Partitioning and removal of perfluorooctanoate during rain events: the importance of physical-chemical properties

The potential for airborne emissions to undergo long-range transport or to be removed from the atmosphere is influenced by their physical-chemical properties. When perfluorooctanate (PFO) enters the environment, its physical-chemical properties can vary significantly, depending on whether it exists as an acid, a salt, or a dissociated ion. A summary of the physical-chemical properties of the three most likely environmental states: ammonium perfluorooctanoate (APFO), perfluorooctanoic acid (PFOA) and the dissociated perfluorooctanoate anion (PFO(-)) is presented to illustrate the distinct environmental properties of each. The most volatile species, PFOA, is shown to have a pH-dependent air-water partitioning coefficient (K(aw)). The variability of K(aw) with pH influences the potential for vapor formation from aqueous environments, including rain events. Using the pH-dependent K(aw) and measured rain and air concentrations, it is shown that vapor-phase PFOA is not likely to be present above measurable levels of 0.2 ng m(-3) (12 parts per quadrillion v/v) during a rain event. Because rain concentrations determined in this work are comparable to measurements in other parts of North America, it is unlikely that rain events are a significant source of vapor-phase PFOA for the general North American region. It is shown that PFOA exists primarily in the particle phase in ambient air near direct sources of emissions and is efficiently scavenged by rain droplets, making wet deposition an important removal mechanism for emissions originating as either PFOA or APFO. Washout ratios of particle-associated PFO were determined to range between 1 x 10(5) and 5 x 10(5), in the same range as other semi-volatile compounds for which wet deposition is an important mechanism for atmospheric removal and deposition onto soils and water bodies.     

A near real-time system for continuously monitoring airborne subtilisin-type enzymes in the industrial atmosphere

We describe the development and validation of a portable system comprising an air sampler coupled to an automated flow injection analysis device. The system is able to monitor airborne concentrations of subtilisin-type enzymes in the workplace atmosphere on a continuous basis. Sampling is in two stages: using a sampling head that is designed to mimic human respiration at approx. 1 m s(-1) at a sampling rate of 600 l min(-1). In the second stage, the captured particles are deposited by impaction from the air stream onto the inner surface of a cyclone that is continuously washed with a jet of buffer solution. Deposited particles are then washed into a reservoir from which samples are taken every 5-6 min and injected automatically into a continuous flow injection analysis system. Proteolytic enzyme in the sample passes through a bioreactor maintained at about 40 degrees C. This contains a cellulose solid phase matrix on which is covalently immobilised Texas Red-labelled gelatin as substrate. The passing enzyme partially digests the substrate releasing fluorophore that is detected down stream in a flow cell coupled to a fluorimeter. The system is calibrated using enzyme standards and the intensity of the resulting peaks from the ex-air samples is converted to airborne concentrations using a mathematical model programmed into a PC. The system has a limit of detection of 4.8 ng m(-3) and a dynamic range of 5-60 ng m(-3). The within assay precision (RSD) is 6.3-9.6% over this range. The within batch precision is 20.3% at 20 ng m(-3) and the corresponding between batch value is 19.5%. The system has been run for periods up to 8 h in the laboratory and for up to 4 h at a factory site and the values obtained compared with time-averaged values obtained from a conventional Galley sampler and in-house analysis when reasonable agreement of the results was observed. The stability of the system over 21 days of continuous use with standards injected periodically was studied. Linearity was observed for all the standard plots throughout. At the end of 21 days, after a total exposure equivalent to 2395 ng ml(-1) of Savinase, the signal due to the 5.0 ng ml(-1) standard was still easily detectable.     

Source to sink tracking of selected human pharmaceuticals from two Oslo city hospitals and a wastewater treatment works

The occurrence of twenty pharmaceutical compounds was quantitatively determined in effluents from two major Oslo city hospitals, Rikshospitalet and Ullev?l, along with influent, sludge and final effluent from the city's VEAS wastewater treatment works (WTW). Composite hospital effluents were collected over a twelve week period and were showed to contain paracetamol, metoprolol, diclofenac, ibuprofen, 17beta-Estradiol, estriol, estrone, oxytetracycline, tetracycline, doxycycline, chlorotetracycline, demeclocycline, trimethoprim, ciprofloxacin, sulfamethoxazole, cyclophosphamide and ifosfamide. Three pharmaceuticals were not detected above the limit of detection; cefuroxime, 17alpha-ethinylestradiol and meclocycline. Composite influent, sludge and effluent samples were collected from VEAS WTW over a seven week period. The influent into VEAS WTW contained all of the same selected substances detected in the hospital effluents, except for oxytetracycline, chlorotetracycline, demeclocycline, cyclophosphamide and ifosfamide. The percentage of pharmaceuticals entering the works from the hospitals was <10% for all of the selected compounds. VEAS sludge samples contained a different profile of substances reflecting their physico-chemical properties. Hydrophobic antibiotics, such as oxytetracycline, tetracycline and ciprofloxacin, were detected in all of the collected sludge samples. Their absence in the collected influent samples suggests that they enter the works bound to effluent particles, with the dissolved fraction observed in the hospital effluents partitioning onto particulate matter within the sewerage network. The final effluent from VEAS WTW contained reduced concentrations of many pharmaceuticals, including paracetamol, ibuprofen and sulfamethoxazole. For other compounds, such as metoprolol, diclofenac and trimethoprim, there were often higher concentrations in the effluent than the influent. These effluent concentrations represent median inputs varying from low g day(-1) (e.g. paracetamol and ibuprofen) to nearly 200 g day(-1) (e.g. metoprolol and trimethoprim) into Oslofjord. A simple risk assessment showed that the antibiotic ciprofloxacin may at times pose an acute risk to the Oslofjord aquatic environment.     

The use of maize and poplar in chelant-enhanced phytoextraction of lead from contaminated agricultural soils

Chelant-enhanced phytoextraction of heavy metals is an emerging technological approach for a non-destructive remediation of contaminated soils. The main objectives of this study were (i) to assess the extraction efficiency of two different synthetic chelating agents (ethylenediaminetetraacetic acid (EDTA) and ethylenediaminedisuccinic acid (EDDS)) for desorbing Pb from two contaminated agricultural soils originating from a mining and smelting district and (ii) to assess the phytoextraction efficiency of maize (Zea mays) and poplar (Populus sp.) after EDTA application. EDTA was more efficient than EDDS in desorbing and complexing Pb from both soils, removing as much as 60% of Pb. Maize exhibited better results than poplar when extracting Pb from the more acidic (pH approximately 4) and more contaminated (up to 1360 mg Pb kg(-1)) agricultural soil originating from the smelting area. On the other hand, poplars proved to be more efficient when grown on the near-neutral (pH approximately 6) and less contaminated (up to 200 mg Pb kg(-1)) agricultural soil originating from the mining area. Furthermore, the addition of EDTA led to a significant increase of Pb content especially in poplar leaves, proving a strong translocation rate within the poplar plants.     

Dynamic responses of photosystem II in the Namib Desert shrub, Zygophyllum prismatocarpum, during and after foliar deposition of limestone dust

The effects of limestone dust deposition on vegetation in desert ecosystems have not yet been reported. We investigated these effects in a succulent shrub from the Namib Desert at a limestone quarry near Skorpion Zinc mine (Namibia). Effects of limestone dust were determined in Zygophyllum prismatocarpum (dollar bush) plants with heavy, moderate and no visible foliar dust cover by means of chlorophyll a fluorescence measurements. Limestone dust deposition decreased overall plant performance through loss of chlorophyll content, inhibition of CO(2) assimilation, uncoupling of the oxygen-evolving complex and decreased electron transport. Importantly, dynamic recovery occurred after termination of limestone extraction at the quarry. Recovery was accelerated by rainfall, mainly because of dust removal from leaves and stimulation of new growth. These results indicate that limestone dust has severe effects on photosynthesis in desert shrubs, but that recovery is possible and that, in arid environments, this process is modulated by rainfall.     

Exemplifying whole-plant ozone uptake in adult forest trees of contrasting species and site conditions

Whole-tree O3 uptake was exemplified for Picea abies, Fagus sylvatica and Larix decidua in stands at high and low altitude and contrasting water availability through sap flow measurement in tree trunks, intrinsically accounting for drought and boundary layer effects on O3 flux. O3 uptake of evergreen spruce per unit foliage area was enhanced by 100% at high relative to low elevation, whereas deciduous beech and larch showed similar uptake regardless of altitude. The responsiveness of the canopy conductance to water vapor and, as a consequence, O3 uptake to soil moisture and air humidity did not differ between species. Unifying findings at the whole-tree level will promote cause-effect based O3 risk assessment and modeling.     

On the presence of enriched amounts of 235U in hot particles from the terrestrial area affected by the Palomares accident (Spain)

The characterisation by ICP-MS of an isolated Pu-U hot particle originating from the nuclear weapons accident in Palomares (Spain) shows, for the first time, that its uranium content is highly enriched in (235)U. The enrichment has been confirmed by independent analyses of two surface soil samples collected in a heavily contaminated area close to the impact point of one of the bombs. This finding clarifies better the composition of the weapons involved in the accident and is of importance when the inventory of U and Pu in the contaminated area are to be calculated.     

Real time remote monitoring of air pollutants and their online transmission to the web using internet protocol

Recent advances in both information and sensor technologies have enabled the development of Real Time Remote Monitoring (RTRM) capabilities for environmental management. An online and real time remote monitoring system for air pollution has been designed and installed at a traffic police station at Punjagutta in Hyderabad, India. The system is optimized using electrochemical sensors and a real time particulate matter analyzer. The system also monitors meteorological parameters such as temperature, humidity, rainfall, barometric pressure, wind speed and wind direction. The system periodically monitors both pollution and meteorological parameters at pre- programmed intervals of hr during peak periods and 1 hr during non peak periods of the day and continuously uploads to a predestinated web site (www.appcb.org/home.htm) using File Transfer Protocol. The web site renders a quick, simple and graphical display of air pollution levels and meteorological parameters and their significance to humans. The present paper highlights design considerations of a pollution monitoring system, system hardware and software requirements and practical limitations and future directions for real time remote monitoring of air pollution.     

Determining Sources of Fecal Bacteria in Waterways

The microbiological contamination of waterways by pathogenic microbes has been, and is still, a persistent public safety concern in the United States and in most countries of the world. As most enteric pathogens are transmitted through the fecal–oral route, fecal pollution is generally regarded as the major contributor of pathogens to waterways. Fecal pollution of waterways can originate from wastewater treatment facilities, septic tanks, domestic- and wild-animal feces, and pets. Because enteric pathogens are derived from human or animal sources, techniques capable of identifying and apportioning fecal sources have been intensively investigated for use in remediation efforts and to satisfy regulatory concerns. Pollution of human origin is of the most concern, since human feces is more likely to contain human-specific enteric pathogens. Fecal indicator bacteria have been used successfully as the primary tool for microbiologically based risk assessment. However measurement of fecal indicator bacteria does not define what pathogens are present, or define the sources of these bacteria. Microbial source tracking (MST) methods that have the ability to differentiate among sources of fecal pollution are currently under development. These methods will ultimately be useful for risk assessment purposes and to aid regulatory agencies in developing strategies to remediate microbiologically impaired waterways.     

Pesticide Residues in Bovine Milk from a Predominantly Agricultural State of Haryana, India

One hundred forty seven samples of bovine milk were collected from 14 districts of Haryana, India during December 1998–February 1999 and analysed for the presence of organochlorine pesticide (OCPs) residues. ∑HCH, ∑DDT, ∑endosulfan and aldrin were detected in 100%, 97%, 43% and 12% samples and with mean values of 0.0292, 0.0367, 0.0022 and 0.0036 μg/ml, respectively. Eight percent samples exceeded the maximum residue limit (MRL) of 0.10 mg/kg as recommended by WHO for ∑HCH, 4% samples of 0.05 mg/kg for α-HCH, 5% samples of 0.01 mg/kg for γ-HCH, 26% samples of 0.02 mg/kg for β-HCH as recommended by PFAA and 24% samples of 0.05 mg/kg as recommended by FAO for ∑DDT. Concentrations of β-HCH and p,p′-DDE were more as compared to other isomers and metabolites of HCH and DDT.