Combustion in porous media and its applications – A comprehensive survey

The rapid advances in technology and improved living standard of the society necessitate abundant use of fossil fuels which poses two major challenges to any nation. One is fast depletion of fossil fuel resources; the other is environmental pollution. The porous medium combustion (PMC) has proved to be one of the technically and economically feasible options to tackle the aforesaid problems to a remarkable extent. PMC has interesting advantages compared with free flame combustion due to the higher burning rates, the increased power dynamic range, the extension of the lean flammability limits, and the low emissions of pollutants. This article provides a comprehensive picture of the global scenario of research and developments in PMC and its applications that enable a researcher to decide the direction of further investigation. The works published so far in this area are reviewed, classified according to their objectives and presented in an organized manner with general conclusions. A separate section is devoted for the numerical modeling of PMC.     

高氨氮低碳废水短程硝化-反硝化脱氮过程研究

通过间歇曝气的运行方式,对高浓度氨氮低碳废水进行短程硝化-反硝化脱氮过程的研究.在生物驯化过程中考察亚硝酸盐氮的积累,并验证短程硝化即亚硝化的可行性.实验结果表明,短程硝化-反硝化过程满足高氨氮低碳废水的生物脱氮要求,亚硝化率达到98.0%以上.采用16S rRNA基因克隆文库分子生物学分析方法对系统中的硝化菌群进行分析,发现系统中主要存在将氨氧化成亚硝酸根的氨氧化菌(AOB)及亚硝酸盐还原菌.     

National culture and safe work behaviour of construction workers in Pakistan

It is widely accepted that unsafe behaviour is intrinsically linked to workplace accidents. A positive correlation exists between workers’ safe behaviour and safety climate on construction sites. Construction workers’ attitude towards safety is influenced by their perception of risk, management, safety rules and procedures. Pakistan, a developing country, is currently experiencing a strong growth in its construction activities. Unfortunately, the enforcement of safety regulations in Pakistan is not widespread. Indeed, some relevant regulations are both outdated and irrelevant to daily construction operations. This paper investigates local construction workers’ behaviour, perception and attitude toward safety, and attempts to link the research findings to the influence of national culture. A three-part interview-based questionnaire survey has identified that the majority of workers have a good degree of risk awareness and self-rated competence. Additionally, workers’ intentional behaviour was empirically explained by their attitudes towards their own and management’s safety responsibilities, as well as their perception of the risk they are generally exposed to in their workplace. The paper also reveals that workers operating in a more collective and higher uncertainty avoidance environment, are more likely to have safety awareness and beliefs, which can exhibit safer on-site behaviour.     

Measurement techniques for organizational safety causal models: Characterization and suggestions for enhancements

Through a review of literature from diverse disciplines with actual and potential application to causal modeling of organizational safety risk, this paper explores issues regarding measurement techniques in a quantitative safety analysis context. The interdependencies of modeling perspectives, constructs, and measures are indentified, leading to (a) characterization and classification of measurement techniques, (b) suggestions on the selection of appropriate measurement methods for different types of model constructs including individual-level, global, configural, and shared, and (c) discussion of the modeling implications of interactions between measurement, constructs, and causal paths. A multi-dimensional perspective is offered through combinations of different “measurement methods” and “measurement bases”. A Bayesian approach is also proposed to operationalize the multi-dimensional measurements. Examples are provided to help explain the roles of these measurements in capturing the relation between organizational factors and safety performance. This paper is a product of research which has the primary purpose of extending Probabilistic Risk Assessment (PRA) modeling frameworks to include the effects of organizational factors as the fundamental causes of accidents and incidents.     

Reuse of mining wastewater in agricultural activities in Jordan

A pilot study was completed in the Al-Abyad area near phosphate mining activity in Jordan. Six plots of 50 m² each were planted with two types of plant species (Zea mays spp. and Medicago lupulina spp.) and irrigated using three types of water (fresh groundwater, mine wastewater, and hydride water consisting of 50% fresh and 50% mine wastewater) to investigate the suitability of utilizing mine wastewater for food production in the area. Water, soil and plant sampling was completed for each plot over different time intervals and analyzed for heavy metal (Cr⁺⁶, Ni⁺², Zn⁺² and Pb⁺²) in addition to major ionic composition of the water used for irrigation. Crop yield was estimated at the end of the experiment. Plots irrigated with mine wastewater showed slightly higher heavy metals concentrations and soil salinity during the experiment period was higher for plots irrigated with mine wastewater compared to plots irrigated with fresh water, and it was uniform through the upper 45 cm of the soil profile due to the high amount of irrigation water used during the experiment. Crop yield was inversely proportional to salinity as an increase of salinity by 2-folds resulted in reducing yield by almost 50%. However, no risk of heavy metals contamination was found in plants and soil. Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

Degradation of aldrin and endosulfan in rotary drum and windrow composting

Removal efficiencies, kinetics and degradation pathways of aldrin, endosulfan α and endosulfan β in vegetable waste were evaluated during rotary drum and conventional windrow composting. The highest percentage removal of aldrin, endosulfan α and endosulfan β in rotary drum composting was 86.8, 83.3 and 85.3% respectively, whereas in windrow composting, it was 66.6%, 77.7% and 67.2% respectively. The rate constant of degradation of aldrin, endosulfan α and endosulfan β during rotary drum composting ranged from 0.410–0.778, 0.057–0.076 and 0.009–0.061 day^?1 respectively. The pathways of degradation of these pesticides in composting process were proposed. Metabolites dieldrin and 1 hydroxychlorodene formed during composting of aldrin in the vegetable waste indicated the occurrence of epoxidation reaction and oxidation of bridge carbon of aldrin containing the methylene group. Formation of chloroendic acid and chloroendic anhydride during composting of endosulfan containing vegetable waste support the occurrence of endosulfan sulfate and dehydration reaction respectively.     

Possible chemical causes of skeletal deformities in natural populations of Aphanius fasciatus collected from the Tunisian coast

This study attempt to quantify and identify skeletal deformities in natural populations of Aphanius fasciatus collected from the Tunisian coast and tends to found a possible relationship between these anomalies and several types of pollutants presents in the environment. Fish were collected from one reference area (S1: coast of Luza) and three polluted areas (S2: industrialized coast of Sfax, S3: coast of Khniss and S4: Hamdoun’Oued). Various patterns of skeletal deformities were diagnosed using double staining technics, and the levels of heavy metals (Cd, Cu and Zn), various polycyclic aromatic hydrocarbons (PAHs) and estrogenic compounds were determined in water and sediment from different sites. Spatio-temporal variation of the spinal deformities frequencies in A. fasciatus show that high incidence of spinal anomalies has been recorded in population collected from S2 in comparison to three other ones. Morphological results indicated that skeletal deformities of adult A. fasciatus were grouped into 13 categories that described abnormalities on spines, vertebrae, arcs and mandibles. A total of 1025 abnormalities were quantified. The results of chemical analysis showed that the levels of heavy metals and PAHs were significantly higher in S2 than in S1, S3 and S4. High level of estrogenic activity was observed only in S4. A possible correlation between environmental exposures to a mixture of pollutants in coastal waters in S2 and spinal deformities in A. fasciatus was suggested.     

Biodegradation Properties of Poly-ε-caprolactone,Starch and Cellulose Acetate Butyrate Composites

Blending starches with polymers such as poly-ε-caprolactone (PCL) has been used as a route to biodegradable plastics. The addition of starch has a significant effect on all physical properties including toughness, elongation at break. On blending cellulose acetate butyrate (CAB) with starch and PCL, improvements in most physical and mechanical properties were observed. This is may be due to CAB acts as a compatibilizer between PCL and starch due to the presence of both hydroxyl groups (in starch and CAB) and ester carbonyls (in PCL and CAB). The presence of different compounds affects the way in which other components degrade. For example the structure of CAB within a starch and PCL combination might make the degradation rate different to that when starch was only mixed with PCL. To check whether this was the case, three combinations of different blends were used to calculate the rate of degradation of each of them separately. These degradation rate constants were then used to predict the theoretical degradation which was checked against the experimental value for other different combinations.     

EDTA ameliorates phytoextraction of lead and plant growth by reducing morphological and biochemical injuries in Brassica napus L. under lead stress

Brassica species are very effective in remediation of heavy metal contaminated sites. Lead (Pb) as a toxic pollutant causes number of morphological and biochemical variations in the plants. Synthetic chelator such as ethylenediaminetetraacetic acid (EDTA) improves the capability of plants to uptake heavy metals from polluted soil. In this regard, the role of EDTA in phytoextraction of lead, the seedlings of Brassica napus L. were grown hydroponically. Lead levels (50 and 100 μM) were supplied alone or together with 2.5 mM EDTA in the nutrient culture. After 7 weeks of stress, plants indicated that toxicity of Pb caused negative effects on plants and significantly reduced growth, biomass, chlorophyll content, gas exchange characteristics, and antioxidant enzymes activities such as superoxide dismutase (SOD), guaiacol peroxidase (POD), ascorbate peroxidase (APX), and catalase (CAT). Exposure to Pb induced the malondialdehyde (MDA), and hydrogen peroxide (H₂O₂) generation in both shoots and roots. The addition of EDTA alone or in combination with Pb significantly improved the plant growth, biomass, gas exchange characteristics, chlorophyll content, and antioxidant enzymes activities. EDTA also caused substantial improvement in Pb accumulation in Brassica plants. It can be deduced that application of EDTA significantly lessened the adverse effects of lead toxicity. Additionally, B. napus L. exhibited greater degree of tolerance against Pb toxicity and it also accumulated significant concentration of Pb from media.     

Performance assessment of integrated energy systems for HVAC applications

In this article, energy and exergy analyses are conducted for two integrated systems which can be used in HVAC applications. These two systems are analyzed for the cases of single generation, cogeneration and trigeneration, and their performances are evaluated through energy and exergy efficiencies. The parametric studies are performed to investigate the effects of using cogeneration and extended to trigeneration on the system performance. To perform the comparisons between the systems for multiple options, the same amounts of outputs (in terms of electricity, heating, cooling) are produced for all systems. The energy analyses of systems 1 and 2 show a great benefit for moving from single generation to trigeneration, with the trigeneration efficiencies of 83.5% and 87.2%, respectively, and single generation efficiencies of 47% for both systems. However, the exergy analyses show that trigeneration may not always become more efficient than single generation, particularly for system 1, due to the fact that the trigeneration exergy efficiency is 38.7% and the corresponding single generation efficiency is 44.3%. For system 2, the trigeneration exergy efficiency is 52.7% while the single generation efficiency becomes 44.3%. Depending on the type of cogeneration or cogeneration design, the system can be more efficient.