Potential utilization of burned wood in manufacture of medium density fiberboard

The potential utilization of burned wood in the manufacture of medium density fiberboard (MDF) was investigated. For this aim, the MDF panels were made of various mixtures of burned pine wood (Pinus sylvestris L.), unburned beech (Fagus orientalis L.) and oak (Ouercus robur L.) woods under commercial conditions in an MDF company. The mixture ratio of the unburned beech and oak woods to the burned pine wood were 50/50 wt%. The mixing ratios of burned wood chips with unburned wood chips were 0:100, 25:75, 50:50, 75:25 and 100:0, %, respectively. A commercial urea–formaldehyde resin was used as a binder. The physical properties measured in the investigation included density and thickness swelling, while the mechanical properties examined were bending strength, modulus elasticity, internal bond, screw holding ability perpendicular to the plane of panel, and janka hardness perpendicular to the plane of the panel. Surface roughness and color of the panels were also measured. The results indicated that all the panels met the mechanical properties of general-purpose MDF requirements of EN 622-5. The surface roughness of the MDF panels containing burned wood decreased with increasing burned wood content but remained higher than the control panels. The dimensional stability of the MDF panels decreased with the incorporation of burned wood fibers as compared with the control MDF panels.     

Classification of residential areas according to physical vulnerability to natural hazards: a case study of Çanakkale,Turkey

The selection of new settlement areas and the construction of safe buildings, as well as rendering built‐up areas safe, are of great importance in mitigating the damage caused by natural disasters. Most cities in Turkey are unprepared for natural hazards. In this paper, Çanakkale, located in a first‐degree seismic zone and sprawled around the Sartçay Delta, is examined in terms of its physical vulnerability to natural hazards. Residential areas are analysed using GIS (geographic information system) and remote‐sensing technologies in relation to selected indicators. Residential areas of the city are divided into zones according to an evaluation of geological characteristics, the built‐up area's features, and urban infrastructure, and four risk zones are determined. The results of the analysis show that the areas of the city suitable for housing are very limited. In addition, the historical centre and the housing areas near Sartçay stream are shown to be most problematic in terms of natural disasters and sustainability.     

Time-varying causality between income inequality and ecological footprint in Turkey

Environmental Science and Pollution Research - This paper investigates the relationship between income inequality and environmental degradation for the case of Turkey between 1987 and 2017 through...     

On plankton production in Kungsbacka Fjord,an estuary on the Swedish west coast

Environmental conditions, primary production, and zooplankton populations were studied from May, 1969 to November, 1970 at one station in Kungsbacka Fjord, Sweden. The fjord, with an arca of 53 km², is a moderately polluted estuary, with a small tidal range. Data for primary production and environmental parameters were correlated using Spearman's rank correlation coefficient. The annual rate of primary production in 1970 was about 100 gC·m^-2. Carbon fixation was about 80 g·m^-2 in May–November in1969 and 1970. The average monthly rate was highest in June, 1970, with 25 gC·m^-2; about 15 gC·m^-2 was recorded in August–October of both years. Carbon fixation by the phytoplankton was estimated to be about 2,800 tons in the whole fjord in 1970. The average fresh-water inflow to the fjord, amounting to about 13 m³·sec^-1, added about 380 tons of organic carbon, 45 tons of nitrogen, and 4.5 tons of phosphorus per month. Primary production displayed strong correlation with temperature at different depths (P<0.05 to 0.001), indicating the sediments to be the most important nutrient source. A total of 19 holoplanktonic zooplankton species was identified, copepods being the dominant group. The highest zooplankton biomass, 800 to 900 mg·m^-3, was recorded in June of both years. The production of copepods in May–October was about 1 gC·m^-2 in both years. The total secondary production of the zooplankton was calculated as only 1.8 gC·m^-2 in 1970.     

Degradation of PVC Containing Mixtures in the Presence of HCl Fixators

Degradation of a model polymer mixture (PVC/PS/PE) and a waste polymer mixture in the presence of HCl fixators (Red Mud, precipitated CaCO₃ and dolamite) was studied using thermal gravimetric analysis (TGA) and a cycled-spheres-reactor. The experiments in cycled-spheres reactor model were performed by stepwise pyrolysis. Liquid products and HCl from each step were collected separately. For the model polymer mixture, the precipitated CaCO₃ showed the best effect on the fixation of evolved HCl and the reduction of chlorine content in the liquid products whereas RM yielded the best result for the waste polymer mixture. In addition, using HCl fixator also affected the degradation of both types of polymer mixture, leading to the formation of more gaseous and less residue.     

Communicative Aspects of Environmental Management by Objectives: Examples from the Swedish Context

Management by objectives (MBO) is a technique for integrating ecological concerns into national political and administrative structures. Politicians determine environmental objectives and interim targets to be implemented and assessed by civil servants in national, regional, and local contexts. Well-developed organizational communication is a prerequisite for MBO. However, communication-related obstacles can arise when using MBO in public environmental management. We examine communicative aspects of environmental MBO, looking specifically at the implementation, administration, and assessment of Swedish environmental quality objectives. Our argument is illustrated by quotations from individual and focus group interviews. We conclude that communicative problems may arise, because different actors interpret messages from different perspectives, depending on their agendas, prior knowledge and experience, and positions in the administrative system. It is crucial to recognize the dialogical aspects of communication, by involving the receiver of a message in a process of response. In addition, the different timeframes underlying different arguments could contribute to misunderstandings between actors involved in handling environmental issues. In assessing the achievement of environmental objectives, indicators are used as communicative tools. It is important to investigate whether and how these indicators contribute to the de- and recontextualization of environmental objectives.     

Degradation of azo dyes in water by Electro-Fenton process

The degradation of the azo dyes azobenzene, p-methyl red and methyl orange in aqueous solution at room temperature has been studied by an advanced electrochemical oxidation process (AEOPs) under potential-controlled electrolysis conditions, using a Pt anode and a carbon felt cathode. The electrochemical production of Fenton's reagent (H₂O₂, Fe²⁺) allows a controlled in situ generation of hydroxyl radicals (^·OH) by simultaneous reduction of dioxygen and ferrous ions on the carbon felt electrode. In turn, hydroxyl radicals react with azo dyes, thus leading to their mineralization into CO₂ and H₂O. The chemical composition of the azo dyes and their degradation products during electrolysis were monitored by high performance liquid chromatography (HPLC). The following degradation products were identified: hydroquinone, 1,4-benzoquinone, pyrocatechol, 4-nitrocatechol, 1,3,5-trihydroxynitrobenzene and p-nitrophenol. Degradation of the initial azo dyes was assessed by the measurement of the chemical oxygen demand (COD). Kinetic analysis of these data showed a pseudo-first order degradation reaction for all azo dyes. A pathway of degradation of azo dyes is proposed. Specifically, the degradation of dyes and intermediates proceeds by oxidation of azo bonds and aromatic ring by hydroxyl radicals. The results display the efficiency of the Electro-Fenton process to degrade organic matter. Electronic Publication     

Impacts of globalization and energy consumption on environmental degradation: what is the way forward to achieving environmental sustainability targets in Nigeria?

Environmental Science and Pollution Research - One of the major problems the world is currently facing is climate change. This is due to the use of fossil fuel combustion, which increases the...     

The nexus between remittances,natural resources,technological innovation,economic growth,and environmental sustainability in Pakistan

Globally, the issues about sustainable development are on the increase. Moreover, these issues are rising every day in Pakistan, as remittances are increasing, technology innovation is ambiguous, natural resources are degraded, and economic expansion might pose serious challenges to the environment. Thus, this research looks at how remittances, natural resources, technological innovation, and economic growth affect carbon dioxide (CO₂₎ emissions in Pakistan by controlling energy consumption and urbanization from 1990 to 2019. The Bayer and Hanck test of combined cointegration discloses a cointegration between remittances, natural resources, technological innovations, economic growth, and CO₂ emissions. Moreover, the autoregressive distributive lag model (ARDL) proposes a significant positive association between remittances and CO₂ emissions in the long run, indicating that the increase in remittances distresses the environmental performance of Pakistan. Our study confirms that natural resources decrease CO₂ emissions while technological advancement, economic progress, energy use, and urbanization increase CO₂ emissions. In addition, the results of robustness checks by employing fully modified ordinary least squares and dynamic ordinary least squares are parallel to the conclusions of ARDL estimations. Furthermore, the frequency causality test results show that remittances, natural resources, technological innovation, economic growth, energy use, and urbanization cause CO₂ emissions at different frequencies. Therefore, to achieve the sustainable development goals, appropriate policy repercussions can be developed toward advanced and environmentally sustainable sources of energy.

     

Do anthropogenic and natural factors elevate the haze pollution in the South Asian countries? Evidence from long-term cointegration and VECM causality estimation

Environmental Science and Pollution Research - Anthropogenic and natural factors lead to substantial environmental degradation. This shift is aligned with the country's overall development,...