased, and alterations in species composition occurred as a result of increasing concentrations of soil-applied Pb. These effects on ectomycorrhizae may cause long-term changes in nutrient and water balances, which could reduce tree vigor.     

Intercomparison study on commonly used methods to determine microplastics in wastewater and sludge samples

Environmental Science and Pollution Research - The harmonized procedures in terms of the sampling, sample treatment and identification of microplastics in different environmental samples are...     

Project house water: a novel interdisciplinary framework to assess the environmental and socioeconomic consequences of flood-related impacts

Protecting our water resources in terms of quality and quantity is considered one of the big challenges of the twenty-first century, which requires global and multidisciplinary solutions. A specific threat to water resources, in particular, is the increased occurrence and frequency of flood events due to climate change which has significant environmental and socioeconomic impacts. In addition to climate change, flooding (or subsequent erosion and run-off) may be exacerbated by, or result from, land use activities, obstruction of waterways, or urbanization of floodplains, as well as mining and other anthropogenic activities that alter natural flow regimes. Climate change and other anthropogenic induced flood events threaten the quantity of water as well as the quality of ecosystems and associated aquatic life. The quality of water can be significantly reduced through the unintentional distribution of pollutants, damage of infrastructure, and distribution of sediments and suspended materials during flood events. To understand and predict how flood events and associated distribution of pollutants may impact ecosystem and human health, as well as infrastructure, large-scale interdisciplinary collaborative efforts are required, which involve ecotoxicologists, hydrologists, chemists, geoscientists, water engineers, and socioeconomists. The research network “project house water” consists of a number of experts from a wide range of disciplines and was established to improve our current understanding of flood events and associated societal and environmental impacts. The concept of project house and similar seed fund and boost fund projects was established by the RWTH Aachen University within the framework of the German excellence initiative with support of the German research foundation (DFG) to promote and fund interdisciplinary research projects and provide a platform for scientists to collaborate on innovative, challenging research. Project house water consists of six proof-of-concept studies in very diverse and interdisciplinary areas of research (ecotoxicology, water, and chemical process engineering, geography, sociology, economy). The goal is to promote and foster high-quality research in the areas of water research and flood-risk assessments that combine and build off-laboratory experiments with modeling, monitoring, and surveys, as well as the use of applied methods and techniques across a variety of disciplines.     

Determination of polycyclic aromatic hydrocarbons and substitutes (Nitro-, Oxy-PAHs) in urban soil and airborne particulate by GC-MS and NCI-MS/MS

A method involving high resolution gas chromatography combined with ion trap (HRGC-MS/MS) and negative chemical ionisation (NCI) was developed for the determination of nitrated or oxygenated polycyclic aromatic hydrocarbons (nitro-PAHs, oxy-PAHs) and other electrophilic substitutes in soil samples. Efficient clean-up was achieved by a combination of methods for the determination of PAHs in soil and nitro-PAHs in aerosol using solid phase extraction (SPE) and semipreparative high performance liquid chromatography (HPLC). In samples of surface soil from the city of Basle (Switzerland), nitro-PAHs (mainly 3-nitrofluoranthene and 1-nitropyrene) were found in concentrations between 30 and 800 ng/kg dry weight. Oxy-PAHs and parent PAHs revealed 10²-10⁴-fold higher levels. Nitro-PAHs which are up to 10⁵ times more mutagenic seem to be less persistent in soil than the parent forms, although their entire mutagenic potential has to be estimated as being on the same order of magnitude. In urban air particulate matter, the amounts of nitro-PAHs (2–62 pg/m³) were 10–100 times lower than oxyPAHs and parent PAHs which were both found in a similar range. 3-nitrobenzanthrone, a recently described suspected human carcinogen has not yet been detected. Using multivariate statistical analysis, it was possible to elucidate similarities or special characteristics of substances in a given matrix reflecting their chemical properties or specific emission sources.     

Single- and dual-porosity modelling of flow in reclaimed mine soil cores with embedded lignitic fragments

Lignitic mine soils represent a typical two-scale dual-porosity medium consisting of a technogenic mixture of overburden sediments that include lignitic components as dust and as porous fragments embedded within a mostly coarse-textured matrix. Flow and transport processes in such soils are not sufficiently understood to predict the course of soil reclamation or of mine drainage. The objective of this contribution is to identify the most appropriate conceptual model for describing small-scale heterogeneity effects on flow on the basis of the physical structure of the system. Multistep flow experiments on soil cores are analyzed using either mobile–immobile or mobile–mobile type 1D dual-porosity models, and a 3D numerical model that considers a local-scale distribution of fragments. Simulations are compared with time series' of upward infiltration and matric potential heads measured at two depths using miniature tensiometers. The 3D and the 1D dual-permeability models yielded comparable results as long as pressure heads are in local equilibrium; however, could describe either the upward infiltration or the matric potential curves but not both at the same time. The mobile–immobile type dual-porosity model failed to describe the data. A simultaneous match with pressure heads and upward infiltration data could only be obtained with the 1D dual-permeability model (i.e., mobile–mobile) by assuming an additional restriction of the inter-domain water transfer. These results indicate that for unsaturated flow conditions at higher matric potential heads (i.e., here >− 40 hPa), water in a restricted part of the fragment domain must be more mobile as compared to water in the sandy matrix domain. Closer inspections of the pore system and first neutron radiographic imaging support the hypothesis that a more continuous pore region exists at these pressure heads in the vicinity of the lignitic fragments possibly formed by fragment contacts and a lignitic dust interface-region between the two domains. The results suggest that the small-scale structure is too complex as to be represented by weighted contributions of individual components alone.     

Unexplained gonad alterations in whitefish (Coregonus spp.) from Lake Thun, Switzerland: levels of persistent organic pollutants in different morphs

Since 2000, a surprisingly high number of macroscopical gonad alterations has been reported in whitefish (Coregonus spp.) from Lake Thun, Switzerland. This unique phenomenon is still unexplained and has received much public attention. As one possible trigger for these effects, the presence of persistent, bioaccumulative and toxic compounds acting as endocrine disruptors in the lake has been discussed. In this study, concentrations of selected persistent organic pollutants were examined in two morphs of whitefish from Lake Thun and their link to the observed abnormalities was investigated. Analyzed compound classes included polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins and dibenzofurans, polychlorinated naphthalenes, polybrominated diphenyl ethers and hexabromocyclododecanes. The target substances were identified in all samples and concentrations of the analyzed compounds were highly correlated among each other. These correlations show that the analyzed substances have the same distribution pattern throughout the lake and that uptake, accumulation and elimination processes are similar. Significant differences in contaminant levels within the samples existed between the two analyzed morphs of whitefish, most likely due to different age, food patterns and growth rate. No difference in contaminant levels was observed between fish with abnormal gonads and fish with normal gonads, suggesting no causal link between the investigated lipophilic organohalogen compounds present in fish and the observed gonad abnormalities in whitefish from Lake Thun. A comparison to existing data shows that concentrations in Lake Thun whitefish are at the lower bound of contaminant levels in whitefish from Swiss lakes or from European waters.     

Biological alkylation and colloid formation of selenium in methanogenic UASB reactors

Bioalkylation and colloid formation of selenium during selenate removal in upflow anaerobic sludge bed (UASB) bioreactors was investigated. The mesophilic (30 degrees C) UASB reactor (pH = 7.0) was operated for 175 d with lactate as electron donor at an organic loading rate of 2 g COD L(-1) d(-1) and a selenium loading rate of 3.16 mg Se L(-1) d(-1). Combining sequential filtration with ion chromatographic analysis for selenium oxyanions and solid phase micro extraction gas chromatography mass spectrometry (SPME-GC-MS) for alkylated selenium compounds allowed to entirely close the selenium mass balance in the liquid phase for most of the UASB operational runtime. Although selenate was removed to more than 98.6% from the liquid phase, a less efficient removal of dissolved selenium was observed due to the presence of dissolved alkylated selenium species (dimethylselenide and dimethyldiselenide) and colloidal selenium particles in the effluent. The alkylated and the colloidal fractions contributed up to 15 and 31%, respectively, to the dissolved selenium concentration. The size fractions of the colloidal dispersion were: 4 to 0.45 mum: up to 21%, 0.45 to 0.2 mum: up to 11%, and particles smaller than 0.2 mum: up to 8%. Particles of 4 to 0.45 mum were formed in the external settler, but did not settle. SEM-EDX analysis showed that microorganisms form these selenium containing colloidal particles extracellularly on their surface. Lowering the temperature by 10 degrees C for 6 h resulted in drastically reduced selenate removal efficiencies (after a delay of 1.5 d), accompanied by the temporary formation of an unknown, soluble, organic selenium species. This study shows that a careful process control is a prerequisite for selenium treatment in UASB bioreactors, as disturbances in the operational conditions induce elevated selenium effluent concentrations by alkylation and colloid formation.