A PROPOSED APPROACH TO COORDINATION OF WATER RESOURCE DEVELOPMENT AND ENVIRONMENTAL REGULATIONS1

ABSTRACT: The planning and developing of water resources to meet the country's needs for water supply, flood control, hydroelectric power, irrigation, and navigation now needs to take more account of environmental needs and regulations. Water resource development is often beneficial to the environment, but may also be harmful, as in cases involving salmon and various other endangered species. As a national objective, the environment must be preserved and in some cases restored; but how can this be done consistent with other national objectives, relating to life and welfare of human beings? This problem has aroused the concern of many engineers and water scientists. As a result, a national conference on this subject was held in Chicago in June 1998, as an integral part of ASCE's Annual Conference on Water Resources Planning and Management and the Annual Conference on Environmental Engineering. At the conclusion of that conference, a post-conference meeting was held by a group of prominent water resource practitioners. It was concluded at this meeting that action should be taken by our government to establish a new form of interagency approach, involving the states, as a means of coordination in cases of national importance.     

Modelling of discharge and atmospheric dispersion for carbon dioxide releases

This paper discusses the modelling of the discharge and subsequent atmospheric dispersion for carbon dioxide releases using extensions of models in the consequence modelling package Phast. Phast examines the progress of a potential incident from the initial release to the far-field dispersion including the modelling of rainout and subsequent vaporisation. The original Phast discharge and dispersion models allow the released chemical to occur only in the vapour and liquid phases. As part of the current work these models have been extended to also allow for the occurrence of liquid to solid transition or vapour to solid transition. This applies both for the post-expansion state in the discharge model, as well as for the thermodynamic calculations by the dispersion model. Solid property calculations have been added where necessary. The above extensions are generally valid for fluid releases including CO₂. Using the extended dispersion formulation, a sensitivity study has been carried out for mixing of solid CO₂ with air, and it is demonstrated that solid effects may significantly affect the predicted concentrations.     

Nitrogen,Phosphorus, Carbon,and Suspended Solids Loads from Forest Clear-Cutting and Site Preparation: Long-Term Paired Catchment Studies from Eastern Finland

The long-term impacts of current forest management methods on surface water quality in Fennoscandia are largely unexplored. We studied the long-term effects of clear-cutting and site preparation on runoff and the export of total nitrogen (total N), total organic nitrogen (TON), ammonium (NH₄-N), nitrate (NO₃-N), total phosphorus (total P), phosphate (PO₄-P), total organic carbon, and suspended solids (SS) in three paired-catchments in Eastern Finland. Clear-cutting and soil preparation were carried out on 34 % (C34), 11 % (C11), and 8 % (C8) of the area of the treated catchments and wide buffer zones were left along the streams. Clear-cutting and soil preparation increased annual runoff and total N, TON, NO₃-N, PO₄-P, and SS loads, except for SS, only in C34. Runoff increased by 16 % and the annual exports of total N, TON, NO₃-N, and PO₄-P by 18, 12, 270, and 12 %, respectively, during the 14-year period after clear-cutting. SS export increased by 291 % in C34, 134 % in C11, and 16 % in C8 during the 14, 6, and 11-year periods after clear-cutting. In the C11 catchment, NO₃-N export decreased by 12 %. The results indicate that while current forest management practices can increase the export of N, P and SS from boreal catchments for many years (>10 years), the increases are only significant when the area of clear cutting exceeds 30 % of catchment area.     

Transport of Escherichia coli through variably saturated sand columns and modeling approaches

A sand column leaching system with well-controlled suction and flow rate was built to investigate the effects on bacterial transport of air-water interface effects (AWI) correlated to water content, particle size, and column length. Adsorption of Escherichia coli strain D to silica sands was measured in batch tests. The average % adsorption for coarse and fine sands was 45.9+/-7.8% and 96.9+/-3.2%, respectively. However, results from static batch adsorption experiments have limited applicability to dynamic bacterial transport in columns. The early breakthrough of E. coli relative to bromide was clear for all columns, namely c. 0.15 to 0.3 pore volume earlier. Column length had no significant effects on the E. coli peak concentration or on total recovery in leachate, indicating retention in the top layer of sands. Tailing of breakthrough curves was more prominent for all fine sand columns than their coarse sand counterparts. Bacterial recovery in leachate from coarse and saturated sand columns was significantly higher than from fine and unsaturated columns. Observed data were fitted by the convection-dispersion model, amended for one-site and two-site adsorption to particles, and for air-water interface (AWI) adsorption. Among all models, the two-site+AWI model achieved consistently high model efficiency for all experiments. Thus it is evident from experimental and modeling results that AWI adsorption plays an important role in E. coli transport in sand columns.     

Assessing the risk caused by ground level ozone to European forest trees: a case study in pine, beech and oak across different climate regions

Two different indices have been proposed for estimation of the risk caused to forest trees across Europe by ground-level ozone, (i) the concentration based AOT40 index (Accumulated Over a Threshold of 40 ppb) and (ii) the recently developed flux based AFstY index (Accumulated stomatal Flux above a flux threshold Y). This paper compares the AOT40 and AFstY indices for three forest trees species at different locations in Europe. The AFstY index is estimated using the DO(3)SE (Deposition of Ozone and Stomatal Exchange) model parameterized for Scots pine (Pinus sylvestris), beech (Fagus sylvatica) and holm oak (Quercus ilex). The results show a large difference in the perceived O(3) risk when using AOT40 and AFstY indices both between species and regions. The AOT40 index shows a strong north-south gradient across Europe, whereas there is little difference between regions in the modelled values of AFstY. There are significant differences in modelled AFstY between species, which are predominantly determined by differences in the timing and length of the growing season, the periods during which soil moisture deficit limits stomatal conductance, and adaptation to soil moisture stress. This emphasizes the importance of defining species-specific flux response variables to obtain a more accurate quantification of O(3) risk.     

Comparison of semipermeable membrane device (SPMD) and large-volume solid-phase extraction techniques to measure water concentrations of 4,4'-DDT, 4,4'-DDE, and 4,4'-DDD in Lake Chelan, Washington

Semipermeable membrane devices (SPMDs) spiked with the performance reference compound PCB29 were deployed 6.1 m above the sediments of Lake Chelan, Washington, for a period of 27 d, to estimate the dissolved concentrations of 4,4'-DDT, 4,4'-DDE, and 4,4'-DDD. Water concentrations were estimated using methods proposed in 2002 and newer equations published in 2006 to determine how the application of the newer equations affects historical SPMD data that used the older method. The estimated concentrations of DDD, DDE, and DDD calculated using the older method were 1.5-2.9 times higher than the newer method. SPMD estimates from both methods were also compared to dissolved and particulate DDT concentrations measured directly by processing large volumes of water through a large-volume solid-phase extraction device (Infiltrex 300). SPMD estimates of DDD+DDE+DDT (SigmaDDT) using the older and newer methods were lower than Infiltrex concentrations by factors of 1.1 and 2.3, respectively. All measurements of DDT were below the Washington State water quality standards for the protection of human health (0.59 ng l(-1)) and aquatic life (1.0 ng l(-1)).     

Major shifts in Amazon wildlife populations from recent intensification of floods and drought

In the western Amazon Basin, recent intensification of river‐level cycles has increased flooding during the wet seasons and decreased precipitation during the dry season. Greater than normal floods occurred in 2009 and in all years from 2011 to 2015 during high‐water seasons, and a drought occurred during the 2010 low‐water season. During these years, we surveyed populations of terrestrial, arboreal, and aquatic wildlife in a seasonally flooded Amazonian forest in the Loreto region of Peru (99,780 km²) to study the effects of intensification of natural climatic fluctuations on wildlife populations and in turn effects on resource use by local people. Shifts in fish and terrestrial mammal populations occurred during consecutive years of high floods and the drought of 2010. As floods intensified, terrestrial mammal populations decreased by 95%. Fish, waterfowl, and otter (Pteronura brasiliensis) abundances increased during years of intensive floods, whereas river dolphin and caiman populations had stable abundances. Arboreal species, including, macaws, game birds, primates, felids, and other arboreal mammals had stable populations and were not affected directly by high floods. The drought of 2010 had the opposite effect: fish, waterfowl, and dolphin populations decreased, and populations of terrestrial and arboreal species remained stable. Ungulates and large rodents are important sources of food and income for local people, and large declines in these animals has shifted resource use of people living in the flooded forests away from hunting to a greater reliance on fish.     

Spherical First Passage Time: A tool to investigate area-restricted search in three-dimensional movements

A better understanding of animal movements is of crucial importance for investigating numerous ecological issues. Developments in bio-logging technologies largely contributed to the observation and recording of animal displacements. Recently, several devices were developed to track animals in a three-dimensional space. However, given the larger number of variables, these advances generated new analytical problems and currently, few methods exist to analyse 3-D movements. In this study, we present a new technique, the Spherical First Passage Time (SFPT), to determine the scale of search behaviour in a volume. Building on the development of the First Passage Time (FPT) approach, SFPT measures the time required to cross a sphere along a 3-D path. We used simulations as they provide an opportunity to better understand processes involved in a system. Moreover, they offer the advantage of considerably increasing sample size in cases where empiric data remain scarce. However, in order to be more realistic, simulations were constrained within the physiological and behavioural features inherent to a diving animal, in this case beluga whales. First, we modelled three-dimensional movements as a correlated random walk for which the vertical and horizontal dimensions were considered simultaneously. One restricted search event was included in each simulation. Spatial scales obtained with the SFPT approach were compared to those obtained from the classical FPT analysis over the corresponding horizontal path. Results indicate a significant difference between the two approaches, suggesting that, in most cases, an approach in 2-D misrepresents spatial scale of search behaviour occurring in 3-D. Although we tested the SFPT with the example of a diving marine mammal, we argue that this method is applicable for all animals moving in a three-dimensional space.     

An assessment of benthic condition in several small watersheds of the Chesapeake Bay, USA

We examined benthic condition in three small watersheds in the Chesapeake Bay. Characterization of benthic condition was based on the combined measurements of benthic fauna, sediment toxicity, and sediment contaminant loads. Significant differences between watersheds were detected for sediment contaminant concentrations and water quality. The intensity of benthic impairment was greatest in the river surrounded by the most developed watershed. Spatial patterns of benthic condition were detected within all three watersheds. In contrast to current, intense focus on nutrient pollution in the Chesapeake Bay, qualitative comparison of our findings to land-use patterns supports findings of other studies that suggest benthic condition in tributaries of the Chesapeake Bay may more closely relate to urbanization than agricultural land uses.     

Hazards from carbon dioxide capture, transport and storage

Carbon capture and storage (CCS) is a developing technology which raises a number of issues in terms of safety. CCS involves a chain of processes comprising capture of carbon dioxide, transport and injection into underground storage. In work carried out for the IEA Greenhouse Gas R&D Programme, a number of high-level hazard identification (HAZID) studies have been performed with the help of industry experts. The HAZIDs considered a carbon capture and storage chain involving capture, pipeline transport and injection. HAZID has been performed at a high-level for such a CCS chain with three types of capture technology and using pipeline transport. It is hoped that the results of the HAZID studies will be of use to those carrying out CCS projects, but should not be a substitute for them carrying out a full suite of integrated hazard management processes. A number of example hazards have been described to raise awareness of the range of hazards in a CCS process and to identify barriers which could prevent, minimise, control or mitigate CCS hazards. Bow-tie diagrams have been produced to record the information from this study and to organise it in a systematic way so that it is far less likely that contributors to and mitigators of hazards will be missed. The diagrams are available in Excel spreadsheet format so that they can be used as the starting point for development by specific CCS projects. CCS technology is still advancing and a number of knowledge gaps in terms of safety have been identified which require further development.