南水北调中线不同调水方案下的汉江水华发生概率分析

为评估南水北调中线工程对汉江中下游水华的影响，从汉江水华的成因机理分析入手，提出了汉江水华发生概率的计算模型．该模型由河流一维水动力学模型、水体富营养化模型以及随机数生成模型组成，它不仅可以模拟汉江水华的发生机理，而且可以对诱发水华的各种因子进行随机抽样组合，从而求出中线调水不同方案实施后汉江水华的发生概率．计算结果表明，在现状情况下汉江水华的发生概率为9．2％，南水北调中线各调水方案（无引江济汉工程）实施后，汉江水华发生的概率将有一定程度的增加，而如果调水方案与引江济汉工程同时兴建将大大减少汉江水华发生的概率．最后提出建议，汉江自身的水污染治理是减少水华发生概率的最根本措施，而丹江口水库和引江济汉工程的联合调度将会减小汉江水华发生的概率．     

喷射成形制造工艺

喷射成形是一种先进的材料制备技术,该技术具有近终形制造的特点,近年来已广泛应用于研究和开发多种高性能快速凝固材料.文中介绍了喷射成形工艺过程、特点,并回顾了喷射成形工艺的发展历程及现在所达到的技术水平.     

石化企业烟气脱硫技术选择和产业化建议

结合石化企业自备电厂锅炉的运行特点，分析当前各种脱硫工艺技术的适应性，提出发展循环镁法脱硫技术的必要性和迫切性，并对石化脱硫产业的健康发展提出建议。     

冷挤大型法兰面螺母的工艺研究

以大型法兰面螺母为例 ,论述了用无缝钢管冷挤大型法兰面螺母工艺的可行性     

Design of policy mechanism to promote cleaner production in China

ＩｎｔｒｏｄｕｃｔｉｏｎＣｌｅａｎｅｒｐｒｏｄｕｃｔｉｏｎ (ＣＰ)ｈｏｌｄｓｇｒｅａｔｐｒｏｍｉｓｅａｓａｎｅｆｆｅｃｔｉｖｅｓｔｒａｔｅｇｙｉｎｔｈｅｆａｃｅｏｆｄｏｕｂｌｅｃｈａｌｌｅｎｇｅｓｏｆｅｎｖｉｒｏｎｍｅｎｔａｌｐｒｏｔｅｃｔｉｏｎａｎｄｅｃｏｎｏｍｉｃｄｅｖｅｌｏｐｍｅｎｔ.Ｉｎ 1993,ａｄｅｍｏｎｓｔｒａｔｉｏｎｐｒｏｊｅｃｔ (Ｂ 4ｐｒｏｊｅｃｔ) ,ｄｅｓｉｇｎｅｄａｎｄｅｘｅｃｕｔｅｄｂｙｔｈｅＳｔａｔｅＥｎｖｉｒｏｎｍｅｎｔａｌＰｒｏｔｅｃｔｉｏｎＡｄｍｉｎｉｓｔｒａｔｉｏｎ (…     

以运行费用函数为基础制定超标污水收费标准

根据现行的上海市和国家的超标污水征收标准的特点，提出制定新标准的５项原则。新标准的制定方案中，确定以ｙ＝ａ．ｘ＾β费用函数基础；用数理统计等方法，通过对污染排放标准，处理深度和处理费用３者关系的处理，得出二类污染物中，１级收费标准比现行２级收费标准上升３０％、２级收费采用现行标准、３级收费标准比现行标准下降２０－３０％；并提出污染物收费的计算公式，经对方案的论证和测算，说明其有效好的可行性。     

Zelluläre Wirkungen der ultravioletten Komponente des Sonnenlichts

The discussion on the possible increase of solar UV on earth due to the destruction of the stratospheric ozone has led to a renewed interest in the action of ultraviolet radiation on biological systems. The paper deals with changes at the cellular level stressing particularly molecular alterations in deoxyribonucleic acid, the carrier of genetic information. The most important repair processes by which lesions are removed or bypassed are described. It is also discussed whether the effectivity of a complex spectrum can be predicted on the basis of measurements with monochromatic radiation. Furthermore, possible consequences on human health are outlined which may be derived from cellular studies.     

Prenatal diagnosis of the fragile X using thymidine induction

Eleven pregnancies in ten patients at risk for the fragile X were monitored by amniocentesis or chorion villus biopsy and induction of the fragile site using thymidine, methotrexate and FUdR. Three female fetuses and one male fetus were found to have the fragile X. The results obtained using thymidine induction were superior to those using methotrexate induction and probably better than those obtained using FUdR induction.     

Hydrogen storage and distribution systems

Hydrogen storage and transportation or distribution is closely linked together. Hydrogen can be distributed continuously in pipelines or batch wise by ships, trucks, railway or airplanes. All batch transportation requires a storage system but also pipelines can be used as pressure storage system. Hydrogen exhibits the highest heating value per weight of all chemical fuels. Furthermore, hydrogen is regenerative and environment friendly. There are two reasons why hydrogen is not the major fuel of toady’s energy consumption: First of all, hydrogen is just an energy carrier. And, although it is the most abundant element in the universe, it has to be produced, since on earth it only occurs in the form of water. This implies that we have to pay for this energy, which results in a difficult economic task, because since the industrialization we are used to consuming energy for free. The second difficulty with hydrogen as an energy carrier is the low critical temperature of 33 K, i.e. hydrogen is a gas at room temperature. For mobile and in many cases also for stationary applications the volumetric and gravimetric density of hydrogen in a storage system is crucial. Hydrogen can be stored by six different methods and phenomena: high pressure gas cylinders (up to 800 bar), liquid hydrogen in cryogenic tanks (at 21 K), adsorbed hydrogen on materials with a large specific surface area (at T < 100 K), absorbed on interstitial sites in a host metal (at ambient pressure and temperature), chemically bond in covalent and ionic compounds (at ambient pressure), oxidation of reactive metals e.g. Li, Na, Mg, Al, Zn with water. These metals easily react with water to the corresponding hydroxide and liberate the hydrogen from the water. Finally, the metal hydroxides can be thermally reduced to the metals in a solar furnace.