Role of Crosslinker on the Biodegradation Behavior of Starch/Polyvinylalcohol Blend Films

The effect of crosslinkers on the biodegradation behavior of starch/polyvinyl alcohol (PVA) blend films was investigated by weight loss study, Scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). Starch/PVA films were prepared by solution casting method and 5 weight% of four different crosslinking agents like epichlorohydrin, formaldehyde, zinc oxide and borax were used in four different sets to crosslink the films. These crosslinked starch/PVA films were biodegraded in compost. Weight loss study showed that crosslinking retarded the biodegradation of the films in the first 15?days, but after that, there was a significant increase in weight loss. The DSC analysis revealed that the consumption of starch and consequent rearrangement of the PVA molecules were distinctly different in the crosslinked films due to the effect of different crosslinking agents.     

Influence of the organophosphorus insecticide phosphamidon on lentic water

The inland freshwater resources are being increasingly subjected to heavy stress as a result of indiscriminate dumping of industrial wastes, domestic sewage and agricultural run-off causing deterioration of the water quality and adverse impact on aquatic biota. Pesticides drained to the aquatic environment are primarily of agricultural origin. Phosphamidon (widely used organophosphate pesticide in paddy field) significantly reduced dissolved oxygen (DO) at 1.8 mg/l exposure and reduced alkalinity at 0.9 and 1.8 mg/l. Hardness also reduced gradually but not significantly. Free carbondioxide was increased significantly at 1.8 mg/l of the insecticide compared to control. The insecticide had no influence on pH and temperature. There was maximum reduction of phytoplankton and zooplankton population at 1.8 mg/l of phosphamidon. Though gradual reduction of plankton community was also noticed at different lower concentrations of pesticides but in case of phytoplankton an abrupt reduction (about 50% of the control) was observed. The normal behaviour and feeding rate of air breathing teleost, Channa punctatus was also hampered. Therefore, phosphamidon even at low concentrations may create disorders in the aquatic ecosystem.     

Effects of DDT on the growth of crop plants

The effects of DDT on the germination and growth of plants were studied using many crop species. Of the species tested, oil-rich seeds of plants, such as peanut (Arachis hypogaea) and mustard (Brassica juncea), were more prone to DDT induced inhibition of germination and subsequent plant growth than cereals, pulses and fibre crops, like rice (Oryza sativa), barley (Hordeum vulgare), mung bean Vigna radiata), pigeon pea (Cajanus cajan) and cotton (Gossypium hirsutum). Studies with (14)C labelled DDT showed that insecticide uptake by seeds was directly proportional to seed size. However, there was no direct relationship between DDT uptake by the seeds and its subsequent translocation to the growing regions or the degree of growth inhibition. Data suggest that oil content of the seeds per se has a bearing on the susceptibility or tolerance of a plant to DDT. It is suggested that lipids of the plant cell solubilize and disperse DDT in the cytoplasm, which, in turn, affects normal metabolism within the cell.     

Effect of mercury and methyl parathion on the ovaries of Labeo rohita (Ham)

Adult pre-spawning fish Labeo rohita were sublethally (1/5th 96h LC50) exposed to mercuric chloride and metacid-50 (methyl parathion). Accumulation of mercury and methyl parathion was studied and it was found that pre-spawning ovary appears as a potent organ for deposition of both the pollutants. RNA/DNA ratio of the control and treated fish were studied. It was found that the signifcant decrease in RNA/DNA ratio occurs after 9 and 30 days of exposure for mercury and 30 days for methyl parathion. Fluorescence microscopic studies by acridine orange staining method were also performed to show how much it is related to biochemical alterations. In some cases loss of metachromasia is correlated with the fall in RNA/DNA ratio. Some other abnormalities like fall in stage II: stage I oocyte ratio and necrosis was also observed.     

The role of burnout syndrome as a mediator for the effect of psychosocial risk factors on the intensity of musculoskeletal disorders: a structural equation modeling approach

This study examined the hypothesis that burnout syndrome mediates effects of psychosocial risk factors and intensity of musculoskeletal disorders (MSDs) among hospital nurses. The sample was composed of 415 nurses from various wards across five hospitals of Iran's Hamedan University of Medical Sciences. Data were collected through three questionnaires: job content questionnaire, Maslach burnout inventory and visual analogue scale. Results of structural equation modeling with a mediating effect showed that psychosocial risk factors were significantly related to changes in burnout, which in turn affects intensity of MSDs.     

Heavy metals in water of the rivers Hooghly and Haldi at Haldia and their impact on fish

The paper deals with the measurement of five heavy metals viz., Cd, Cu, Mn, Pb and Zn in water of the rivers Hooghly and Haldi at Haldia during June 1999 to October 2002. The industrial effluent out fall (OF) at Patikhali, Haldia was also taken as sampling site along with above out fall (AOF) and below out fall (BOF) sites. Most of the metals exhibited their least concentration at the sampling site above the Haldia industrial area of river Hooghly. The average concentrations of the studied metals were Cd 2-14, Cu 5-19, Mn 8-88, Pb 17-41 and Zn 22-37 microg l(-1). Comparison of the data with the Criterion Continuous Concentration (CCC) of USA revealed that Cd, Cu and Pb were the pollutants present at alarming level to disturb the aquatic life process in the zone. The effect was found to reflect on the tissue level aberrations in the residential fishes. The other two metals viz., Mn and Zn were probably less harmful to the aquatic ecosystem. In India, necessity is felt to develop the CCC values, which will be more appropriate for protection of aquatic environment than comparing with drinking water standards.     

Carbonaceous aerosol emissions from India

Budget estimate for carbonaceous aerosols including black carbon (BC) and organic carbon, emitted from the combustion of various fuels, is very important for regional climate studies. Emission factors for carbonaceous aerosols from bio-fuels and soft coke were determined in a controlled combustion study. The emission factors thus obtained along with those available for other fossil fuels consumed in different sectors have been applied to assess the budget for carbonaceous aerosols from India. Preliminary calculations give a range of 1.6–1.8 Tg of carbonaceous aerosols that include 0.4–1.4 Tg of BC. A major (80%) portion of carbonaceous aerosols emitted from India is found to originate from the use of biomass for energy as 70–80% of energy requirement in rural India is met by combustion of traditional bio-fuels.     

Chapter two: methodologies for characterisation of combustion sources and for quantification of their emissions

Emissions from the combustion of biomass and fossil fuels result in generation of a large number of particle and gaseous products in outdoor and/or indoor air, which create health and environmental risks. Of particular importance are the very small particles that are emitted in large quantities from all the combustion sources, and that could be potentially more significant in terms of their impact on health and the environment than larger particles. It is important to quantify particle emissions from combustion sources for regulatory and control purposes in relation to air quality. This paper is a review of particle characteristics that are used as source signatures, their general advantages and limitations, as well as a review of source signatures of the most common combustion pollution sources including road transport, industrial facilities, small household combustion devices, environmental tobacco smoke, and vegetation burning. The current methods for measuring particle physical characteristics (mass and number concentrations) and principles of methodologies for measuring emission factors are discussed in the paper as well. Finally, the paper presents the recommendations for the future techniques for measurements of combustion products.