Phosmet residues in an orchard and adjacent recreational area 1

Abstract

Two cover sprays of phosmet were applied to an orchard adjoining a camping area and a bird sanctuary with a resident goose population. Insecticide residues were monitored on orchard leaves, orchard ground cover, ground cover in the camp‐site and along the adjacent lakeshore. Despite attempts to minimize drift, significant spray residues were found outside the target area. Residues on ground cover and leaves were reduced by sprinkler irrigation subsequent to spray application.     

Land-use change and its socio-environmental impact in Eastern Ethiopia’s highland

The Alemaya district (Eastern Ethiopian highlands) is characterized by undulating physiographic features with arid, semi-arid, and humid climatic conditions. This study evaluated socio-environmental changes in land use and land cover during 1985–2011. Screen digitization on remotely sensed data (i.e., Landsat images from 1985 to 2011) was performed to produce 10 classes of land use and land cover. Then, final land-use maps were prepared using a geographic information system following field verification and accuracy assessment. The drying of water bodies, including the prominent lakes Alemaya, Adele, and Tinike, had been the most important environmental change observed. Degraded land, marsh, perennial cropland, and residential areas increased by 37, 438, 42, and 190 %, respectively, whereas grassland, plantation, shrubland, and temporal cropland decreased by 64, 11, 63, and 29 %, respectively. The increase in land degradation (+37 %), the other major observed problem, has made large areas unsuitable for agriculture and has reduced crop productivity. These land-use and land-cover changes have affected both the environment and the livelihoods of local residents; especially the issue related to land degradation requires urgent attention.     

Effect of different soil layers on porewater to remediate acidic surface environment at a close mine site

This paper describes the chemistry of porewater when constructing different soil layers on acidic weathered rock of a closed mine to remediate the surface environment. Three cases were set on a flat surface of the site, all under different layer systems. Case 1 was only composed of weathered rocks. A top neutralization layer was constructed on the weathered rocks in case 2, whereas both an upper low-permeable and middle neutralization layers were constructed on the weathered rocks in case 3. The low-permeable layer of 30?cm thick consists of clay, and the neutralization layer of 30?cm thick consists of the mixture of the weathered rock and calcium carbonate as a neutralizer. Porewater sampling systems and soil sensors to measure temperature, water content, and electrical conductivity were set at different depths. In case 1, steadily high concentrations of heavy metals were observed regardless of the depth, and the pH ranged from 2 to 4. In cases 2 and 3, a dramatic decrease in concentrations of heavy metals was observed, even below the neutralization layer. For both cases, pH values were circumneutral. There were no significant seasonable changes in heavy metals concentrations and pH of porewater by considering the temperature and precipitation. In addition, the water content of the layers in case 3 fluctuated more mildly than that in cases 1 and 2, indicating that the low-permeable layer reduced the rate of infiltration. Therefore, a significant reduction in the load of heavy metals released from the site can be achieved by both implementing neutralization and low-permeable layers.     

A comparative study on the autoxidation of dimethyl ether (DME) comparison with diethyl ether (DEE) and diisopropyl ether (DIPE)

The Japanese government is planning to introduce DME as a substituted energy for oil and LNG. Introduction of DME could contribute greatly to both the prevention of global warming and the formation of resource-recycling societies. In these circumstances, a safety assessment of DME is very important when DME is used on a large scale. There is a possibility that prolonged exposure in air induces autoxidation to produce explosive organic peroxides during transportation and storage of DME. Therefore, the reactivity of DME with oxygen and the mechanism of the autoxidation were investigated. Accelerating Rate Calorimetry (ARC) was used to evaluate the thermal stability of DME and DIPE, a known peroxide producers, under adiabatic and various atmospheric conditions. In ARC studies of DME under oxygen, exothermic decompositions were detected although its self-heating rate was low in comparison with DIPE. Oven storage tests were carried out and iodimetry was used to measure the concentration of peroxides produced from DME in comparison with DIPE and DEE. However, no products could be found for DME either by GC/MS or by iodimetry, while some evidence of autoxidation of both DEE and DIPE were obtained from these experiments.     

Synthesis and structure-activity relationship of diene modified analogs of<Emphasis Type="Italic"> Matsucoccus</Emphasis> sex pheromones

The biological activity of the Matsucoccus spp. sex pheromones and diene modified analogs has been tested in forests of Israel and Portugal in order to explore the structure-activity relationship of the pine bast scale pheromone/kairomone system. The response of the adult predatory bugs, Elatophilus hebraicus and E. crassicornis and of the brown lacewing, Hemerobius stigma is more selective than that of the conspecific Matsucoccus males. The removal of the terminal methyl group from the diene terminus of both pheromones 1 and 2 eliminates all kairomonal activity but retains moderate pheromonal activity. Addition of a methyl group to the diene terminus of pheromones 1 and 2 sustains full pheromonal and kairomonal activities of the Elatophilus spp. but eliminates entirely the kairomonal activity of H. stigma. Subtle designed alterations in the structure of the diene group, typical of all Matsucoccus pheromones, change the mode of the kairomonal activity markedly.     

Triterpenoid and caffeic acid derivatives in the leaves of ragweed, <Emphasis Type="Italic">Ambrosia artemisiifolia</Emphasis> L. (Asterales: Asteraceae), as feeding stimulants of <Emphasis Type="Italic">Ophraella communa</Emphasis> LeSage (Coleoptera: Chrysomelidae)

Summary. The leaf beetle Ophraella communa infests almost exclusively Ambrosia artemisiifolia in the fields of Japan, even though it normally feeds on several Asteraceous plants. A filter paper bioassay showed that the feeding of O. communa is strongly stimulated by methanolic extracts of A. artemisiifolia. The feeding stimulants for O. communa have been isolated from methanolic extracts of A. artemisiifolia. -Amyrin acetate, -amyrin acetate, 5-caffeoylquinic acid (chlorogenic acid) and 3,5-dicaffeoylquinic acid from A. artemisiifolia have been identified as feeding stimulants for O. communa. Triterpenoid derivatives (-amyrin acetate or -amyrin acetate) and caffeic acid derivatives (3, 5-dicaffoylquinic acid or 5-caffeoylquinic acid) showed feeding stimulant activity when mixed together.     

Supercritical methanol for polyethylene terephthalate depolymerization: observation using simulator

To apply PET depolymerization in supercritical methanol to commercial recycling, the benefits of supercritical methanol usage in PET depolymerization was investigated from the viewpoint of the reaction rate and energy demands. PET was depolymerized in a batch reactor at 573 K in supercritical methanol under 14.7 MPa and in vapor methanol under 0.98 MPa in our previous work. The main products of both reactions were the PET monomers of dimethyl terephthalate (DMT) and ethylene glycol (EG). The rate of PET depolymerization in supercritical methanol was faster than that of PET depolymerization in vapor methanol. This indicates supercritical fluid is beneficial in reducing reaction time without the use of a catalyst. We depicted the simple process flow of PET depolymerization in supercritical methanol and in vapor methanol, and by simulation evaluated the total heat demand of each process. In this simulation, bis-hydroxyethyl terephthalate (BHET) was used as a model component of PET. The total heat demand of PET depolymerization in supercritical methanol was 2.35 x 10(6)kJ/kmol Produced-DMT. That of PET depolymerization in vapor methanol was 2.84 x 10(6)kJ/kmol Produced-DMT. The smaller total heat demand of PET depolymerization in supercritical methanol clearly reveals the advantage of using supercritical fluid in terms of energy savings.     

Thermal decomposition of guaiacol in sub- and supercritical water and its kinetic analysis

The conversion of biomass waste into resources as a recycling process is receiving increased interest due to the perceived need for a sustainable global carbon cycle and environmental considerations. Several treatment processes are being developed. Hydrothermal treatment is one of the most effective approaches, because water at high temperatures and high pressures behaves as a reaction medium with remarkable properties. In this work, the reaction behavior of guaiacol as a biomass model compound was studied in subcritical water at 483–563 K and in supercritical water at 653–673 K using a batch reactor. Guaiacol can be considered representative of the aromatic ring structures present in lignin, a major component of woody biomass. The chemical species formed in aqueous products were identified by gas chromatography/mass spectrometry and quantified using high-performance liquid chromatography. The effect of pressure and reaction time on the conversion process of guaiacol is discussed. The results obtained indicate that this method has potential for efficient organic waste conversion.     

Determination of dioxin concentrations in fish and seafood samples using a highly sensitive reporter cell line, DR-EcoScreen cells

There is a strong need for the development of relatively rapid and low-cost bioassays for the determination of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), and dioxin-like polychlorinated biphenyls (dl-PCBs) in environmental and food samples. In this study, we applied a reporter gene assay using DR-EcoScreen cells (DR-cell assay), which is highly sensitive to dioxins, to the determination of PCDD/Fs and dl-PCBs in fish and seafood samples. The PCDD/Fs and dl-PCBs were extracted from homogenated samples (10 g) of 30 fish and shellfish, purified by clean-up procedure using a multilayered silica gel column and an alumina column, and applied to DR-cell assay. Interestingly, the bioanalytical equivalent (BEQ) values obtained from the DR-cell assay [<0.1 ∼ 5.4 pg BEQ g⁻¹ wet weight (ww)] were closely correlated with the toxicity equivalent (TEQ) values from conventional high-resolution gas chromatography/high-resolution mass spectrometry (HRGC-HRMS) analysis (r² = 0.912), and the slope of regression line was 0.913. Therefore, we multiplied the BEQ values from the DR-cell assay by a conversion coefficient (1.095, the reciprocal of 0.913) to approximate the TEQ values from the HRGC-HRMS analysis. Furthermore, we used this DR-cell assay to perform a prescreening test of PCDD/Fs and dl-PCBs in 16 fish and seafood samples purchased from a supermarket, revealing that a sample from the fatty flesh of a bluefin tuna exceeded 8 pg TEQ g⁻¹ ww (the European Union-tolerance limit). Taken together, these results suggest that the DR-cell assay might be applicable as a rapid and low-cost prescreening method to determine dioxin levels in fish and seafood samples.