Estimating travel time of recharge water through a deep vadose zone using a transfer function model

We estimate the travel time of percolating water through a deep vadose zone at the regional scale using a transfer function model and a physical based conceptual flow model (Hydrus-1D), thereby exploiting the time series of precipitation, actual evapotranspiration and groundwater piezometry and generic vadose zone data. With the transfer function model we observe a high variability of estimated travel time varying from 0.9 to 3.1 years, corresponding to estimated vertical water flux velocities varying from 6.6 to 28.0 m/year. These results were compared with the travel time estimated from the physical based conceptual model. With the flow model, estimated travel time varies between 4.7 and 15.5 years, corresponding to water flux velocities varying between 1.7 and 4.1 m/year. The estimated travel time calculated with the flow model were therefore about five times larger than those estimated with the transfer function model. This could be explained by the fact that the transfer function model considers heterogeneous recharge from the vadose zone as well as from the vicinity of the piezometer through the so called “pushing effect”. In addition, the flow model requires various hydrogeological and hydrodynamic parameters which were estimated using generic parametrisation approaches, that are largely affected by uncertainty and may not reflect the local conditions. In contrast, the transfer function model only exploits available measurable time series and has the advantage of being site-specific.     

Emerging prion disease drives host selection in a wildlife population

Infectious diseases are increasingly recognized as an important force driving population dynamics, conservation biology, and natural selection in wildlife populations. Infectious agents have been implicated in the decline of small or endangered populations and may act to constrain population size, distribution, growth rates, or migration patterns. Further, diseases may provide selective pressures that shape the genetic diversity of populations or species. Thus, understanding disease dynamics and selective pressures from pathogens is crucial to understanding population processes, managing wildlife diseases, and conserving biological diversity. There is ample evidence that variation in the prion protein gene (PRNP) impacts host susceptibility to prion diseases. Still, little is known about how genetic differences might influence natural selection within wildlife populations. Here we link genetic variation with differential susceptibility of white-tailed deer to chronic wasting disease (CWD), with implications for fitness and disease-driven genetic selection. We developed a single nucleotide polymorphism (SNP) assay to efficiently genotype deer at the locus of interest (in the 96th codon of the PRNP gene). Then, using a Bayesian modeling approach, we found that the more susceptible genotype had over four times greater risk of CWD infection; and, once infected, deer with the resistant genotype survived 49% longer (8.25 more months). We used these epidemiological parameters in a multi-stage population matrix model to evaluate relative fitness based on genotype-specific population growth rates. The differences in disease infection and mortality rates allowed genetically resistant deer to achieve higher population growth and obtain a long-term fitness advantage, which translated into a selection coefficient of over 1% favoring the CWD-resistant genotype. This selective pressure suggests that the resistant allele could become dominant in the population within an evolutionarily short time frame. Our work provides a rare example of a quantifiable disease-driven selection process in a wildlife population, demonstrating the potential for infectious diseases to alter host populations. This will have direct bearing on the epidemiology, dynamics, and future trends in CWD transmission and spread. Understanding genotype-specific epidemiology will improve predictive models and inform management strategies for CWD-affected cervid populations.     

The effect of temperature and solar radiations on volatilisation, mineralisation and degradation of [14C]-DDT in soil

The influence of temperature and solar radiations on the rapid dissipation of DDT from tropical soils was studied by quantifying volatilisation, mineralisation, binding and degradation of ((14)C)-p,p'-DDT in a sandy loam soil. The bulk of the DDT loss occurred by volatilisation, which increased fivefold when the temperature changed from 15 to 45 degrees C. Degradation of DDT to DDE was also faster at higher temperatures. Mineralisation of DDT, though minimal, increased with temperature and time. Higher temperatures also enhanced binding of DDT to soil. Flooding the treated soil further increased volatilisation and degradation, although mineralisation was greatly reduced. Exposure of flooded and unflooded soils treated with DDT to sunlight in quartz, glass and dark tubes for 42 days during summer resulted in significant volatile losses. Volatilisation in the quartz tubes was nearly twice as great as that in the dark tubes The volatilised organics from the quartz tubes contained larger amounts of p,p'-DDE than the glass and dark tubes. Higher rates of volatilisation and degradation were found in flooded soils. Also significant quantities of p,p'-DDD were detected in addition to DDE. The data clearly show that volatilisation is the major mechanism for the rapid dissipation of DDT from Indian soils.     

Evaluation of leachate recirculation on nitrous oxide production in the Likang Landfill,China

Landfill leachate recirculation is efficient in reducing the leachate quantity handled by a leachate treatment plant. However, after land application of leachate, nitrification and denitrification of the ammoniacal N becomes possible and the greenhouse gas nitrous oxide (N2O) is produced. Lack of information on the effects of leachate recirculation on N2O production led to a field study being conducted in the Likang Landfill (Guangzhou, China) where leachate recirculation had been practiced for 8 yr. Monthly productions and fluxes of N2O from leachate and soil were studied from June to November 2000. Environmental and chemical factors regulating N2O production were also accessed. An impermeable top liner was not used at this site; municipal solid waste was simply covered by inert soil and compacted by bulldozers. A high N2O emission rate (113 mg m-2 h-1) was detected from a leachate pond purposely formed on topsoil within the landfill boundary after leachate irrigation. A high N2O level (1.09 micrograms L-1) was detected in a gas sample emitted from topsoil 1 m from the leachate pond. Nitrous oxide production from denitrification in leachate-contaminated soil was at least 20 times higher than that from nitrification based on laboratory incubation studies. The N2O levels emitted from leachate ponds were compared with figures reported for different ecosystems and showed that the results of the present study were 68.7 to 88.6 times higher. Leachate recirculation can be a cost-effective operation in reducing the volume of leachate to be treated in landfill. However, to reduce N2O flux, leachate should be applied to underground soil rather than being irrigated and allowed to flow on topsoil.     

Fate of polydimethylsilicone in biosolids-amended field plots

This research examined the fate of polydimethylsilicones (PDMS) in agricultural test plots amended with municipal biosolids. This 4 yr field study involved addition of 0, 15, and 100 Mg ha(-1) of municipal biosolids, which contained ambient concentrations of PDMS (1272 mg kg(-1) biosolids), to corn and soybean test plots. Soil samples collected at intermittent time intervals were analyzed for soil water, soil organic C, extractable PDMS and PDMS hydrolysis products. Above normal precipitation during the field study maintained soil water levels in excess of 100 g kg(-1) for most of the testing period of 1994-1998. Under these conditions half-lives for PDMS (based on field dissipation data) ranged from 876 to 1443 d. When biosolids amended soil samples were brought into the laboratory and subjected to more rapid drying, >80% of the PDMS was transformed to lower molecular weight hydrolysis products within 20 d. No difference in relative PDMS transformation rates were evident for soils that received PDMS in the form of a biosolids amendment or directly dosed to the soil (in the absence of biosolids) indicating little if any effect of direct PDMS-biosolids interactions on PDMS transformation rates. These results support that the overriding factor controlling the fate of PDMS in field soils is the soil moisture content.     

Evaluation of Optically Acquired Zooplankton Size-Spectrum Data as a Potential Tool for Assessment of Condition in the Great Lakes

An optical plankton counter (OPC) potentially provides an assessment tool for zooplankton condition in ecosystems that is rapid, economical, and spatially extensive. We collected zooplankton data with an OPC in 20 near-shore regions of 4 of the Laurentian Great Lakes. The zooplankton size information was used to compute mean size, biomass density, and size-spectra parameters for each location. The resulting metrics were analyzed for their ability to discriminate among the Great Lakes. Biomass density provided discrimination among lakes, as did several parameters describing spectra shape and distribution. A proposed zooplankton indicator, mean size (determined with OPC measurements in this study), was found to provide discrimination among lakes. Size-spectra-related parameters added increased ability to discriminate in conjunction with the biomass density (or mean size) metric. A discriminant function analysis of the multiple metrics (mean size, biomass density, and distribution parameters) suggests that a multi metric size-based approach might be used to classify communities among lakes improving a mean-size metric. The feasibility OPCs and size-based metrics for zooplankton assessment was found to have potential for further development as assessment tools for the biological condition of zooplankton communities in the Great Lakes.     

Chemical and physical properties of dry flue gas desulfurization products

Beneficial and environmentally safe recycling of flue gas desulfurization (FGD) products requires detailed knowledge of their chemical and physical properties. We analyzed 59 dry FGD samples collected from 13 locations representing four major FGD scrubbing technologies. The chemistry of all samples was dominated by Ca, S, Al, Fe, and Si and strong preferential partitioning into the acid insoluble residue (i.e., coal ash residue) was observed for Al, Ba, Be, Cr, Fe, Li, K, Pb, Si, and V. Sulfur, Ca, and Mg occurred primarily in water- or acid-soluble forms associated with the sorbents or scrubber reaction products. Deionized water leachates (American Society for Testing and Materials [ASTM] method) and dilute acetic acid leachates (toxicity characteristic leaching procedure [TCLP] method) had mean pH values of >11.2 and high mean concentrations of S primarily as SO(2-)4 and Ca. Concentrations of Ag, As, Ba, Cd, Cr, Hg, Pb, and Se (except for ASTM Se in two samples) were below drinking water standards in both ASTM and TCLP leachates. Total toxicity equivalents (TEQ) of dioxins, for two FGD products used for mine reclamation, were 0.48 and 0.53 ng kg(-1). This was similar to the background level of the mine spoil (0.57 ng kg(-1)). The FGD materials were mostly uniform in particle size. Specific surface area (m2 g(-1)) was related to particle size and varied from 1.3 for bed ash to 9.5 for spray dryer material. Many of the chemical and physical properties of these FGD samples were associated with the quality of the coal rather than the combustion and SO2 scrubbing processes used.     

Work-home conflict among nurses and engineers: Mediating the impact of role stress on burnout and satisfaction at work

Using structural equation modeling, this paper compares a more traditional, unmediated model of work-based role stress and its consequences on job satisfaction and burnout to two models in which the role stress-affective work outcome relationship is mediated (partially and completely) by work-home conflict across two samples of public sector professionals: engineers and nurses. The findings indicate that a model in which role conflict and overload have both direct and indirect effects—via work-home conflict—on job burnout and satisfaction (‘Partial Mediation’ model) achieves a better overall ‘fit’ than two alternative models. Furthermore, the findings suggest that while the two groups perceive many aspects of the work-home relationship differently, for both groups, work-based role conflict is an important antecedent of work-home conflict, and increased burnout an important direct consequence of work-home conflict. Finally, on the basis of the findings, the authors conclude that perspectives which view the work and non-work realms as independent must be reconsidered, and that the nature of the work-home relationship may, to a great extent, be contingent upon the way different occupational groups perceive their work situations.     

Evaluating Ecosystem Management Capabilities at the Local Level in Florida: Identifying Policy Gaps Using Geographic Information Systems

Because ecosystem approaches to management adhere to ecological systems rather than human-defined boundaries, collaboration across jurisdiction, agencies, and land ownership is often necessary to achieve effective management of transboundary resources. Local natural resource and land use planners increasingly recognize that while ecosystem management requires looking beyond specific jurisdictions and focusing on broad spatial scales, the approach will partly be implemented at the local level with the coordination of local policies across larger landscapes. This article evaluates the collective capabilities of local jurisdictions to manage large transboundary ecological systems in Florida. Specifically, it combines plan evaluation with geographic information systems (GIS) techniques to map, measure, and analyze the existing mosaic of management across selected ecosystems in the southern portion of the State. Visual and statistical results indicate significant gaps in the management framework of southern Florida that, if filled, could achieve a greater level of consistency and more complete coverage of ecosystem management policies. Based on the spatial distribution of 58 ecosystem management indicators, notable gaps persist in the southwest coast, southeast coast, and central Everglades ecosystems, particularly for wildlife corridors and collaboration with neighboring jurisdictions. We also test for spatial autocorrelation of ecosystem planning scores and find that local jurisdictions with strong ecosystem management capabilities tend to cluster within specific ecosystems. Based on the findings, we make recommendations on how and where local plans can be strengthened to more effectively attain the objectives of ecosystem approaches to management.     

Economic comparison of recycling over-ordered fresh concrete: A case study approach

Recycling of construction material helps save the limited landfill space. Among various types of materials, concrete waste accounts of about 50% of the total waste generation. Current off-site practices for ready mixed concrete batching plant generate a significant quantity of fresh concrete waste through over-order from construction sites. The use of concrete reclaimer is one of the methods to reclaim these concrete wastes, which separates coarse aggregate, sand and cement from fresh concrete. Although there are some concrete producers in Hong Kong providing concrete reclaimers in their plants, they are only used to flush and dilute the cement slurry from the concrete, which will still be ultimately send all to dumping areas. The reluctance of most concrete producers in reclaiming aggregate from the concrete waste is due to its high cost of treatment and lack of space around the plant. Therefore, this paper puts forth a scheme of economical considerations in recycling over-ordered concrete by concrete reclaimer. A comparative study on costs and benefits between the current practices and the proposed recycling plan is examined. The study shows that the costs of the current practices in dumping over-ordered fresh concrete waste to landfill areas are double that of the proposed aggregate recycling plan. Therefore, the adoption of concrete reclaimer in recycling the over-ordered fresh concrete can provide a cost-effective method for the construction industry and help saving the environment.