A Comparative Study of Environmental Tobacco Smoke Particulate Mass Measurements in an Environmental Chamber

Particulate mass concentration measurements have been made on environmental tobacco smoke (ETS) for the purpose of assessing the relative accuracy of several measurement procedures. ETS over a range of concentrations was generated in an environmental chamber by three methods. Mass concentration was measured by a gravimetric/spectrophotometric collection procedure, piezoelectric particle mass monitors, two nephelometry-based mass monitors, and a particle counting and sizing system. Two-hour average mass concentrations were determined by each method for concentrations ranging from very low levels up to those achieved by smoking one entire cigarette in the chamber. Statistical comparisons were made among procedures employing the gravimetric filter measurement as the basis for comparison. One nephelometry-based procedure gave significantly higher and the other significantly lower values than the filter determination. In one case, a correction for the difference between the particle mass density of the calibrating aerosol and that of ETS brought the nephelometry-based procedure into reasonable agreement with the filter measurement, while for the other, the correction did not resolve the discrepancy between methods. Statistically significant differences between the responses of two supposedly identical piezoelectric mass monitors were found, as was some slight dependence of the nephelometry- based procedures on method of ETS generation. In summary, the results indicate that significant errors can be expected if the instruments studied are used “off the shelf,” even for ETS generated under controlled laboratory conditions. Caution should be employed in field measurements where numerous sources and types of particulate matter can be encountered.     

A Preliminary Look at Source-Receptor Relationships in the Texas-Mexico Border Area

ABSTRACT

Several factors have recently caused visibility impairment at Big Bend National Park, TX, to be of interest. Analyses of historical data collected there have shown that visibility is poorer and fine particle concentrations are higher at Big Bend than at other monitored Class I areas in the western United States. In addition, air masses frequently arrive there after crossing Mexico, where emissions are not well known. During September and October 1996, a field study was undertaken to begin examining the aerosol, visibility, and meteorology on both sides of the border. Results indicate that, during the study, the largest fractions of fine mass and light extinction at Big Bend were due to sulfates and the trace elements most closely associated with sulfate particles were Na and Se. Based on back trajectory modeling and the spatial, temporal, and inter-species relationships in the fine particle concentrations measured during the study, sulfates arrived at the park from both Mexico and the United States. Se was higher in Texas than in Northern Mexico, while V, Pb, Zn, Ni, and Mn were on average much higher in Mexico.     

Occurrence of PCDD/Fs and dioxin-like PCBs in superficial sediment of Portuguese estuaries

Superficial sediments collected from seven estuarine systems located along the Portuguese coast were analyzed for 7 polychlorinated dibenzo-p-dioxins (PCDDs), 10 polychlorinated dibenzofurans (PCDFs), and 12 dioxin-like polychlorinated biphenyls (dl-PCBs). Total PCDD/F concentration ranged from 4.6 to 464 pg g^?1 dry weight (dw), while that of dl-PCBs varied from 26.6 to 8,693 pg g^?1 dw. In general, the highest PCDD/F and dl-PCB concentrations were associated with densely populated and industrially impacted areas. Additionally, PCDD/F revealed a predominance of octachlorodibenzodioxin (OCDD) to total PCDD/Fs, while PCB 118 was the major contributor to total dl-PCBs. This study provided a global perspective of the contamination status of Portuguese estuaries by dioxin-like compounds and allowed a comparison between the investigated systems and other systems worldwide. PCDD/F and dl-PCB levels found in the collected sediments were lower than those of highly impacted areas from different parts of the globe. Nevertheless, comparison with guidelines and quality standards from other countries indicated that some Portuguese estuarine areas with a high industrialization level present PCDD/F and dl-PCB concentrations in superficial sediment that may constitute a risk to aquatic organisms.     

Organochlorine contaminants in different tissues from Platichthys flesus (Pisces,Pleuronectidea)

Polychlorinated biphenyls (PCBs) and hexachlorobenzene (HCB) are organic contaminants that tend to accumulate in fish. Estuaries are exposed to high anthropogenic activities, therefore tending to accumulate more contaminants than the adjacent coastal waters. Platichthys flesus, a fish with high economic value, was analysed for PCBs and HCB along its different age groups, in liver, gills, gonads and muscle. Younger fishes were caught in the estuary, whereas older fishes were caught in the adjacent coastal waters and acquired at Figueira da Foz Regional Office of Docapesca-Portos e Lotas, SA. Both contaminants concentrations follow the pattern: liver > gills > muscle. Hepatosomatic index had the lowest values in younger fishes and the highest values in older fishes. Condition factor values remain stable with age. Younger fishes had higher PCBs concentrations than the older fishes. In opposition HCB was only detected in fish from 3+ to 5+ and its concentration tended to increase with age. Overall P. flesus is considered safe for human intake.     

Phytomanagement of strongly acidic,saline eutrophic wetlands polluted by mine wastes: The influence of liming and Sarcocornia fruticosa on metals mobility

The aim of this study was to assess the effectiveness of combining liming and vegetation for the phytomanagement of strongly acidic, saline eutrophic wetlands polluted by mine wastes. Simulated soil profiles were constructed and four treatments were assayed: without liming + without plant, without liming + with plant, with liming + without plant and with liming + with plant. The plant species was the halophyte Sarcocornia fruticosa. Three horizons were differentiated: A (never under water), C1 (alternating flooding–drying conditions) and C2 (always under water). The soluble Cd, Cu, Mn, Pb and Zn concentrations were measured regularly for 18 weeks and a sequential extraction procedure was applied at the end of the experiment. Liming was effective (between ～70% and ～100%) in reducing the soluble Zn, Cu and Pb. In contrast, soluble Mn and Cd increased with liming, especially in the treatment with liming + with plant, where the concentrations were 2-fold higher than in the non-limed treatments. The amendment increased the contents of Zn, Mn and Cd bound to potentially-mobilisable soil fractions at the expense of the most-environmentally-inert fractions. Hence, the combined use of liming and vegetation may increase the long-term environmental risk of metals solubilisation.     

Use of biological indicators to assess water quality of the Ul River (Portugal)

Diatoms and macroinvertebrates have been extensively used as water quality indicators in Europe for the last two decades. In Portugal, the use of biological indicators to assess water quality in rivers has increased greatly. The aim of this work was to assess the water quality and ecological status of the Ul River in order to evaluate its ability for the establishment of a fluvial beach, using periphytic diatoms and macroinvertebrates as indicators. Four sites were selected along the Ul River. At each site, biological, physical, and chemical parameters were investigated. Epilithic diatoms and macroinvertebrates were sampled. The Specific Polluosensitivity Index and the Biological Diatom Index were applied to diatom data, while for macroinvertebrates, the Iberian Biological Monitoring Working Party (IBMWP) was used. According to the results obtained, it was possible to conclude that up to now, this river does not possess the ideal conditions for the establishment of a fluvial beach. We concluded that epilithic diatoms and macroinvertebrates provided consistent information on water quality assessment and can be used as biological indicators of the water quality in Ul River.     

Methodology for Identifying Optimal Locations of Water Quality Sensors in River Systems

A method to optimally site river water quality sensors is expanded and applied to a case study river to explore the application of mathematical siting methods to the design of river sampling networks. Fecal coliform contamination due to flooded swine waste lagoons was modeled as it moves downstream, and optimal sensor locations are located by minimizing the objective function of the optimization problem. The results of the simulations are analyzed by varying the number of allowed sampling locations and the simulated contamination event. For the case study application, the model suggests three sampling locations along the modeled river section. These three suggested sensing points did not greatly vary in location for different river flows and contamination events, indicating the robustness of the model results for this specific case study. Generally, the application of mathematical contaminant modeling is a useful and systematic approach to aid the design of river water quality monitoring networks.     

Kinetic studies of endosulfan photochemical degradations by ultraviolet light irradiation in aqueous medium

Kinetic studies of endosulfan photochemical degradation in controlled aqueous systems were carried out by ultraviolet light irradiation at lambda = 254 nm. The photolysis of (alpha + beta: 2 + 1) endosulfan, alpha-endosulfan and beta-endosulfan were first-order kinetics. The observed rate constants obtained from linear least-squares analysis of the data were 1 x 10(-4) s(-1); 1 x 10(-4) s(-1); and 2 x 10(-5) s(-1), respectively, and the calculated quantum yields (phi) were 1, 1 and 1.6, respectively. Preliminary differential pulse polarographic (DPP) analysis allowed to observe the possible endosulfan photochemical degradation pathway. This degradation route involves the formation of the endosulfan diol, its transformation to endosulfan ether and finally the ether's complete degradation by observing the potential shifts.