Oxidative potential (OP) and mineralogy of iron ore particulate matter at the Gol-E-Gohar Mining and Industrial Facility (Iran)

Concentrations of total suspended particulate matter, particulate matter with aerodynamic diameter <2.5 μm (PM_2.5), particulate matter <10 μm (PM₁₀), and fallout dust were measured at the Iranian Gol-E-Gohar Mining and Industrial Facility. Samples were characterized in terms of mineralogy, morphology, and oxidative potential. Results show that indoor samples exceeded the 24-h PM_2.5 and PM₁₀ mass concentration limits (35 and 150 µg m^?3, respectively) set by the US National Ambient Air Quality Standards. Calcite, magnetite, tremolite, pyrite, talc, and clay minerals such as kaolinite, vermiculite, and illite are the major phases of the iron ore PM. Accessory minerals are quartz, dolomite, hematite, actinolite, biotite, albite, nimite, laumontite, diopside, and muscovite. The scanning electron microscope structure of fibrous-elongated minerals revealed individual fibers in the range of 1.5 nm to 71.65 µm in length and 0.2 nm to 3.7 µm in diameter. The presence of minerals related to respiratory diseases, such as talc, crystalline silica, and needle-shaped minerals like amphibole asbestos (tremolite and actinolite), strongly suggests the need for detailed health-based studies in the region. The particulate samples show low to medium oxidative potential per unit of mass, in relation to an urban road side control, being more reactive with ascorbate than with glutathione or urate. However, the PM oxidative potential per volume of air is exceptionally high, confirming that the workers are exposed to a considerable oxidative environment. PM released by iron ore mining and processing activities should be considered a potential health risk to the mine workers and nearby employees, and strategies to combat the issue are suggested.     

Effects of microbial inoculations and surfactant levels on biologically- and chemically-assisted phytoremediation of lead-contaminated soil by maize (Zea Mays L.)

Assisted phytoremediation has been widely used for decontamination of potentially toxic elements contaminated soils. A greenhouse experiment was conducted to evaluate the effectiveness of different microbial inoculations and surfactant levels on the phytoremediation of a Pb-polluted calcareous soil by maize. The results showed that application of surfactant increased both root and shoot dry matter yields. Microbial inoculations, however, had no significant effect on the root or shoot dry matter yield. Mean Pb uptake in maize root or shoot increased only following the application of some surfactant levels. Inoculation with microorganisms significantly increased both mean Pb concentration and uptake in maize root but not in maize shoot. Application of 4?mmol surfactant kg?1 along with inoculation with Priformospora indica was effective in increasing Pb phytostabilisation potential. While the application of 2?mmol surfactant kg^?1 along with inoculation with Pseudomonas fluorescens was effective in increasing Pb phytoextraction potential. The fact that the values of translocation efficiencies were low in all treatments, demonstrated the low capability of maize for translocation of Pb from root to shoot. Inoculation with P. fluorescens was the most effective treatment in increasing metal micronutrient uptake. Microbial inoculation and surfactant levels enhanced Pb phytoremediation mostly through phytostabilisation of this metal by maize.     

What are heavy metals? Long-standing controversy over the scientific use of the term ‘heavy metals’ – proposal of a comprehensive definition

The term ‘heavy metals’ is commonly used in the environmental literature to refer to metals and metalloids associated with environmental pollution, toxicity and adverse effects on biota. The term has been diversely defined, mostly in terms of density, relative atomic mass and atomic number. This diversity of definitions has raised questions about the nomenclature of these elements. The inclusion of the metalloid As and the nonmetal Se with heavy metals is also an important issue. Some people have called the term as meaningless, imprecise and poorly defined and have suggested abandoning the use of the term. The term itself may not be problematic but the careless and inconsistent use of terminology has led to a confusion about the meaning of the term. The use of the term may be continued but it should be defined in a more comprehensive and scientific way. Here, a more comprehensive definition of the term ‘heavy metals’ is suggested as ‘naturally occurring metals having atomic number (Z) greater than 20 and an elemental density greater than 5 g cm^?3.’ A screening of the Periodic Table according to this definition yields 51 elements to be called ‘heavy metals.’ As and Se are excluded from heavy metals.     

SWOT analysis for socio-ecological landscape variation as a precursor to the management of the mountainous Kanshi watershed,Salt Range of Pakistan

Variations in geo-environmental attributes differ strongly from those of urban anthropogenic structures. Similarly, these types of structures are self-directed and arranged and prone to abrupt process-related changes and modifications. Thus, there are many reasons why planned urbanization forms in association with disturbances in ecosystem mobility. The current research highlights these variations in the context of social–cultural assessments within the Jhelum River watershed, which strongly expresses urbanization structure development mechanisms. The climate ranges from semi-arid to subhumid subtropical and sub-mountainous climate, though the extreme temperatures may rise as high as 49.4°C in June and may drop as low as ?1.6°C in January. The rainfall is low in the southwest and gradually increases towards the northeast, whereas the Salt Range is the major topographic feature that controls climatic impacts and promotes sustainable development. Cross-disciplinary methods are adopted in this investigation to assess the social–ecological landscape system (SELS) in terms of its mobility and degree of urbanization. The Sustainable Development Goals of the 2030 Agenda recognize that human livelihoods and the management of natural resources cannot be addressed separately. Investing in the sustainability of mountain communities and ecosystem conservation and protection will provide benefits for humanity as a whole. It pertains to the commensurate development of the SELS and its response to interruptions. Thus, a reliable SWOT analysis for management approaches is introduced that may enable the development of competencies that promote and lead towards rapid improvements in the sustainability of retrograde urban infrastructure, including watersheds.     

New beach in a shallow estuarine lagoon: a model-based <Emphasis Type="Italic">E. coli</Emphasis> pollution risk assessment

A 3D hydrodynamic model has been applied to the Curonian Lagoon to study the pollution impact of E. coli on a new beach that might be opened in the lagoon. Through a field survey the E. coli inputs were measured and then used in the numerical model, and through laboratory experiments the decay rate of E. coli was established. The model has been calibrated and validated for the year 2015, and several scenarios have been studied, such as sewage system breakdown, severe weather conditions or high river loads. The model has then been run for a period of 12 years to obtain a robust statistics for the pollution on the planned beach. Results show that the decay rate of E. coli is between 0.55 days and 2.3 days and the modeled decay times are compatible with these numbers. The only scenario that would create a risk for the bathing waters of the beach is a breakdown of the sewage system on the Curonian Spit. In this case the hours (and days) over legally allowable bathing threshold were computed in order to estimate the number of days the beach could be closed. These results have been confirmed by the 12 year simulations. With an influence map analysis the two most critical sewage systems could be identified.     

Characterizations of the Photocatalytically-Oxidized Cross-Linked Chitosan-Glutaraldehyde and its Application as a Sub-Layer in the TiO2/CS-GLA Bilayer Photocatalyst System

Photocatalytically-oxidized cross-linked chitosan-glutaraldehyde (CS-GLA) was obtained via irradiation of a simple assemblage of an immobilized layer-by-layer TiO₂/CS-GLA system on a glass plate with a 45-W fluorescent lamp. The oxidation process was observed to occur only in the presence of oxygen and TiO₂ within 5 cycles (10 h) of irradiation. Characterizations studies of the oxidized cross-linked polymer involving swelling index, pH-potentiometric titration and ionic conductivity measurements, as well as CHN, FTIR, ¹³C solid-state NMR,UV–Vis DRS and photoluminescence spectroscopy analyses generally indicated that the oxidation led to the formation of carbonyl groups, partial elimination of some un-reacted amino groups and change of visual color to be more brown without altering much of the whole molecular structure of the CS-GLA. This study also indicated that the photocatalytic performance of TiO₂/oxidized CS-GLA system was higher than both TiO₂/CS-GLA system and TiO₂ single layer for the removal of phenol. Moreover, the adsorption effect was extremely negligible and the photodegradation of phenol was mainly due to the photocatalytic process.     

The effects of soil properties and temperature on the adsorption isotherms of lead on some temperate and semiarid surface soils of Iran

Sorption of metal ions by soil and clay minerals is a complex process involving different mechanisms, and controlled by different variables that can interact. The aim of this work was to study the retention mechanisms of Pb ions on different soil samples. Surface soils were sampled from Guilan and Hamadan provinces in north and northwest of Iran with temperate and semiarid climates. The adsorption isotherms of Pb on the soils have been studied at 15, 27 and 37°C. The adsorption data for different soils were fitted into Langmuir and Freundlich models. Temperate soil samples had higher clay content, cation exchange capacity, dichromate (oxidable) organic carbon, total Kjeldahl-nitrogen, biological activity, amorphous and crystalline Fe and Al, but semiarid soil samples had higher sand content, pH, equivalent calcium carbonate, available P and K. Lead adsorption data obtained from semiarid soils against those obtained from temperate soils were better fitted in both Langmuir and Freundlich models. Langmuir constants Q ₀ for Pb adsorption in semiarid soils were considerably lower than those for Pb adsorption in temperate soils. However, the binding energy (K _L) of Pb and Freundlich constant n were higher for data of semiarid soils. The effect of temperature on the Pb adsorption was positive especially in temperate soils; however, soil properties had higher effects on Pb adsorption.     

Piezocatalytic removal of water bacteria and organic compounds: a review

Environmental Chemistry Letters - In the context of climate change, freshwater shrinkage and industrialization, human diseases are increasing due to water pollution by toxic chemicals and...     

Abundance,spatial distribution,and physical characteristics of microplastics in stormwater detention ponds

Despite extensive research on microplastics (MP) in marine environments, little is known about MP abundance and transport in terrestrial systems. There is, therefore, still little understanding of the main mechanisms driving the substantial transport of MP across different environmental compartments. Storm events can transport MP beyond boundaries, such as from the land to groundwater or the ocean, as has already been discovered for organic carbon transport. Urban stormwater detention ponds are suitable environments to study the impact of stormwater on the environmental fate and transport of MP. Herein, we investigate the longitudinal and vertical distribution of MP within two detention ponds with different physical characteristics. Soil samples were collected at various locations and from multiple depths (surface and subsurface layers) for measuring MP concentrations using fluorescence microscopy. Our findings show that MP are retained more near the inlet of the ponds, and MP of larger sizes were found more abundantly near inlets than outlets. We also found that MP mass and sizes decrease from surface soil to subsurface soil. In the pond, where vegetation (grass root network) was more considerable, MP were found more evenly distributed along the depth. In terms of shape, the fragments were the most abundant MP shape.     

Comparison of a plant based natural surfactant with SDS for washing of As(Ⅴ) from Fe rich soil

This study explores the possible application of a biodegradable plant based surfactant, obtained from Sapindus mukorossi, for washing low levels of arsenic （As） from an iron （Fe） rich soil. Natural association of As（Ⅴ） with Fe（Ⅲ） makes the process difficult. Soapnut solution was compared to anionic surfactant sodium dodecyl sulfate （SDS） in down-flow and a newly introduced suction mode for soil column washing. It was observed that soapnut attained up to 86% efficiency with respect to SDS in removing As. Full factorial design of experiment revealed a very good fit of data. The suction mode generated up to 83 kPa pressure inside column whilst down-flow mode generated a much higher pressure of 214 kPa, thus making the suction mode more efficient. Micellar solubilisation was found to be responsible for As desorption from the soil and it followed 1st order kinetics. Desorption rate coefficient of suction mode was found to be in the range of 0.005 to 0.01, much higher than down-flow mode values. Analysis of the PT-IR data suggested that the soapnut solution did not interact chemically with As, offering an option for reusing the surfactant. Soapnut can be considered as a soil washing agent for removing As even from soil with high Fe content.