Scenario study for a regional low-carbon society

Japan should undertake drastic greenhouse gas (GHG) emission reductions by the middle of this century in order to mitigate climate change problems. Municipalities should design and execute scenarios toward a low-carbon society suited to their respective regions. This study describes long-term future visions developed for Shiga Prefecture targeting CO₂ emission reductions of 30–50% by 2030, and presents scenarios to attain these targets, which are achievable with mild economic growth. For targets over a 30% reduction, region-specific measures including land-use reform and citizen behavioral changes are necessary. Compared with other regions in Japan, Shiga should give priority to a modal shift in transport, efficiency improvements in industry, and photovoltaic energy generation.     

Regimes of human and climate impacts on coastal changes in Vietnam

Vietnam is a tropical to subtropical country located on the eastern Asian coast where the Red (Song Hong) and Mekong rivers discharge into the sea. The catchments of these two transboundary rivers cover parts of six countries, and their water and sediment discharges greatly influence the coastal seas of Vietnam. The impact of human activities include changes in the supply and distribution of water, sediments, and nutrients; changes in the relationships and balance among dynamically interacting factors and processes; and changes in the quality of the coastal and marine environments due to the increased use and accumulation of pollutants and the loss of habitats. These impacts have resulted in increasing unpredictability and severity of coastal problems such as floods, erosion, sedimentation, and saltwater intrusion; environmental pollution; and the degradation of ecosystems, with accompanying decrease in biodiversity and fishery productivity.     

A hybrid fenton oxidation-microbial treatment for soil highly contaminated with benz(a)anthracene

In order to mitigate the strong microbial resistance of benz(a)anthracene [B(a)A] in soil, a hybrid treatment of Fenton oxidation followed microbial culture was carried out. Based on optimal Fenton oxidation, i.e., 1.0 ml of ethanol, 0.2 ml of 0.5 M Fe²⁺, and 0.3 ml of 30% H₂O₂ per 1 g of 500 mg B(a)A/kg soil, about 43% of B(a)A-7,12-dione was generated during oxidation of 97% B(a)A. When the comparative biodegradability between B(a)A-contaminated soil and B(a)A-contaminated soil after Fenton oxidation was examined, it was found that 98% of B(a)A-7,12-dione degraded after 63 d in comparison with only 12% of B(a)A over the same period; results demonstrating that Fenton oxidation enhances biodegradability of B(a)A through B(a)A-7,12-dione.     

Persistence of Viruses by qPCR Downstream of Three Effluent-Dominated Rivers in the Western United States

This study was designed to determine the quantitative polymerase chain reaction (qPCR) signal persistence of viruses in three effluent-dominated streams. Samples were collected from the effluent outfall of three wastewater treatment plants in the Western United States and downstream at different locations. All samples were tested for the presence of pepper mild mottle virus (PMMoV), adenoviruses, norovirus GI and GII, Aichi virus, and enteroviruses using qPCR. PMMoV was detected most frequently in 54/57 (94.7%) samples, followed by adenoviruses which was detected in 21/57 (36.8%) samples. PMMoV was detected at all locations downstream and up to 32 km from the discharge point. This study demonstrated that the detection signal of PMMoV was able to persist in wastewater discharges to a greater degree than human enteric viruses in effluent-dominated rivers.     

Presumed decomposition pathway of pentachlorophenol through atomic charge calculation and photodecomposition experiments

Batch photodegradation of pentachlorophenol (PCP) was conducted with ultraviolet irradiation. The main intermediates were identified as 2,3,5,6-tetrachlorophenol, 2,3,4,6-tetrachlorophenol and 2,5-dichlorophenol. Based on the density functional theory, atomic charge values were applied to reveal the photodegradation pathway. A comparison of the results of the experiment confirms that PCP molecules are dechlorinated in the descending order of their atomic charge values. From these results, it appears that determining the atomic charge values of organohalogen compounds is a promising method for predicting the dechlorination position in photodegradation.     

Photodegradation of hexachlorobenzene and theoretical prediction of its degradation pathways using quantum chemical calculation

Experimentally determined photodegradation pathways of hexachlorobenzene (HCB), a chlorinated aromatic compound, in hexane, 2-propanol (IPA), and methanol were compared with those predicted by quantum chemical calculation based on density functional theory (DFT), and the adequacy of the prediction method was evaluated. The experimental main degradation pathways of HCB were virtually the same for the three solvents and also agreed with the predicted main degradation pathways. In the DFT method, the main degradation product was the dechlorinated benzene at the position where the C-Cl bond was predicted to have the lowest bond dissociation energy. This result suggested that the photodechlorination pathways of chlorinated aromatic compounds could be predicted by comparing the bond dissociation energies calculated with the DFT method.     

Removal of PCDD/Fs from contaminated sediment and released effluent gas by charcoal in a proposed cost-effective thermal treatment process

A novel cost-effective thermal treatment technology has been proposed for the removal of PCDD/Fs from contaminated sediment and released effluent gas using charcoal as both an adsorbent and a thermal source. When a reactor was used for thermal treatment, the PCDD/Fs removal efficiency exceeded 98% from the sediment at the three different air superficial velocities employed in this study. The total PCDD/F international toxic equivalent (I-TEQ) contents, both in the treated sediments and effluent gas, were below the Japanese emission standard limit. Analysis of the PCDD/F contents in different fractions showed that large quantities of PCDDs but not PCDFs were evaporated from the sediment and adsorbed in the moist sediment column. This difference was attributed to the formation of PCDDs from pentachlorophenol (PCP) during the cooling process following the thermal treatment process in the reactor. This proposed thermal process provides a promising alternative to the conventional methods.     

Study on dechlorination technology for municipal waste plastics containing polyvinyl chloride and polyethylene terephthalate

It is necessary to remove chlorine efficiently from municipal waste plastics (MWP) that contain polyvinyl chloride (PVC) and other plastics containing chlorine. In this article we consider thermal degradation liquefaction technology. In Japan, the chlorine content of reclamation oil products must be kept below 100 ppm owing to the quality standard for pyrolysis oil. Liquefaction dechlorination technology for MWP is still an important issue to study. The twin-screw extruder that has been developed as dechlorination technology for blast furnaces and coke ovens has a shorter residence time for dechlorination than other dechlorination technologies. In this article, we used a single-screw extruder for the dechlorination process because it also has a short residence time. Experiments on the dechlorination process were carried out by using a single-screw extruder to assess its dechlorination performance. Practical use of the single-screw was demonstrated by the operation of a commercial oil reclamation plant operated by Sapporo Plastic Recycle Co., Ltd. (SPR). Moreover, an investigation of cascade recycling was carried out in 2008 in which material recycle wastes were mixed with MWP and processed by chemical recycling (liquefaction). It was demonstrated that cascade recycling is an efficient recycling combination and contributes to local feedstock recycling. However, it was shown that MR wastes affect the quality of the reclamation oil when they make up more than 40% of the feed mix. If the quantity of MR wastes is kept below 40%, the reclamation oil is able to meet the quality standard. The SPR plant can be operated safely and in a stable manner.