Evaluation of protective effects of sulforaphane on DNA damage caused by exposure to low levels of pesticide mixture using comet assay

The objective of the study was to evaluate the potential risk of DNA damage due to exposure to a mixture of the most widely used pesticides, namely endosulfan, chlorpyriphos and thiram at an environmentally relevant concentration (5 μM each) and the DNA protective capacity of sulforaphane (SFN) (10–30 μg/mL). DNA damage in human lymphocytes was ascertained with Single Cell Gel Electrophoresis (SCGE), also called Comet Assay. For positive control, H₂O₂ at 100 mM was used. The pesticide mixture produced DNA damage at the concentration used in the lymphocytes. SFN was able to offer a statistically significant (P < 0.01), concentration-dependant protection to DNA damage between 10–20 μg/mL in both the pre-incubation and co-incubation strategies. The results indicate that exposure to low levels of these pesticide mixtures can induce DNA damage, and the presence of SFN in diet may reduce the incidence of genetic damage, especially in farm workers. However, it is not clear whether SFN is involved in quenching of the free radicals generated by the pesticide mixture or it is involved in DNA repair mechanism.     

Effect of white African mineral hair dye on the activities of phosphatases and malondialdehyde level in selected tissues of albino rats

The effect of white African mineral dye Yombofita (YF) on the activities of alkaline phosphatase (ALP), acid phosphatase (ACP) and malondialdehyde (MDA) levels in the skin, liver, kidney and serum of albino rats was investigated. The chemical analysis of the dye was first carried out using solubility test, pH determination and X-ray fluorescence (XRF) elemental analysis. Six different concentrations (0.05, 0.15, 0.25, 0.5, 0.75 and 1.00%) of the dye were prepared using hydrogen peroxide (30 volume) as solvent. A total of 80 albino rats (Rattus norvegicus) were used for the study. The rats were divided into 8 groups of 10 each and were maintained on commercial feed for the period of the experiment i.e. 30 days. In group 1, the control group, the animals were applied distilled water on their heads, whereas in group 2 the vehicle i.e. hydrogen peroxide was applied. In groups 3 to 8 various concentrations of YF (white) dye ranging from 0.05, 0.15, 0.25, 0.5, 0.75 to 1.00% was applied respectively. At the end of the experiment, blood samples were collected and portions of the selected tissues were excised for the determination of ALP and ACP activities. The MDA level was also determined in the skin of experimental animals. The results revealed a significant decrease (p?p?相似文献   

Emergy as a tool for Ecodesign: evaluating materials selection for beverage packages in Brazil

The life of a product begins with the initial product design concepts; the costs and potential impacts of a product are heavily influenced by the final design, the production processes, the economic and environmental costs of all raw materials. Additionally, both of these factors are very much affected by how the products are managed during and after consumer usage. Thus, there is an urgent need for a tool to facilitate the integration and assessment of environmental and economic demands into the product planning and development processes. The introduction of environmental accounting based on emergy as a tool to assist in product design is proposed. This complementary tool may be inserted into the conventional design methodology to facilitate in the selection of materials and processes as well as in the actual design of the products. To illustrate the application of the proposed method for material selection, PET (polyethylene terephthalate) bottles and aluminum cans for beverage packaging are compared. Despite the exceptional condition of aluminum recycling in Brazil, results show that the best option for beverage packages is the PET bottles.     

Preparing future engineers for challenges of the 21st century: Sustainable engineering

The field of engineering is changing rapidly as the growing global population puts added demands on the earth's resources: engineering decisions must now account for limitations in materials and energy as well as the need to reduce discharges of wastes. This means educators must revise courses and curricula so engineering graduates are prepared for the new challenges as practicing engineers. The Center for Sustainable Engineering has been established to help faculty members accommodate such changes through workshops and new educational materials, including a free access website with peer-reviewed materials.     

Molecular prenatal diagnosis: the impact of modern technologies

Originally prenatal diagnosis was confined to the diagnosis of metabolic disorders and depended on assaying enzyme levels in amniotic fluid. With the development of recombinant DNA technology, molecular diagnosis became possible for some genetic conditions late in the 1970s. Here we briefly review the history of molecular prenatal diagnostic testing, using Duchenne muscular dystrophy as an example, and describe how over the last 30 years we have moved from offering testing to a few affected individuals using techniques, such as Southern blotting to identify deletions, to more rapid and accurate PCR-based testing which identifies the precise change in dystrophin for a greater number of families. We discuss the potential for safer, earlier prenatal genetic diagnosis using cell free fetal DNA in maternal blood before concluding by speculating on how more recent techniques, such as next generation sequencing, might further impact on the potential for molecular prenatal testing. Progress is not without its challenges, and as cytogenetics and molecular genetics begin to unite into one, we foresee the main challenge will not be in identifying the genetic change, but rather in interpreting its significance, particularly in the prenatal setting where we frequently have no phenotype on which to base interpretation. Copyright © 2010 John Wiley & Sons, Ltd.     

Modeling the heat transfer in acetylene cylinders during and after the exposure to fire

In this paper two different approaches for predicting the heating-up of an acetylene cylinder involved in a fire and the afterward cooling with water are presented. In the simulations polynomial functions were used to describe the temperature dependency of the thermal properties of the cylinder interior, which is a complex system composed by a solid porous material, a solvent (typically acetone) and acetylene dissolved in it. Model equations covered heat conduction in the cylinder interior and at its walls. In the first approach the cylinder surroundings were simulated as a further domain constituted by CO₂, during the fire exposure, and for water, during the cooling. In this domain the coupled heat transfer (convection and conduction) and the momentum equation (Navier–Stokes) were solved. In the second approach no further domain was considered but boundary conditions were set directly on the cylinder walls. Results of the calculations performed with both approaches are presented. This work could prove helpful in predicting to which extent the interior of an acetylene cylinder exposed to fire reaches temperatures capable of initiating the decomposition of acetylene and to determine how long a water cooling should be applied, so that the system is brought again under non-critical conditions.     

Food remains in Confuciusornis sanctus suggest a fish diet

Despite hundreds of excellent fossils of Confuciusornis, the most abundant group of birds in the Early Cretaceous, ‘Jehol Biota’ in China, there is yet no indication of the food choice of these birds. Here, we describe fish remains preserved in the alimentary system of a specimen of Confuciusornis sanctus from the Jiufotang Formation. This find is about five million years younger than all previously published confuciusornithid birds from the Yixian Formation. Although it is unknown how common fish was in the diet of Confuciusornis, the find does not support previous hypotheses that it fed on plants or grain.     

A moving target—incorporating knowledge of the spatial ecology of fish into the assessment and management of freshwater fish populations

Freshwater fish move vertically and horizontally through the aquatic landscape for a variety of reasons, such as to find and exploit patchy resources or to locate essential habitats (e.g., for spawning). Inherent challenges exist with the assessment of fish populations because they are moving targets. We submit that quantifying and describing the spatial ecology of fish and their habitat is an important component of freshwater fishery assessment and management. With a growing number of tools available for studying the spatial ecology of fishes (e.g., telemetry, population genetics, hydroacoustics, otolith microchemistry, stable isotope analysis), new knowledge can now be generated and incorporated into biological assessment and fishery management. For example, knowing when, where, and how to deploy assessment gears is essential to inform, refine, or calibrate assessment protocols. Such information is also useful for quantifying or avoiding bycatch of imperiled species. Knowledge of habitat connectivity and usage can identify critically important migration corridors and habitats and can be used to improve our understanding of variables that influence spatial structuring of fish populations. Similarly, demographic processes are partly driven by the behavior of fish and mediated by environmental drivers. Information on these processes is critical to the development and application of realistic population dynamics models. Collectively, biological assessment, when informed by knowledge of spatial ecology, can provide managers with the ability to understand how and when fish and their habitats may be exposed to different threats. Naturally, this knowledge helps to better evaluate or develop strategies to protect the long-term viability of fishery production. Failure to understand the spatial ecology of fishes and to incorporate spatiotemporal data can bias population assessments and forecasts and potentially lead to ineffective or counterproductive management actions.     

Atrazine and Alachlor Inputs to Surface and Ground Waters in Irrigated Corn Cultivation Areas of Castilla-Leon Region, Spain

The inputs of atrazine and alachlor herbicides to surface and ground waters from irrigated areas dedicated to corn cultivation in the Castilla-León (C-L) region (Spain) as related to the application of both herbicides were studied. Enzyme-linked immunosorbent assays (ELISA) were used for monitoring the atrazine and alachlor concentrations in 98 water samples taken from these areas. Seventy-nine of the samples were of ground waters and 19 were of surface waters. The concentration ranges of the herbicides detected in the study period (October 1997–October 1998) were 0.04–25.3 g L^–1 in the surface waters and 0.04–3.45 g L^–1 in the ground waters for atrazine, and 0.06–31.9 g L^–1 in the surface waters and 0.05–4.85 g L^–1 in the ground waters in the case of alachlor. The highly significant correlation observed between the concentrations of both herbicides in the surface waters (r = 0.89, p < 0.001) pointed to a parallel transport of atrazine and alachlor to these waters. A study was made of the temporal evolution of the concentrations of both herbicides, and it was found a maximum recharge of atrazine in the ground waters for April 1998 and of alachlor in October 1997 and October 1998. The temporal evolution of the concentrations of both herbicides in surface waters was parallel. The highly significant correlations observed between atrazine concentrations determined by ELISA and by HPLC (r = 0.92, p < 0.001) and between alachlor concentrations also determined by both methods (r = 0.96, p < 0.001) confirmed the usefulness of ELISA for monitoring both herbicides in an elevated number of samples. Using HPLC, the presence in some waters of the alachlor ethanesulfonate (ESA) metabolite was found at a concentration range of 0.52–4.01 g L^–1. However the interference of ESA in the determination of alachlor by ELISA was negligible. The inputs of atrazine and alachlor to waters found in this study, especially the inputs to ground waters, could pose a risk for human health considering that some waters, though sporadically, are even used for human consumption.