Evaluation of a fast wastewater odour characterisation procedure using a chemical sensor array

Sewage treatment works are one of the major sources that cause atmospheric odour pollution. The increase in the number of complaints about odour nuisance is due to the increase in environmental concerns. Unfortunately, the legislation on odour nuisance from sewage treatment works is very limited. In order to determine suitable thresholds on which to base legal standards, reliable and efficient odour measurement methods need to be defined. A chemical sensor array was developed for the purpose of measuring wastewater odour. This paper describes the development of the chemical sensor system which is specifically tuned to odours of wastewater origin and which can give an electronic measure of the wastewater odours. Odour emissions from a wastewater treatment facility were detected by using a quartz crystal microbalance (QCM) sensor array. The array consists of nine sensor elements, which were coated with different materials. In this paper, the usage of these novel instruments in the water industry was shown.     

Disequilibrium and Indivisibility of Pollution Control Equipment Under a Permit-Trading System: A Case Study of Kao-Hsiung and Ping-Tung Counties in Taiwan

A mixed-integer programming model that minimizes the social abatement cost is used to investigate whether a market equilibrium condition could be reached in a newly proposed permit-trading market for nitrogen oxide control in Taiwan. Unlike in previous studies, unit pollution abatement cost is determined endogenously by incorporating technology adoption as a binary decision variable. The results show that when technologies are lumpy and irreversible, disequilibrium might occur due to firms’ inability to manage their emission levels after installing equipment with fixed size and control capacity.

River water quality management model using genetic algorithm

Conventional mathematical programming methods, such as linear programming, non linear programming, dynamic programming and integer programming have been used to solve the cost optimization problem for regional wastewater treatment systems. In this study, a river water quality management model was developed through the integration of a genetic algorithm (GA). This model was applied to a river system contaminated by three determined discharge sources to achieve the water quality goals and wastewater treatment cost optimization in the river basin. The genetic algorithm solution, described the treatment plant efficiency, such that the cost of wastewater treatment for the entire river basin is minimized while the water quality constraints in each reach are satisfied. This study showed that genetic algorithm can be applied for river water quality modeling studies as an alternative to the present methods.     

The indirect effects of eutrophication on habitat choice and survival of fish larvae in the Baltic Sea

The structure of the habitat is usually crucial for growth and survival of young life stages. Presently, some nursery areas of fish larvae are changing due to eutrophication, e.g. due to enhanced growth of ephemeral filamentous algae at the expense of perennial species. We studied the influence of two habitats, one with filamentous algae (Cladophora glomerata) and the other with bladder wrack (Fucus vesiculosus), on habitat choice of pike larvae (Esox lucius) in the absence/presence of a predator or a competitor. We further tested whether the habitat choice is adaptive in increasing survival under predation threat. In contrast to expectations, pike larvae preferred the habitat with ephemeral filamentous algae to the bladder wrack, thriving in clean waters, independent of the presence/absence of both predator/competitor. In addition, the survival of the larvae was higher in the filamentous algae in the presence of predators, which suggested that the habitat preference of the larvae was adaptive. The structure of the bladderwrack habitat was probably too open for newly hatched larvae, which implies that F. vesiculosus and other large brown algae are not as important refuges for young larvae as previously thought.     

Determination of Cadmium Levels in Agricultural Areas of Çarşamba and Bafra Plains

Cadmium pollution resulted from fertilizer applications were studied by determining cadmium levels in agricultural and non-agricultural soils of Bafra and Çar?amba plains. Soil samples of 68 were collected from agricultural (34) and non-agricultural (34) areas. The sample of 2 g was placed in a test tube and digested with hydrochloric acid and nitric acid mixture (3:1, v/v) in an aluminum block. Taking up the evaporated residue was dissolved in 1% nitric acid and total cadmium concentrations were determined with GF-AAS. Mean level of cadmium contents were found in agricultural areas 0.162?±?0.078 for Çar?amba and 0.433?±?0.288 mg kg^?1 for Bafra. The accuracy of the method was tested with determining cadmium contents of standard reference material and cadmium spiked soil samples.     

Challenges to promoting eco-industry parks in Malaysia: A case study of Rawang Integrated Industrial Park

Journal of Material Cycles and Waste Management - Malaysia is a developing country, and its economic growth has caused the increase in the generation of industrial waste in terms of its volume. The...     

Composite of Natural Polymers and Their Adsorbent Properties on the Dyes and Heavy Metal Ions

Journal of Polymers and the Environment - Natural polymers such as chitosan, chitin, cellulose, alginate, pectin, and lignin produced by renewable organic resources are regarded as greener,...     

Aerobic in situ stabilization of Landfill Konstanz Dorfweiher: Leachate quality after 1 year of operation

Modern landfill understanding points out controlled operation of landfills. Emissions from landfills are caused mainly by anaerobic biodegradation processes which continue for very long time periods after landfill closure. In situ landfill stabilization aims controlled reduction of emissions towards reduced expenditures as well as aftercare measures. Since April 2010, a new in situ stabilization technique is being applied at a pilot scale landfill (BAIV) within Landfill Konstanz Dorfweiher. This new method utilizes intermittent aeration and leachate recirculation for waste stabilization. In this study, influence of this technique on leachate quality is investigated. Among many other parameters, leachate analyses were conducted for COD, BOD₅, NH₄–N, NO₂–N, NO₃–N, TKN and chloride besides continuously on site recorded pH, electrical conductivity and oxidation–reduction potential (ORP). Results from leachate quality analyses showed that biological activity in the landfill was accelerated resulting in initial higher leachate strength and reduced emission potential of landfill. During full scale in situ aeration, ambient conditions differ from optimized laboratory scale conditions which mainly concern temperature increase and deficient aeration of some landfill parts (Ritzkowski and Stegmann, 2005). Thus, as a field application results of this study have major importance on further process optimization and application.     

Modelling and Optimization of Uranium (VI) Ions Adsorption Onto Nano-ZnO/Chitosan Bio-composite Beads with Response Surface Methodology (RSM)

Nano-ZnO-chitosan bio-composite beads were prepared for the sorption of \({\text{UO}}_{2}^{{2+}}\) from aqueous media. The resulting nano-ZnO/CTS bio-composite beads were characterized by TEM, XRD etc. The sorption of \({\text{UO}}_{2}^{{2+}}\) by bio-composite beads was optimized using RSM. The correlation between four variables was modelled and studied. According to RSM data, correlation coefficients (R²?=?0.99) and probability F-values (F?=?2.24?×?10^??10) show that the model fits the experimental data well. Adsorption capacity for nano-ZnO/CTS bio-composite beads was obtained at 148.7 mg/g under optimum conditions. The results indicate that nano-ZnO/CTS bio-composite beads are appropriate for the adsorption of \({\text{UO}}_{2}^{{2+}}\) ions from aqueous media. Also, the suitability of adsorption values to adsorption isotherms was researched and thermodynamic data were calculated.