Effect of Cross-Linking Waste Protein with Dialdehydes on Its Biodegradation Under Anaerobic Conditions

Most native polymers used in processing and application technologies are admittedly disposable from the environment in a biologic manner, but products possess low mechanical strength. One of the paths to increasing this attribute (if feasible) is their cross-linking, which may, however, affect their readiness to biodegradation. In the presented work this condition was observed on the example of waste protein (Hykol B) cross-linking by means of glutardialdehyde and glyoxal. Degree and course of cross-linking were determined through impedance spectroscopy. The objective of this work also was to obtain data for constructing a sensor capable of following the cross-linking course in real time, for potential industrial application of Hykol in continuous production. Impedance spectroscopy proved to be applicable even to this kind of material marked by considerable water content and exhibiting relatively high electric conductivity; so far it had been used only for materials of low conductivity. An aqueous environment inoculated with digested anaerobic sludge from a municipal wastewater treatment plant was selected for modeling anaerobic conditions. The relation was studied between cross-linking degree given by content of cross-linking agent (determined by impedance spectroscopy) and biodegradation degree under anaerobic conditions. It was confirmed that network density as given by quantity of added agent not only reduced breakdown degree but also slowed the course of the process. This fact is particularly obvious with cross-linking by means of glyoxal; network density is thus dependent on type of employed substance, which affect type and structure of created network. That not merely forms an obstacle during polymer swelling and dissolution but also prevents access of bacteria to source of metabolized organic carbon.     

Evaluation of the use of bioaccumulation and biological effects tools in caged mussels,within the European Water Framework Directive

Bioaccumulation and biological effects of pollution were assessed in mussels (Mytilus galloprovincialis) caged for one month at three sites in the Oiartzun estuary (south-eastern Bay of Biscay, Spain) with the aim of evaluating their usefulness within the investigative monitoring defined in the European Union Water Framework Directive (WFD). The highest concentrations of organic contaminants determined in mussels' tissue were detected towards the inner part of the estuary but no gradient pattern was found for metal bioaccumulation. Population fitness responses measured as condition index, stress on stress and gonad index were similar in all caged mussels and did not follow the organic pollution gradient. However, biomarkers determined at tissue, cell and protein level (histopathology, micronuclei frequency, malondialdehyde levels and vitellogenin-like protein levels) revealed a higher stress syndrome at the inner part of the estuary showing signs of genotoxicity, oxidative stress and endocrine disruption. Overall, the integrated chemical–biological approach in connection with mussel caging technique proved to be a useful tool to assess environmental pollution, allowing a better understanding of the cause–effect relationship within the investigative monitoring defined in the WFD.     

European monitoring for raptors and owls: state of the art and future needs

Sixty-four percent of the 56 raptor and owl species that occur in Europe have an unfavorable conservation status. As well as requiring conservation measures in their own right, raptors and owls function as useful sentinels of wider environmental "health," because they are widespread top predators, relatively easy to monitor, and sensitive to environmental changes at a range of geographical scales. At a time of global acknowledgment of an increasing speed of biodiversity loss, and new, forward-looking and related European Union biodiversity policy, there is an urgent need to improve coordination at a pan-European scale of national initiatives that seek to monitor raptor populations. Here we describe current initiatives that make a contribution to this aim, particularly the current "MEROS" program, the results of a questionnaire survey on the current state of national raptor monitoring across 22 BirdLife Partners in Europe, the challenges faced by any enhanced pan-European monitoring scheme for raptors, and some suggested pathways for efficiently tapping expertise to contribute to such an initiative.     

Physiological responses to atmospheric fluorine pollution in transplants of Pseudoscleropodium purum

Transplants of the moss Pseudoscleropodium purum were placed under shade, and with an auto irrigation system, at five sites in the surroundings of an aluminium smelter to enable study of the possible effects of F on different physiological parameters after exposure periods of 28 and 56 days. Reference thresholds for the content of Chl a+b and for the pigment indexes of Chl a/b and D665/D665a were established with the data corresponding to 22 transplants of each duration of exposure, at seven sites where there was little or no contamination by F. The highest determination coefficients for the levels of F in moss were those obtained for chlorophyll content (Chl a+b) and the D665/D665a pigment index, with the effects being most evident in the transplants exposed to the contamination for 56 days.     

Sorption of fenamiphos to different soils: the influence of soil properties

Fenamiphos (0-ethyl-0(3-methyl-4-methylthiophenyl)-isopropylamido-phosphate) is a widely used nematicide and insecticide in bowling greens and agriculture, but information on its sorption including its metabolites is limited. Hence, the sorption of fenamiphos (nematicide) and its major degradation products fenamiphos sulfoxide (FSO) and fenamiphos sulfone (FSO2) were determined in thirteen contrasting soils collected from Australia and Ecuador. The sorption coefficients (Kd) exhibited a wide range of variation from 2.48 to 14.94 L/Kg for fenamiphos; from 0 to 7.42 L/Kg for FSO and from 0 to 9.49 L/Kg for FSO2. The sorption affinity of the three compounds for all soils tested was as follows: fenamiphos > fenamiphos sulfone > fenamiphos sulfoxide. The results showed that the sorption of fenamiphos and its metabolites in some soils is very low, and in one case is nonexistant for the metabolites. This is of particular concern as due to its low sorption coefficient, the compound could easily migrate and contaminate water bodies. Fenamiphos and its oxidation products have been reported to be highly toxic to aquatic invertebrates and therefore, the information generated in this study assumes great importance in the risk assessment of fenamiphos and its metabolites in the environment.     

Semi-parametric statistical approaches for space-time process prediction

The problem of estimation and prediction of a spatial-temporal stochastic process, observed at regular times and irregularly in space, is considered. A mixed formulation involving a non- parametric component, accounting for a deterministic trend and the effect of exogenous variables, and a parametric component representing the purely spatio-temporal random variation is proposed. Correspondingly, a two-step procedure, first addressing the estimation of the non- parametric component, and then the estimation of the parametric component is developed from the residual series obtained, with spatial-temporal prediction being performed in terms of suitable spatial interpolation of the temporal variation structure. The proposed model formula-tion, together with the estimation and prediction procedure, are applied using a Gaussian ARMA structure for temporal modelling to space-time forecasting from real data of air pollution concentration levels in the region surrounding a power station in northwest Spain.     

Preparation of a porous clay heterostructure and study of its adsorption capacity of phenol and chlorinated phenols from aqueous solutions.

A porous clay heterostructure (PCH) from a Mexican clay was prepared and characterized, and its aqueous phenol and dichlorophenols (DCPs) adsorption capacities were studied using a batch equilibrium technique. The PCH displayed a surface area of 305.5 m2/g, 37.2 A average porous diameter, and a basal space of 23.2 A. The adsorption capacity shown by the PCH for both phenol and DCPs from water (14.5 mg/g for phenol; 48.7 mg/g for 3,4-DCP; and 45.5 mg/g for 2,5-DCP) suggests that the PCH has both hydrophobic and hydrophilic characteristics, as a result of the presence of silanol and siloxane groups formed during the pillaring and calcination of the PCH. The values of maximal adsorption capacity for dichlorophenols were higher than those reported for aluminum pillared clays and some inorgano-organo clays and comparable with some ionic exchange resins.     

Comparison of Soil Extraction Isotherms of Soil Samples Saturated With Nonpolar Liquids

In multiphase systems capillary pressures play a significant role on fluid movement and retention. The facility to predict the effect of different thermal remediation strategies requires the knowledge of the effect of temperature on capillary pressure-saturation relationships in the soils. The objective of recent study was (a) to develop a technique for routinely measuring the pressure-saturation curves of soil samples saturated with a nonpolar liquid at different regulated temperatures (b) to build a database using the measured pressure-saturation curves and the physical, chemical properties of the model soils (c) to establish the dependence of nonaqueous phase liquid retention on the soil properties and the temperature. The retention curves (extraction isotherms) with nonaqueous phase liquid were determined using a modified pressure plate extractor. The wetting phase was a non-aromatic hydrocarbon distillation product. Pressure plates were designed and constructed in the laboratory of our department. The temperature was held constant at 20, 40 and 60 ^∘C. Statistical analysis was performed involving selected soil parameters and the measured nonaqueous phase liquid retention data. The results show that knowing some easily measurable soil parameters (bulk density, particle size distribution, humus and lime content) we can estimate the nonaqueous phase liquid retention of the soils. The measured “extraction isotherms” provide essential information about the temperature-dependency of pressure-saturation curves.     

Modal choice for transportation of hazardous materials: the case of land modes of transport of bio-ethanol in Brazil

Performance evaluation is important in managing freight transport. The transport of certain products, especially those that are hazardous, can have significant financial and socio-environmental impacts. This article presents an application of the modal choice method (MCM) to establish an order of priority among the alternatives considered to carry a determined hazardous product. After a research of the literature on the concepts and development of the proposed method, we consulted experts about their experiences and knowledge, to determine a set of relevant attributes for the evaluation process. We then applied this method to the specific case of the Brazilian bio-ethanol industry, to demonstrate the potential of using the MCM as a tool to support make decisions. We can conclude that highway transport, though the most often used, is not the best compared to trains or pipelines (or combinations of any of the three) from a socio-environmental standpoint. Alternatives with longer pipeline segments are the most suitable to replace the current practice in environmental terms.