浅淡大阻力配水系统的技术改造

大阻力配水系统滤池由于采用穿孔钢管配水 ,而穿孔钢管容易腐蚀、结垢 ,导致孔眼堵塞 ,再若高位水箱反冲强度掌握不当 ,会使承托层和滤料冲洗混乱 ,滤池不能正常运行。针对这一问题 ,湖州市自来水公司与浙江省玉环净化厂联手 ,利用该厂滤板、滤头及有关专利新技术 ,对自来水公司的 6万t/d快速滤池进行改造 ,运行半年来 ,取得了满意的结果。     

云南省经济增长与能源消耗的计量模型研究

根据云南省1985~2003年能源消耗的统计数据以及人均GDP统计数据,分析人均GDP与能源消耗之间的相关关系,选取相关性较好的能耗指标(煤炭消耗量、石油消耗量、天然气消耗量、电力消耗量)建立两者之间的计量模型。并在此基础上分析能源消耗与人均GDP增长的关系。经研究发现,云南省经济增长与能源消耗呈类似于EKC的倒U型曲线,且曲线尚未到达转折点,能源消耗量随着经济增长将持续增长。有必要采取有利措施倡导“循环经济”、“绿色GDP”等使曲线走势向良性方向发展。     

A Simulation of Temporal and Spatial Variations in Carbon at Landscape Level: A Case Study for Lake Abitibi Model Forest in Ontario,Canada

Using a case study of the Lake Abitibi Model Forest (LAMF), this study aims to assess the temporal and spatial variability in carbon storage during 1990–2000, and to present a comprehensive estimation of the carbon budget for LAMF's ecosystems. As well, it provided the information needed by local forest managers to develop ecological and carbon-based indicators and monitor the sustainability of forest ecosystems. Temporal and spatial carbon dynamics were simulated at the landscape level using ecosystem model TRIPLEX1.0 and Geographical Information System (GIS). The simulated net primary productivity (NPP) and carbon storage in forest biomass and soil were compared with field data and results from other studies for Canada's boreal forests. The results show that simulated NPP ranged from 3.26 to 3.34 tC ha⁻¹ yr⁻¹ in the 1990s and was consistent with the range measured during the Boreal Ecosystem-Atmosphere Studies (BOREAS) in central Canada. Modeled NPP was also compared with the estimation from remote sensing data. The density of total above-and belowground biomass was 125.3, 111.8, and 106.5 tC ha⁻¹ for black spruce, trembling aspen, and jack pine in the LAMF ecosystem, respectively. The total carbon density of forested land was estimated at 154.4 tC ha⁻¹ with the proportion of 4:6 for total biomass and soil. The analysis of net carbon balance of ecosystem suggested that the LAMF forest ecosystem was acting as a carbon sink with an allowable harvest in the 1990s.     

水环境中病毒污染及监测问题探讨

水环境中广泛存在着病毒污染,而现行的水环境标准对于病毒缺乏相关的规定,许多病毒引起的疾病介水传播,这就可能造成致病微生物对人体健康的潜在威胁.在此,阐述水环境中病毒的危害,探讨可行的水体中病毒的指示物、监测手段,以及对病毒的灭活等相关问题.     

我国海洋灾害经济损失评估模型研究

针对目前我国海洋灾害给海洋环境及造成损害的实际情况，运用环境经济学及系统动力学的理论和方法，并在溢油模型及ＧＩＳ的支持下，首次建立了用一系列密切相关的子模块来评估经济损失的数学模型。它对于促进我国海洋灾害经济损失评估的定量化进程将起到一定的作用。     

Cells of the connective tissue differentiate and migrate into pollen sacs

In angiosperms, archesporial cells in the anther primordium undergo meiosis to form haploid pollen, the sole occupants of anther sacs. Anther sacs are held together by a matrix of parenchyma cells, the connective tissue. Cells of the connective tissue are not known to differentiate. We report the differentiation of parenchyma cells in the connective tissue of two Gordonia species into pollen-like structures (described as pseudopollen), which migrate into the anther sacs before dehiscence. Pollen and pseudopollen were distinguishable by morphology and staining. Pollen were tricolpate to spherical while pseudopollen were less rigid and transparent with a ribbed surface. Both types were different in size, shape, staining and surface architecture. The ratio of the number of pseudopollen to pollen was 1:3. During ontogeny in the connective tissue, neither cell division nor tetrad formation was observed and hence pseudopollen were presumed to be diploid. Only normal pollen germinated on a germination medium. Fixed preparations in time seemed to indicate that pseudopollen migrate from the connective tissue into the anther sac.     

中国PM_(2.5)污染状况和污染特征的研究

近１０ 余年来在中国的城市地区和清洁地区进行了ＰＭ２－５ 的采集和分析，其中包括ＰＭ２－５ 的质量浓度、离子和元素成分、酸度和酸化缓冲能力以及来源解析，研究结果表明，中国大部分地区ＰＭ２－５ 的污染较重，不论是质量浓度，还是各种主要成分浓度，在ＴＳＰ 和ＰＭ１０ 中都占有很高的比重，而ＰＭ２－５ 的酸度也远远高于ＴＳＰ 和ＰＭ１０ ，特别是近年来ＰＭ２－５ 污染还有相对加剧的趋势。     

室内培养底栖端足类日本大螯蜚饵料研究

本文在实验条件下探讨了５种饵料对海洋底栖端足类日本大螯蜚的培养效果。实验指标为存活率，生长速度，日增长率和发育状况。结果表明，青岛大扁藻与新月菱形藻１：１混合液的培养效果最佳，合成饲料是较好的补充饵料，螺旋藻粉不宜作为日本大螯蜚的培养饵料。动物性饵料培养效果不如植物性饵料，但对日本大螯蜚的早期快速成长具有一定的促进作用。     

方轧件在椭圆孔型中轧制温度场的三维有限元分析

应用MARC/autoforge有限元软件对方轧件在椭圆孔型中的轧制温度场进行了热力耦合模拟.研究了模拟过程中的传热边界条件,分析了轧制前和轧制过程中轧件中温度场的分布和变化规律.模拟计算结果和实验结果的比较说明二者基本是相符的.