Light acclimation states of phytoplankton in the Southern Ocean, determined using photosynthetic pigment distribution

In high-latitude waters such as the Southern Ocean, the primary production of phytoplankton supports the ecosystem. To understand the photo-acclimation strategy of such phytoplankton within cold environments, the vertical distribution profile of photosynthetic pigments was analyzed in the Southern Ocean. Samples were taken along 110°E during the austral summer, and along 150°E and around the edge of the seasonal sea ice of the Antarctic Continent during the austral autumn. Pigment extraction methods were optimized for these samples. The standing crop of chlorophyll a was larger in the region along the edge of the seasonal sea ice than at sampling stations in open ocean areas. Chlorophyll concentration seemed to be dependent on the formation of thermo- and haloclines along the edge of the seasonal sea ice, but not in the open ocean where such clines are less pronounced. The marker pigments fucoxanthin and/or 19′-hexanoyloxyfucoxanthin were dominant at most sampling stations throughout the water column, while other marker pigments such as alloxanthin were quite low. This indicated that diatoms and/or haptophytes were the major phytoplankton in this area. Comparison of the relative ratio of fucoxanthin with that of 19′-hexanoyloxyfucoxanthin allowed some stations to be characterized as either diatom-dominant or haptophyte-dominant. The relative ratio of xanthophyll-cycle pigments (diadinoxanthin plus diatoxanthin) to chlorophyll a was high in surface waters and decreased gradually with depth. This suggests that near the ice edge during summer in the Southern Ocean, both diatoms and haptophytes acclimate to their light environments to protect their photosystems under high-light conditions.     

Reproductive effects and bioconcentration of 4-nonylphenol in medaka fish (Oryzias latipes)

The objective of this study was to investigate the reproductive success (fertility and fecundity) of medaka (Oryzias latipes) exposed to 4-nonylphenol (4-NP) in water and the viability of their F(1) offspring. In addition, we measured the bioconcentration of 4-NP in eggs. After a 21-d exposure to 100microg/l 4-NP, medaka showed reduced egg production and fertility. Hepatic vitellogenin levels were increased significantly in males treated with 10, 50 and 100microg/l of 4-NP. In the F(1) generations, the hatchability and time to hatching of embryos in the 100microg/l treatment group were adversely affected, and 2-7microg 4-NP/g egg was found in spawned eggs (the bioconcentration factor: 30-100). These results indicate that (1) 4-NP adversely affected the reproduction (fecundity and fertility) of adult medaka, (2) 4-NP accumulated in eggs through maternal transfer and (3) these levels of 4-NP were associated with adverse effects in the F(1) offspring.     

Oyster Contamination with Human Noroviruses Impacted by Urban Drainage and Seasonal Flooding in Vietnam

This study investigated the level of norovirus contamination in oysters collected at a lagoon receiving urban drainage from Hue City for 17 months (August 2015–December 2016). We also investigated the genetic diversity of norovirus GI and GII in oyster and wastewater samples by using pyrosequencing to evaluate the effect of urban drainage on norovirus contamination of oysters. A total of 34 oyster samples were collected at two sampling sites (stations A and B) in a lagoon. Norovirus GI was more frequently detected than GII (positive rate 79 vs. 41%). Maximum concentrations of GI and GII were 2.4 × 10⁵ and 2.3 × 10⁴ copies/g, respectively. Co-contamination with GI and GII was observed in 35% of samples. Norovirus GII concentration was higher at station A in the flood season than in the dry season (P = 0.04, Wilcoxon signed-rank test). Six genotypes (GI.2, GI.3, GI.5, GII.2, GII.3, and GII.4) were identified in both wastewater and oyster samples, and genetically similar or identical sequences were obtained from the two types of samples. These observations suggest that urban drainage and seasonal flooding contribute to norovirus contamination of oysters in the study area.     

Bacterial communities in different locations, seasons and segments of a dairy wastewater treatment system consisting of six segments

A dairy wastewater treatment system composed of the 1st segment (no aeration) equipped with a facility for the destruction of milk fat particles, four successive aerobic treatment segments with activated sludge and a final sludge settlement segment was developed. The activated sludge is circulated through the six segments by settling sediments (activated sludge) in the 6th segment and sending the sediments beck to the 1st and 2nd segments. Microbiota was examined using samples from the non-aerated 1st and aerated 2nd segments obtained from two farms using the same system in summer or winter. Principal component analysis showed that the change in microbiota from the 1st to 2nd segments concomitant with effective wastewater treatment is affected by the concentrations of activated sludge and organic matter (biological oxygen demand [BOD]), and dissolved oxygen (DO) content. Microbiota from five segments (1st and four successive aerobic segments) in one location was also examined. Although the activated sludge is circulating throughout all the segments, microbiota fluctuation was observed. The observed successive changes in microbiota reflected the changes in the concentrations of organic matter and other physicochemical conditions (such as DO), suggesting that the microbiota is flexibly changeable depending on the environmental condition in the segments. The genera Dechloromonas, Zoogloea and Leptothrix are frequently observed in this wastewater treatment system throughout the analyses of microbiota in this study.     

Energy reduction of a submerged membrane bioreactor using a polytetrafluoroethylene (PTFE) hollow-fiber membrane

The fiber length and packing density of the PTFE membrane element were increased. The MBR was stably operated under an SAD^m of 0.13 m³·m^-2·hr^-1. Specific energy consumption was estimated to be less than 0.4 kWh·m^-3. In this study, we modified a polytetrafluoroethylene (PTFE) hollow-fiber membrane element used for submerged membrane bioreactors (MBRs) to reduce the energy consumption during MBR processes. The high mechanical strength of the PTFE membrane made it possible to increase the effective length of the membrane fiber from 2 to 3 m. In addition, the packing density was increased by 20% by optimizing the membrane element configuration. These modifications improve the efficiency of membrane cleaning associated with aeration. The target of specific energy consumption was less than 0.4 kWh·m^-3 in this study. The continuous operation of a pilot MBR treating real municipal wastewater revealed that the MBR utilizing the modified membrane element can be stably operated under a specific air demand per membrane surface area (SAD_m) of 0.13 m³·m^-2·hr^-1 when the daily-averaged membrane fluxes for the constant flow rate and flow rate fluctuating modes of operation were set to 0.6 and 0.5 m³·m^-2·d^-1, respectively. The specific energy consumption under these operating conditions was estimated to be less than 0.37 kWh·m^-3. These results strongly suggest that operating an MBR equipped with the modified membrane element with a specific energy consumption of less than 0.4 kWh·m^-3 is highly possible.     

Activity and emission inventory of open waste burning at the household level in developing countries: a case study of Semarang City

Journal of Material Cycles and Waste Management - In this study, total burned household waste and the potential emissions released from waste burning in Semarang City, Indonesia, were estimated....     

Investigation of 1,4-dioxane originating from incineration residues produced by incineration of municipal solid waste

As a groundwater contaminant, 1,4-dioxane is of considerable concern because of its toxicity, refractory nature to degradation, and rapid migration within an aquifer. Although landfill leachate has been reported to contain significant levels of 1,4-dioxane, the origin of 1,4-dioxane in leachate has not been clarified until now. In this study, the origins of 1,4-dioxane in landfill leachate were investigated at 38 landfill sites and three incineration plants in Japan. Extremely high levels of 1,4-dioxane 89 and 340 microg l(-1), were detected in leachate from two of the landfill sites sampled. Assessments of leachate and measurement of 1,4-dioxane in incineration residues revealed the most likely source of 1,4-dioxane in the leachate to be the fly ash produced by municipal solid waste incinerators. Effective removal of 1,4-dioxane in leachate from fly ash was achieved using heating dechlorination systems. Rapid leaching of 1,4-dioxane observed from fly ash in a sequential batch extraction indicated that the incorporation of a waste washing process could also be effective for the removal of 1,4-dioxane in fly ash.     

Evaluation of electronic components in life cycle assessment

Life cycle assessment (LCA), a quantitative method for evaluating the total environmental impact of a product, from the materials in its manufacture to its final disposal, is playing an increasingly important role in manufacturing. When the LCA method is applied to a product containing many kinds of electronic components, there is a need for life cycle inventory (LCI) data on the components. This paper provides an original calculation of the LCI data for each electronic components industry. These data show the amount of input energy and emissions into the atmosphere per yen of production yield. It is demonstrated that the magnitude of the LCI data for each industry is essentially equal to that of the other industries. Furthermore, we conclude that the LCI data for all electronic components are roughly equivalent, making it possible to calculate the LCI data of any electronic component by simply multiplying the LCI data for the industry by the price of the component. Furthermore, after comparing the materials production stages with the component manufacturing stage in the calculation, it became clear that for several component industries the materials production stage could not be omitted from the calculation. Received: April 10, 1998 / Accepted: February 8, 1999     

Biodegradability,hydrolytic degradability,and builder performance in detergent formulations of partially dicarboxylated alginic acid

Partially dicarboxylated alginic acids with degree of dicarboxylations from 13 to 61 mol% were prepared and their biodegradability, hydrolytic degradability, and builder performances in detergent formulations were measured. Also, the correlations between biodegradability and hydrolytic degradability were examined with respect to the degree of dicarboxylation. The biodegradability of dicarboxylated alginic acid sodium salt (DCAa), evaluated by biochemical oxygen demand with activated sludge, depended on the degree of dicarboxylation. DCAa containing more than 75 mol% remaining uronide residues in the polymer chain showed excellent biodegradation. Hydrolytic degradation of DCAa depended on the degree of dicarboxylation and the pH of the incubation media. After 30-day incubation at 30°C at pH 4–6, a significant molecular weight reduction by hydrolytic degradation was observed for highly dicarboxylated alginic acid. DCAa with a high degree of dicarboxylation showed excellent builder performance in detergent formulations based on the detergency and calcium sequestration capacity.