Determination of atrazine in surface waters by combination of POCIS passive sampling and ELISA detection

Polar organic compound integrative samplers (POCIS) in combination with instrumental techniques such as LC-MS-MS were previously used to monitor environmental pollutants but the performance of alternative immunochemical methods such as ELISA (enzyme-linked immunosorbent assay) has been explored less. In the present study, POCIS technology was applied to surface water sampling in the Czech Republic, and ELISA was used as a detection technique for the herbicide atrazine. In the first study, 28 samples from streams around small municipal waste water treatment plants (WWTPs) were collected using two different devices (POCISpest and POCISpharm) over the course of 21 days. Elevated atrazine concentrations (up to 25 ng per POCIS) were found in samples down-stream of WWTPs. This observation was also confirmed in another two year study (4 sampling periods) investigating 7 river sites around a major city of Brno as well as the inlet and outlet of the city's WWTP. High atrazine levels were systematically determined at the outlet from the WWTPs (120-605 ng per POCIS). A decreasing trend in the atrazine concentrations in rivers around the city of Brno has been observed, with the highest levels observed within the first sampling period in spring 2007 (100-600 ng per POCIS, with an extreme value of 2760 ng per POCIS). Results of the atrazine ELISA were closely correlated with LC-MS/MS, which confirmed good applicability of ELISA as a cost-effective screening tool.     

Stagnant surface water bodies (SSWBs) as an alternative water resource for the Chittagong metropolitan area of Bangladesh: physicochemical characterization in terms of water quality indices

The concern over ensuing freshwater scarcity has forced the developing countries to delve for alternative water resources. In this study, we examined the potential of stagnant surface water bodies (SSWBs) as alternative freshwater resources in the densely populated Chittagong metropolitan area (CMPA) of Bangladesh??where there is an acute shortage of urban freshwater supply. Water samples were collected at 1-month intervals for a period of 1 year from 12 stations distributed over the whole metropolis. Samples were analyzed for pH, water temperature (WTemp), turbidity, electrical conductivity (EC), total dissolved solids, total solids, total hardness, dissolved oxygen (DO), chloride, orthophosphates, ammonia, total coliforms (TC), and trace metal (Cd, Cr, Cu, Pb, As, and Fe) concentrations. Based on these parameters, different types of water quality indices (WQIs) were deduced. WQIs showed most of CMPA-SSWBs as good or medium quality water bodies, while none were categorized as bad. Moreover, it was observed that the minimal water quality index (WQI_m), computed using five parameters: WTemp, pH, DO, EC, and turbidity, gave a reliable estimate of water quality. The WQI_m gave similar results in 72% of the cases compared with other WQIs that were based on larger set of parameters. Based on our finding, we suggest the wider use WQI_m in developing countries for assessing health of SSWBs, as it will minimize the analytical cost to overcome the budget constraints involved in this kind of evaluations. It was observed that except turbidity and TC content, all other quality parameters fluctuated within the limit of the World Health Organization suggested standards for drinking water. From our findings, we concluded that if the turbidity and TC content of water from SSWBs in CMPA are taken care of, they will become good candidates as alternative water resources all round the year.     

In vitro activity of antimicrobial agents against Pseudomonas tolaasii, pathogen of cultivated button mushroom

In vitro antibacterial activity tests of seven biofungicides (Ekstrasol, Bisolbisan, Bisolbifit, Serenade, Sonata, Timorex, F-Stop) and two disinfectants (colloidal silver alone and in combination with hydrogen peroxide) against the Pseudomonas tolaasii strain (NS3B6) were carried out by the disc-diffusion, broth microdilution and broth macrodilution method. Biofungicides tested in this study did not exhibit any antimicrobial activity in neither one of the methods used. Disc diffusion method revealed high sensitivity of the tested P. tolaasii strain to Ecocute based on colloidal silver and hydrogen peroxide. Both microdilution and macrodilution methods identified the same MICs and MBCs of Ecocute (0.19 mg/L) for P. tolaasii strain. MICs and MBCs values of silver alone were much higher (10 mg/L) compared to silver in combination with hydrogen peroxide.     

Designing green plasticizers: influence of molecular geometry on biodegradation and plasticization properties

The plasticizer di (2-ethylhexyl) phthalate (DEHP) and its metabolites are considered ubiquitous contaminants, which have a range of implications on the environment and human health. This work considered several alternative compounds with structural features similar to DEHP. This added to the understanding of why DEHP is so poorly biodegraded once it enters the environment. These alternative compounds were based on 2-ethylhexyl diesters of maleic acid (cis-isomer), fumaric acid (trans-isomer) and succinic acid (saturated analogue). The rates of biodegradation by the common soil bacterium Rhodococcus rhodocrous were shown to be dependent on the structure of the central unit derived from the diacid used to make the ester. The diacid components of DEHP and the maleate both had a cis orientation and they were the two that were slow to biodegrade. Plasticizing properties were also compared and, because the ester of the saturated succinic acid was degraded quickly and also had good plasticizing properties, it was concluded that the succinic esters of straight chain alcohols would make the best green plasticizers. The maleate ester had excellent plasticizing properties but this is mitigated by a significant resistance to biodegradation.     

The effect of bee pollen on secretion activity, markers of proliferation and apoptosis of porcine ovarian granulosa cells in vitro

The general objective of this in vitro study was to examine the effect of bee pollen on the release of insulin-like growth factor I (IGF-I) and steroid hormone progesterone, and expression of markers of proliferation (PCNA) and apoptosis (caspase-3) in porcine ovarian granulosa cells. Concentrations of IGF-I and progesterone were determined by RIA method and expression of PCNA and caspase-3 by immunocytochemistry. Bee pollen addition at the dose of 10 ng/mL significantly (P<0.05) inhibited IGF-I release by porcine ovarian granulosa cells. This growth factor was not influenced by 100 and 1000 ng/mL doses of bee pollen. Progesterone release by cells was not influenced by bee pollen addition at the doses of 10, 100 and 1000 ng/mL as used in our study. Similarly expression of PCNA and caspase-3 was not affected by bee pollen addition. The present study shows dose-dependent regulation of IGF-I by experimental bee pollen addition in vitro. Progesterone release, expression of PCNA and caspase-3 in porcine ovarian granulosa cells was not induced by pollen. Our results contribute to new insights regarding the possible effect of bee pollen on IGF-I release, which is important for regulation of porcine ovarian functions.     

Toxicity of mancozeb,chlorothalonil, captan,fluopyram, boscalid,and difenoconazole to Didymella applanata isolates from Serbia

Field isolates of Didymella applanata, the causal agent of spur blight of raspberry, were evaluated in vitro for their sensitivity to mancozeb, chlorothalonil, captan, fluopyram, boscalid and difenoconazole. A total of 10 isolates, collected during 2013 at five localities in the major raspberry growing region in Serbia, and characterized as copper hydroxide, dithianon, and tebuconazole (sensitive), pyraclostrobin (sensitive or highly resistant) and fluazinam (sensitive or moderately resistant), were used in this study. The EC₅₀ values for the isolates ranged from 1.33 to 2.88 mg L^?1 for mancozeb, from 3.18 to 6.65 mg L^?1 for chlorothalonil, from 15.75 to 24.69 mg L^?1 for captan and from 1.80 to 8.20 mg L^?1 for fluopyram. The narrowest range of EC₅₀ values was recorded for difenoconazole (0.23–0.49 mg L^?1), whereas the widest range was obtained for boscalid (4.49–49.25 mg L^?1). The calculated resistance factors showed that all D. applanata isolates were sensitive to mancozeb, chlorothalonil, captan, and difenoconazole. Four isolates were moderately resistant to boscalid, while three of them were also moderately resistant to fluopyram. This finding of moderately resistant isolates to these SDHI fungicides indicates a possible cross-resistance which should be clarified in further investigations.     

Effect of buffer strips and soil texture on runoff losses of flufenacet and isoxaflutole from maize fields

The influence of buffer strips and soil texture on runoff of flufenacet and isoxaflutole was studied for two years in Northern Italy. The efficacy of buffer strips was evaluated on six plots characterized by different soil textures; two plots had Riva soil (18.6% sand, 63.1% silt, 18.3% clay) while the remaining four plots had Tetto Frati (TF) soil (37.1% sand, 57% silt, 5.9% clay). Additionally, the width of the buffer strips, constituted of spontaneous vegetation grown after crop sowing, was also compared for their ability to abate runoff waters. Chemical residues in water following runoff events were investigated, as well as their dissipation in the soil. After the first runoff events, concentrations of herbicides in water samples collected from Riva plots were as much as four times lower in waters from TF plots. On average of two growing seasons, the field half-life of flufenacet in the upper soil layer (5 cm) ranged between 8.1 and 12.8 days in Riva soil, 8.5 and 9.3 days in TF soil. Isoxaflutole field half-life was less than 1 day. The buffer strip was very affective by the uniformity of the vegetative cover, particularly, at the beginning of the season. In TF plots, concentration differences were generally due to the presence or absence of the buffer strip, regardless of its width.     

Stabilization/Solidification of Salt from a Waste Incinerator

ABSTRACT

A laboratory procedure was developed and verified for stabilizing salt produced by an industrial waste incinerator. This procedure is based on salt stabilization by means of an asphalt binder. Conductivity values and relevant anion contents in leachates of stabilized waste with an asphalt coating were near zero. The pH value of these leachates equaled the pH value of the water used, so that the stabilized waste salt represented inert material, posing no environmental hazard. An unusually significant reduction in the volume of processed salt occurred during stabilization. After compacting under 10.4 MPa pressure, the volume of test specimens was almost 55% smaller than the initial salt volume. In practice, this would mean more than a doubling of landfill waste capacity. Volume reduction was successfully explained by means of a mathematical model.     

Mercury deposition/accumulation rates in the vicinity of a lead smelter as recorded by a peat deposit

Mercury (Hg) concentration profiles and historical accumulation rates were determined in three ²¹⁰Pb-dated cores from a peat deposit in the vicinity of a lead (Pb) smelter at Příbram, Czech Republic. The Hg concentrations in peat samples ranged from 66 to 701 μg kg⁻¹. Cumulative Hg inventories from each core (for the past 150 yr) varied by a factor of 1.4 (13.6–18.5 mg Hg m⁻²), indicating variations of net Hg accumulation rate within the peat deposit. Historical changes in vegetation cover (leading to variable interception by trees) are probably responsible for this variation in space and time. The uncorrected Hg accumulation rates peaked between the 1960s and 1980s (up to 226 μg m⁻² yr⁻¹). Recent findings show that Hg records from peat tend to overestimate historical levels of Hg deposition. Therefore we used the mass loss compensation factor (MLCF) to normalize Hg accumulation rates. These corrected Hg accumulation rates were significantly lower (maximum 129 μg m⁻² yr⁻¹) and better corresponded to changes in historical smelter emissions, which were highest in the 1960s. The agreement between the corrected Hg accumulation rates in the uppermost peat sections (2–38 μg m⁻² yr⁻¹) and biomonitoring of atmospheric deposition by mosses in several recent years (4.7–34.4 μg m⁻² yr⁻¹) shows the usefulness of MLCF application on Hg accumulation in peat archives. However, the MLCF correction was unsuitable for Pb. The recent Pb deposition rates obtained by an independent biomonitoring study using mosses (0.5–127 mg m⁻² yr⁻¹) were better correlated with net Pb accumulation rates recorded in peat (7–145 mg m⁻² yr⁻¹) than with corrected rates obtained by the MLCF approach (1–28 mg m⁻² yr⁻¹).