Monitoring of trace amounts of heavy metals in different food and water samples by flame atomic absorption spectrophotometer after preconcentration by amine-functionalized graphene nanosheet

We are introducing graphene oxide modified with amine groups as a new solid phase for extraction of heavy metal ions including cadmium(II), copper(II), nickel(II), zinc(II), and lead(II). Effects of pH value, flow rates, type, concentration, and volume of the eluent, breakthrough volume, and the effect of potentially interfering ions were studied. Under optimized conditions, the extraction efficiency is >97 %, the limit of detections are 0.03, 0.05, 0.2, 0.1, and 1 μg L^?1 for the ions of cadmium, copper, nickel, zinc, and lead, respectively, and the adsorption capacities for these ions are 178, 142, 110, 125, and 210 mg g^?1. The amino-functionalized graphene oxide was characterized by thermogravimetric analysis, transmission electron microscopy, scanning electron microscopy, and Fourier transform infrared spectrometry. The proposed method was successfully applied in the analysis of environmental water and food samples. Good spiked recoveries over the range of 95.8–100.0 % were obtained. This work not only proposes a useful method for sample preconcentration but also reveals the great potential of modified graphene as an excellent sorbent material in analytical processes.     

Upper trapezius fatigue in carpet weaving: the impact of a repetitive task cycle

Introduction. Shoulder disorders are one of the most prevalent musculoskeletal disorders among carpet weavers. The most important cause of these disorders is muscle fatigue. The aim of the present study is to investigate the effect of carpet weaving characteristics on upper trapezius (UTr) muscle fatigue during a task cycle. Method. In this cross-sectional study, 9 women and 3 men participated. During an 80-min cycle of carpet weaving, a times-series model was applied to assess electromyography amplitude and frequency changes. Result. According to the joint analysis of electromyogram spectrum and amplitude method, the participants experienced 0% force decrease, 0.9% recovery, 18% force increase and 72% fatigue in the left UTr. Furthermore, the rates of force decrease, recovery, force increase and fatigue in the right UTr were 18%, 18%, 18% and 45%, respectively. Fatigue in the right and the left UTr was reported to be the dominant state during one carpet weaving task cycle. Conclusion. Task cycle appears to have a significant impact on UTr fatigue in participants, and UTr fatigue can be considered a serious risk factor in shoulder musculoskeletal disorders. Hence, further studies should focus on better workstations and work–rest periods during various subtasks.     

Groundwater depth and elevation interpolation by kriging methods in Mohr Basin of Fars province in Iran

Prediction of groundwater depth and elevation is important in quantitative water management especially in arid areas. There are several basins in southwest of Iran, in Zagross Mountain, in which the water wells are distributed along a narrow elliptic ring band around the region. To find the most applicable interpolation method, both of the groundwater depth and elevation are predicted by different kriging methods. It is found that the groundwater elevation and depth can be predicted by different methods. Furthermore, it is found that the methods in which the trend is eliminated predicted the groundwater elevation and depth in central part of the region is with less standard error. Furthermore, the methods with no trend elimination, predicted the groundwater depths with less error near the water wells. Dividing the area to hydro-geologically homogeneous sub-areas improved the interpolation precision.     

Design and optimization of new La1−xCexNi1−yFeyO3 (x,y = 0–0.4) nano catalysts in dry reforming of methane

The paper reports the production of syngas from dry reforming of methane (DRM) over La_1?xCe_xNi_1?yFe_yO₃ (x, y = 0–0.4) perovskites. A series of La_1?xCe_xNi_1?yFe_yO₃ were designed by central composite design (CCD) and synthesized by a sol–gel auto combustion method. Artificial neural network (ANN) approach was used to determine the relationship between preparation and operational parameters on the performance of the catalysts in the DRM process. Nickel mole fraction, lanthanum mole fraction, calcination temperature, and reaction temperature were considered as input variables, and conversion of methane was considered as the output variable. An ANN model with nine neurons in the hidden layer was the suitable in predicting conversion of methane. The genetic algorithm (GA) was subsequently used to determine the optimal preparation condition for enhancing the conversion of methane. La_0.6Ce_0.4Ni_0.99Fe_0.01O₃ catalyst, calcined at 756°C was obtained to be the most active catalyst owing to the optimal composition of nickel and lanthanum in the catalyst formulation.     

Big data and predictive analytics to optimise social and environmental performance of Islamic banks

Environment Systems and Decisions - Regardless of known as environment-friendly entities, Islamic banks indirectly impact the environment through their clients’ engagement and slow response...     

Differing Modes of Biotic Connectivity within Freshwater Ecosystem Mosaics

We describe a collection of aquatic and wetland habitats in an inland landscape, and their occurrence within a terrestrial matrix, as a “freshwater ecosystem mosaic” (FEM). Aquatic and wetland habitats in any FEM can vary widely, from permanently ponded lakes, to ephemerally ponded wetlands, to groundwater‐fed springs, to flowing rivers and streams. The terrestrial matrix can also vary, including in its influence on flows of energy, materials, and organisms among ecosystems. Biota occurring in a specific region are adapted to the unique opportunities and challenges presented by spatial and temporal patterns of habitat types inherent to each FEM. To persist in any given landscape, most species move to recolonize habitats and maintain mixtures of genetic materials. Species also connect habitats through time if they possess needed morphological, physiological, or behavioral traits to persist in a habitat through periods of unfavorable environmental conditions. By examining key spatial and temporal patterns underlying FEMs, and species‐specific adaptations to these patterns, a better understanding of the structural and functional connectivity of a landscape can be obtained. Fully including aquatic, wetland, and terrestrial habitats in FEMs facilitates adoption of the next generation of individual‐based models that integrate the principles of population, community, and ecosystem ecology.     

An Application of the T‐TEL Assessment Method to Evaluate Connectivity in a Lake‐Dominated Watershed after Drought

Lakes are landscape features that influence connectivity of mass and energy by being foci for the reception, mixing, and provision of water and material. Where lake fractions are high, they influence hydrological connectivity. This behavior was exemplified in the Baker Creek watershed in Canada's Northwest Territories during a two‐year drought in which many lake levels declined below outlet elevations. This study evaluated how lakes controlled surface runoff connectivity reestablishment following the drought using a new assessment method, T‐TEL (time scales — thresholds, excesses, losses). Analysis of daily data showed that during a summer period following the drought, connectivity occurred between 0% and 41% of the time. The size of run‐of‐the‐river lakes relative to their upstream watershed area, and the upstream lake fraction, are two factors for connectivity. These terms represent a lake's ability to control the size of storage deficits relative to rainfall, and evaporation and storage losses along pathways. The connectivity magnitude–duration curve only aligned with the watershed flow duration curve during high‐water conditions, implying lakes functioned as individuals rather than as part of a perennial watercourse during much of the study. The T‐TEL method can be used to quantify consistent metrics of hydrologic connectivity that can be used for regionalization exercises and understanding hydrologic controls on material transport.     

Modeling Connectivity of Non‐floodplain Wetlands: Insights,Approaches, and Recommendations

Representing hydrologic connectivity of non‐floodplain wetlands (NFWs) to downstream waters in process‐based models is an emerging challenge relevant to many research, regulatory, and management activities. We review four case studies that utilize process‐based models developed to simulate NFW hydrology. Models range from a simple, lumped parameter model to a highly complex, fully distributed model. Across case studies, we highlight appropriate application of each model, emphasizing spatial scale, computational demands, process representation, and model limitations. We end with a synthesis of recommended “best modeling practices” to guide model application. These recommendations include: (1) clearly articulate modeling objectives, and revisit and adjust those objectives regularly; (2) develop a conceptualization of NFW connectivity using qualitative observations, empirical data, and process‐based modeling; (3) select a model to represent NFW connectivity by balancing both modeling objectives and available resources; (4) use innovative techniques and data sources to validate and calibrate NFW connectivity simulations; and (5) clearly articulate the limits of the resulting NFW connectivity representation. Our review and synthesis of these case studies highlights modeling approaches that incorporate NFW connectivity, demonstrates tradeoffs in model selection, and ultimately provides actionable guidance for future model application and development.     

Effect of Nutrient Management Planning on Crop Yield, Nitrate Leaching and Sediment Loading in Thomas Brook Watershed

Government priorities on provincial Nutrient Management Planning (NMP) programs include improving the program effectiveness for environmental quality protection, and promoting more widespread adoption. Understanding the effect of NMP on both crop yield and key water-quality parameters in agricultural watersheds requires a comprehensive evaluation that takes into consideration important NMP attributes and location-specific farming conditions. This study applied the Soil and Water Assessment Tool (SWAT) to investigate the effects of crop and rotation sequence, tillage type, and nutrient N application rate on crop yield and the associated groundwater ${\text{NO}_{3}}^{ - } {\text{-N }}$ leaching and sediment loss. The SWAT model was applied to the Thomas Brook Watershed, located in the most intensively managed agricultural region of Nova Scotia, Canada. Cropping systems evaluated included seven fertilizer application rates and two tillage systems (i.e., conventional tillage and no-till). The analysis reflected cropping systems commonly managed by farmers in the Annapolis Valley region, including grain corn-based and potato-based cropping systems, and a vegetable-horticulture system. ANOVA models were developed and used to assess the effects of crop management choices on crop yield and two water-quality parameters (i.e., ${\text{NO}_{3}}^{ - } {\text{-N }}$ leaching and sediment loading). Results suggest that existing recommended N-fertilizer rate can be reduced by 10–25 %, for grain crop production, to significantly lower ${\text{NO}_{3}}^{ - } {\text{-N }}$ leaching (P > 0.05) while optimizing the crop yield. The analysis identified the nutrient N rates in combination with specific crops and rotation systems that can be used to manage ${\text{NO}_{3}}^{ - } {\text{-N }}$ leaching while balancing impacts on crop yields within the watershed.