Perception of people for the risk of Tianwan nuclear power plant

A questionnaire survey of residents’ risk perceptions related to Taiwan nuclear power plant in China was carried out to explore the determining factors that affect individual risk perception. This study proposed to pursue a more comprehensive understanding of factors that affected individual risk perception to nuclear power plants. Covariance structure analysis was conducted using risk perceptions of nuclear power as dependent variable and including interest and knowledge levels of nuclear power, acceptability, benefit perception, trust in nuclear power operation, and trust in government as independent variables. The use of the hypothesis of Elaboration likelihood model (ELM) was also proposed. The results showed that persons with higher levels of interest and knowledge of nuclear power had their own perceptions of risk closely associated with acceptability and potential benefits of nuclear power. In contrast, persons with no interest in and knowledge of nuclear power would have risk perceptions related to their trust in nuclear operation and the government, which partially supported the ELM hypothesis. All these results indicated that the government in China plays an important role in rational risk perceptions, and well-designed communication of risks will help the public to be involved in risk management and improve people’s rational acceptance of risk.     

Public perception of environmental issues across socioeconomic characteristics: A survey study inWujin,China

In developing countries, there is controversy over the correct perception regarding environmental and developmental issues. Few studies have examined the perception of low-income nationals in regards to social and environmental issues. This paper looks at the relationship between socio-demographic factors and the groups’ perceived priority regarding environmental and social issues in Wujin County. The results indicated that most residents, specifically the young, government employed and the urban community consider environmental issues to be serious, especially in relation to air pollution and water pollution. Furthermore, many residents feel it is important to rank environmental problems that are related to other social and economic issues, and that environmental protection must be set as a priority in Wujin County. Compared to social issues, environmental concern was greater among the young, government employed, and the urban community, because of their higher education and affluence. In addition, 66.2% of residents consider environmental protection to be more important than economic development. Thus, environmental protection must be set as a high priority in Wujin County, in order to face the many social and environmental challenges inherent in development.     

Nitrogen-retaining property of compost in an aerobic thermophilic composting reactor for the sanitary disposal of human feces

Aerobic composting is a method for the sanitary disposal of human feces as is used in bio-toilet systems. As the products of composting can be utilized as a fertilizer, it would be beneficial if the composting conditions could be more precisely controlled for the retention of fecal nitrogen as long as possible in the compost. In this study, batch experiments were conducted using a closed aerobic thermophilic composting reactor with sawdust as the bulk matrix to simulate the condition of a bio-toilet for the sanitary disposal of human feces. Attention was paid to the characteristics of nitrogen transformation. Under the controlled conditions of temperature at 60°C, moisture content at 60%,anda continuous air supply, more than 70% fecal organic removal was obtained, while merely 17% fecal nitrogen loss was observed over a two-week composting period. The nitrogen loss was found to occur mainly in the first 24 h with the rapid depletion of inorganic nitrogen but with an almost unchanged organic nitrogen content. The fecal NH₄-N which was the main component of the inorganic nitrogen ( > 90%) decreased rapidly in the first day, decreased at a slower rate over the following days, and finally disappeared entirely. The depletion of NH₄-N was accompanied by the accumulation of NH₃ gas in the ammonia absorber connected to the reactor. A mass balance between the exhausted NH₃ gas and the fecal NH₄-N content in the first 24 hours indicated that the conversion of ammonium into gaseous ammonia was the main reason for nitrogen loss. Thermophilic composting could be considered as a way to keep a high organic nitrogen content in the compost for better utilization as a fertilizer.     

Biosorption of Cr(III) from aqueous solution by freeze-dried activated sludge: Equilibrium,kinetic and thermodynamic studies

Batch biosorption experiments were conducted to remove Cr(III) from aqueous solutions using activated sludge from a sewage treatment plant. An investigation was conducted on the effects of the initial pH, contact time, temperature, and initial Cr(III) concentration in the biosorption process. The results revealed that the activated sludge exhibited the highest Cr(III) uptake capacity (120 mg·g⁻¹) at 45°C, initial pH of 4, and initial Cr(III) concentration of 100 mg·L⁻¹. The biosorption results obtained at various temperatures showed that the biosorption pattern accurately followed the Langmuir model. The calculated thermodynamic parameters, ΔG^o (−0.8– −4.58 kJ·mol⁻¹), ΔH^o (15.6–44.4 kJ·mol⁻¹), and ΔS^o (0.06–0.15 kJ·mol⁻¹·K⁻¹) clearly indicated that the biosorption process was feasible, spontaneous, endothermic, and physical. The pseudo first-order and second-order kinetic models were adopted to describe the experimental data, which revealed that the Cr(III) biosorption process conformed to the second-order rate expression and the biosorption rate constants decreased with increasing Cr(III) concentration. The analysis of the values of biosorption activation energy (E_a = −7 kJ·mol⁻¹) and the intra-particle diffusion model demonstrated that Cr(III) biosorption was film-diffusion-controlled.     

Impact of solids on biphasic biodegradation of phenanthrene in the presence of hydroxypropyl-<Emphasis Type="Italic">β</Emphasis>-cyclodextrin (HPCD)

The consequence of polycyclic aromatic hydrocarbons (PAHs) in the environment is of great concern. The hydrophobic properties of PAHs significantly impact phase distribution causing limited bioavailability. Enhanced biodegradation has been extensively carried out by surfactants and the redeployment effect was recognized. However, the quantitative relationship concerning the impact of solids was rarely reported. A batch of biphasic tests were carried out by introducing Mycobacterium vanbaalenii PYR-1 and hydroxypropyl-β-cyclodextrin (HPCD) into a mixture of phenanthrene solution and various glass beads (GB37-63, GB105-125, and GB350-500). The comparative results demonstrated that HPCD had little effect on microbial growth and was not degradable by bacterium. A model was proposed to describe the biodegradation process. The regression results indicated that the partition coefficient k _d (1.234, 0.726 and 0.448 L·g^?1) and the degradation rate k (0 mmol·L^?1: 0.055, 0.094, and 0.112; 20 mmol·L^?1: 0.126, 0.141, and 0.156; 40 mmol·L^?1: 0.141, 0.156 and 0.184 d^?1) were positively and negatively correlated with the calculated total surface area (TSA) of solids, respectively. Degradation enhanced in the presence of HPCD, and the enhancing factor f was calculated (20 mmol·L^?1: 15.16, 40.01, and 145.5; 40 mmol·L^?1: 13.29, 37.97, and 138.4), indicating that the impact of solids was significant for the enhancement of biodegradation.     

Development of pretreatment protocol for DNA extraction from biofilm attached to biologic activated carbon (BAC) granules

The biologic activated carbon (BAC) process is widely used in drinking water treatments. A comprehensive molecular analysis of the microbial community structure provides very helpful data to improve the reactor performance. However, the bottleneck of deoxyribonucleic acid (DNA) extraction from BAC attached biofilm has to be solved since the conventional procedure was unsuccessful due to firm biomass attachment and adsorption capacity of the BAC granules. In this study, five pretreatments were compared, and adding skim milk followed by ultrasonic vibration was proven to be the optimal choice. This protocol was further tested using the vertical BAC samples from the full-scale biofilter of Pinghu Water Plant. The results showed the DNA yielded a range of 40 μg·g^-1 BAC (dry weight) to over 100 μg·g^-1 BAC (dry weight), which were consistent with the biomass distribution. All results suggested that the final protocol could produce qualified genomic DNA as a template from the BAC filter for downstream molecular biology researches.     

Sorption of tetracycline to sediments and soils: assessing the roles of pH,the presence of cadmium and properties of sediments and soils

Batch sorption experiments were conducted to evaluate the sorption behavior of tetracycline (TC, H₃L) on sediments and soils in the presence and absence of cadmium (Cd), as affected by pH and properties of sediments and soils. The results indicated stronger nonlinearity and higher capacity of TC sorption on sediments than on soils. Sorption of TC also strongly depended on environmental factors and sediment/soil properties. Lower pH facilitated TC sorption through a cation exchange mechanism, which also took place at pH values above 5.5, where TC existed as a zwitterion (H₂L⁰) or anions (HL^- and L^2-). When pH was above 7, however, ligand-promoted dissolution of TC might occur due to TC weakening the Al-O bond of aluminum oxide and the Fe-O bond of iron oxide. Natural organic matter (NOM) plays a more important role in TC sorption than cation exchange capacity (CEC) and clay contents. The presence of Cd (II) increased TC sorption on both sediments and soils, which resulted from the decrease of equilibrium solution pH caused by Cd²⁺ exchange with H⁺ ions of sediment/soil surfaces. The increase of TC sorption was also related to the formation of TC-Cd complexes, where Cd²⁺ acted as a bridge between the sediment/soil and TC.     

Removal of high concentrations of polycyclic aromatic hydrocarbons from contaminated soil by biodiesel

Solubilizing experiments were carried out to evaluate the ability of biodiesel to remove polycyclic aromatic hydrocarbons (PAHs) from highly contaminated manufactured gas plant (MGP) and PAHs spiked soils with hydroxypropyl-β-cyclodextrin (HPCD) and tween 80 as comparisons. Biodiesel displayed the highest solubilities of phenanthrene (420.7 mg·L^-1), pyrene (541.0 mg·L^-1), and benzo(a)pyrene (436.3 mg·L^-1). These corresponded to several fold increases relative to 10% HPCD and tween 80. Biodiesel showed a good efficiency for PAH removal from the spiked and MGP soils for both low molecular weight and high molecular weight PAHs at high concentrations. Biodiesel was the best agent for PAH removal from the spiked soils as compared with HPCD and tween 80; as over 77.9% of individual PAH were removed by biodiesel. Tween 80 also showed comparable capability with biodiesel for PAH solubilization at a concentration of 10% for the spiked soils. Biodiesel solubilized a wider range of PAHs as compared to HPCD and tween 80 for the MPG soils. At PAH concentrations of 229.6 and 996.9 mg·kg^-1, biodiesel showed obvious advantage over the 10% HPCD and tween 80, because it removed higher than 80% of total PAH. In this study, a significant difference between PAH removals from the spiked and field MGP soils was observed; PAH removals from the MGP soil by HPCD and tween 80 were much lower than those from the spiked soil. These results demonstrate that the potential for utilizing biodiesel for remediation of highly PAH-contaminated soil has been established.     

Beurteilung des Ozonrisikos für die Waldregionen Bayerns am Beispiel des Jahres 2002 und des Extremtrockenjahres 2003 auf der Basis der externen Ozonexposition und der internen Ozonaufnahme

Background, aim, and scope Increasing background concentrations of ground-level tropospheric ozone and more frequent and prolonged summer drought incidences due to climate change are supposed to increase the stress on Bavarian forests. For such scenarios growth reduction and yield losses are predicted. Sustainable forest management in Bavaria aims to significantly increase the proportion of beech (Fagus sylvatica L.) because of its broad ecological amplitude. In our regional study different approaches for calculating ozone impact were used to estimate the risks for Bavarian forests in the average climatic, rather moist year 2002 and the extremely dry year 2003.Materials and methods Measurements were conducted for eleven forest ecosystem sites and two forest research sites representing typical Bavarian forest stands under different climatic conditions and situated in different altitudes. For risk assessment currently used approaches were applied either based on the calculation of the cumulative ozone exposure (external dose; MPOC maximal permitted ozone concentration; critical level AOT40_phen? accumulated ozone exposure over a threshold of 40 nl [O₃] l^–1, for the effective phenolgy of beech) or based on the calculation of the phytomedically relevant ozone flux into the stomata (internal dose, critical level AF_st>1,6, accumulated stomatal flux above a flux threshold of 1.6 nmol O₃?m^–2 PLA; PLA = projected leaf area). For calculations continuously recorded ozone concentrations and meteorological and phenological data from nearby rural open field background measuring stations from the national air pollution control and from forested sites were used. Additionally ozone induced leaf symptoms were assessed.Results The exposure-based indices AOT40_phen and MPOC as well as the flux-based index AF_st>1.6suggest that Bavarian forests are at risk from O₃ during a rather moist average year concerning climate conditions (2002) as well as in an extreme dry year (2003). Thus, growth reductions of 5?% are predicted when thresholds are exceeded. Threshold exceedance occurred in both years at all plots, mostly already at the beginning of the growing season and often even many times over. Ozone induced leaf symptoms could be detected only on a few plots in a very slight occurrence.Discussion The results for the applied critical level indices differed depending on climatic conditions during the growing seasons: Regarding exposure-based indices, the highest degree of threshold exceedance occurred in the dry year of 2003 at all plots; the flux-based approach indicated the highest stomatal ozone uptake and thus an increased risk at moist sites or during humid years, whereas the risk was decreasing at dry sites with prolonged water limitation. Hence, soil and accordingly plant water availability was the decisive factor for the flux-modelled internal ozone uptake via stomata. Drought and increased ozone impact can generate synergistic, but also antagonistic effects for forest trees. At water limited rather dry forest sites restricted transpiration and thus production, but concurrently lower ozone uptake and reduced risk for damage can be expected.Conclusions, recommendations, and perspectives For realistic site-specific risk assessment in forest stands the determination of the internal ozone dose via modeling flux based internal stomatal ozone uptake is more appropriate than the calculation of the external ozone dose. The predicted 5?% growth reductions are in discrepancy with the frequently observed increment increase during the last decades in forest stands. Comprehensive and significant statistical verification for ozone induced forest growth reduction as well as the systematic validation of thresholds for ozone in the field is still lacking. However, a multiplicity of different specific new and retrospective growth analysis data should allow closing the gap. Moreover, the determination of canopy transpiration with sap flow measurements is a novel approach to provide cause-effect related, site specific results for the effective internal ozone dose as well as for canopy water supply and consecutively for regional risk estimation. A further future objective is the refinement of O₃ flux modelling by further consideration of soil/water budget characteristics and the above mentioned improved estimations of crown and canopy transpiration. Further, the introduction of threshold ranges for forest trees in view of their specific regional climatic conditions and their validation in real forest stands is necessary for developing meaningful ozone risk predictions for forests.     

Environmental impact of historical harbour city Zadar (Croatia) on the composition of marine sediments and soils

Sediment samples and soils along the coast line of the Adriatic Sea were sampled along a transect near the coast line at Zadar/Croatia, ranging from north-western suburbs via the historical centre and the industrial area to south-east suburbs. The sediments were dominated by carbonates and clay minerals, and contaminations with Cd–Cu–Pb–Zn–TOC (total organic carbon) at the historical centre and the industrial site were detected, as well as P and Mo input at the mouth of a small creek, probably from agriculture. No trends between the composition of surface and subsurface sea sediments were seen. At the historic harbour site, total element concentrations versus grain size showed a minimum in the fine silt fraction for most of the elements analysed. The soil samples behind the shoreline were not carbonaceous, but dominated by Fe–Al– oxides, some contained high levels of Be–Cd–Cu–Sn–Zn. Surprisingly, high TOC values within the soils might be assigned to human impacts, not to humus. Contrary to data from street dust samples from Seoul city/Korea, which were measured within our laboratory at the same time, Pt–Ir–Au were at ambient levels due to the limited use of catalysts in cars in the Zadar area at the time of sampling.