Production of Fe2O3 from FeSO4·xH2O formed in galvanizing works

FeSO₄·xH₂O is generated in large amounts in galvanizing workshops. It can be reutilized by conversion to Fe₂O₃. In this study, the recovery of Fe₂O₃ from FeSO₄·xH₂O formed in the galvanizing process has been examined. The experimental work was carried out at various temperatures and times in the oxidizing medium. The reaction temperatures and times were selected as 450, 500, 550, 600, 650, 700, 800 and 900°C, and 15, 30, 45, 60, 90 and 120 minutes, respectively. In order to determine the amount of Fe₂O₃, a titrimetric method was applied. The reaction products were characterized by means of IR and XRD techniques.The extent of conversion is low at temperatures below 650°C. Almost all of the iron (II) sulfate in the original sample was converted to iron(III) oxide at 650°C (120 min), 700°C (90 min), 800°C (60 min) and 900°C (45 min).     

Synchronous variation in water chemistry for 80 lakes in Southern Sweden

Variation in water chemistry was studied in 80 lakes in southern Sweden. The lakes had forest dominated catchments. The length of the time series was 14 years. Synchrony was calculated as Pearsons product moment correlation coefficients for all combinations of lakes, i.e. 3160 lake-pairs. The chemical variables studied were non-marine sulphate (SO₄ ^*), non-marine calcium (Ca^*), absorbance and acid neutralising capacity (ANC). Statistically significant synchrony occurred in 93% of all lake-pairs for SO₄ ^*, and between 58 and 67% for absorbance, Ca^* and ANC. In 70% of all lake-pairs, the synchrony was \s>0.71 for SO₄ ^*, which means that more than half of the variation in one lake could be explained by the variation in the other lake. For absorbance, Ca^* and ANC, about 25% of the lake-pairs had a synchrony \s>0.71. The relatively high synchrony for SO₄ ^* occurred during an overall downward trend in SO₄ ^* concentration.The degree of synchrony in our study was at a level comparable to other studies in northern America and England. However, our study included lakes in a much larger area, with distances of up to 500 km between the lakes, while earlier studies were made on small lake districts with lakes located within approximately 50 km. In contrast to these earlier studies, there was no correlation between synchrony and distance, lake characteristics or catchment characteristics. However, when a small subset of 15 lakes in the southeast of Sweden was selected, such relations were found.     

Interrelationships among foreign direct investments,renewable energy,and CO2 emissions for different European country groups: a panel ARDL approach

Environmental Science and Pollution Research - This study estimated unbalanced panel data analysis to investigate the relationship among CO2 emissions, GDP, renewable and non-renewable energy...     

Mapping of bioclimatic comfort for potential planning using GIS in Aydin

People are relaxed (satisfied or well-off) in what is described as comfortable climatic conditions. In such conditions, a person’s energy balance is not disturbed because of stresses from extreme heat or cold. Bioclimatic structure has been well researched and should be a consideration in the planning process for arranging comfortable spaces. It represents the understanding that energy balance is one of the basic elements of a sustainable landscape design. The goals of this study have been to create ideal places for human thermal comfort and to advance objectives focused on the importance of sustainable and ecological landscape planning and design work, along with their accompanying economic benefits. In this study, which focuses on the climate of the Province of Aydin, the most suitable areas for bioclimatic comfort have been identified. The climate values for the Aydin Province have been taken from a total of 22 meteorological stations. Stations at altitudes ranging from 11 to 871 m were used to note the climate changes that occurred. The average temperature, relative humidity, and wind speed from each station, including data collected using Geographic Information System (GIS) software, were transferred. GIS maps were then created from the imported data, and areas of optimal comfort around the city of Aydin were determined. The results show the range that is suitable for a bioclimatic comfort zone in Aydin. The bioclimatic comfort range was determined to be roughly 17 °C for Aydin, and the city of Aydin demonstrated a comfort range between 14 and 19 °C. As a result, the city of Aydin was shown to be a suitable area for bioclimatic comfort.     

Sulphur-oxidising bacteria isolated from deep caves improve the removal of arsenic from contaminated harbour sediments

Acidophilic S-oxidising bacteria isolated from sulphur-rich deep caves (Frasassi, Italy), characterised by relatively low temperature, were tested for their ability to mobilise (semi-)metals from contaminated sediments. Sediment samples from two commercial Italian seaports were used to set up bioleaching experiments. The effect of different growth substrates was also investigated. Our experiments revealed that S-oxidising bacteria isolated from Frasassi caves have a high potential to remove As from contaminated marine sediments, as never reported before. Although As solubilisation efficiency was quite low (i.e. about 30%), only a small amount of As was associated with non-residual fractions of the sediment. On the contrary, the solubilisation efficiencies of Zn and Ni (20% and 10%, respectively) were lower than those previously obtained by the use of other acidophilic bacteria and mainly influenced by the experimental conditions rather than by the presence of the S-oxidising bacteria. Results presented here open new perspectives in bioleaching applications for the remediation of contaminated sediments. Indeed, microbial strains adapted to relatively low-temperature environments could improve sediment bioleaching at temperature regimes where mesophilic and thermophilic strains are not favoured. Such strains could be exploited for developing selective bioremediation procedures for sediments contaminated with As, to be applied in multistep biotreatment processes.     

Genotoxic risk assessment in professionals working hairdressers area using buccal micronucleus assay,in Aydın City,Turkey

The aim of this study was to determine the genotoxic risk of professional hairdressers in Ayd?n City, Turkey, through investigating the micronucleus frequencies in buccal mucosa epithelial cells. All the hairdresser working hairdresser area were included in the genotoxic risk group (GRG = 20) in Ayd?n City, Turkey. The control group (CG = 20) comprised healthy individuals matching the gender and age of the GRG. Buccal mucosal scraping from all the 40 subjects of GRG (10 women and 10 men) and CG (10 women and 10 men) was stained with Giemsa stain and observed under light microscope (×40) for the presence of micronuclei (M 10 N) and karyolysis, pyknosis, condensed chromatin, karyorrhexis, nuclear bud, and binucleates in the exfoliated epithelial cells. There are significance between the incidence of MN in GRG and CG (P = <0.005) using one-way ANOVA, Kolmogorov-Smirnov Z test, and Spearman Rank Correlation Tests.     

Removal of Cr(VI) from aqueous solution using electrosynthesized 4-amino-3-hydroxynaphthalene-1-sulfonic acid doped polypyrrole as adsorbent

Environmental Science and Pollution Research - Polypyrrole (PPy) conducting films, doped with 4-amino-3-hydroxynaphthalene sulfonic acid (AHNSA), were electrosynthesized by anodic oxidation of...     

The effect of pyrolysis atmosphere on bio-oil yields and structure

A food industry waste, almond shell, was pyrolyzed under three different environment static, nitrogen, and steam to produce bio-oil and its derivatives. The oil yield obtained at pyrolysis temperature of 600°C was 24.23% in a static atmosphere, whereas it increased to 27.25% and 33.05% in nitrogen and steam atmospheres, respectively. The bio-oil obtained under steam atmosphere is very efficient due to the production of high liquid and gas yields. Moreover, co-feeding steam during the pyrolysis altered the bio-oil structure by increasing the aliphatics and reducing the asphaltenes. Moreover, steam treatment also increases H/C and heating value of bio-oils. According to the obtained results, steam pyrolysis is an alternative option for future applications in refineries.     

Energy and exergy analysis of a heat storage tank with a novel eutectic phase change material layer of a solar heater system

Solar energy is one of the most important renewable energy sources, but it is not available every time and every season. Thus, storing of solar energy is important. One of the popular methods of heat storage is use of phase change materials (PCMs) which have large thermal energy storage capacity. In this study, the heat storage tank in a domestic solar water heating system was chosen as control volume. The experiments were performed in the province of Elaz?g, Turkey, in November when solar radiation was weak due to cloudy sky. The heat storage tank of the system was modified to fill PCM between insulation and hot water part. A few PCMs which are Potassium Fluoride, Lithium Metaborate Dihydrate, Strontium Hydroxide Octahydrate, Barium Hydroxide Octahydrate, Aluminum Ammonium Sulfate, and Sodium Hydrogen Phosphate were analyzed to proper operating conditions using a Differential Scanning Calorimeter (DSC) and the best PCM was obtained with the Aluminum Ammonium Sulfate and Sodium Hydrogen Phosphate mixture. Thus, eutectic PCM was obtained and used in a heat storage tank of the solar water heating system. Energy and exergy analysis of heat storage tank was performed with and without the PCM. Energy and exergy analysis has shown that the heat storage tank with the PCM is more efficient than without the PCM and the maximum exergy efficiency was obtained as 22% with the heat storage tank with the PCM.