天津市城区暴雨沥涝仿真模拟系统的研究

天津市位于黄河水系尾闾，是我国北方重要的工业和港口城市。该市历史上一直遭受洪涝灾害的威胁，加之近几年市区范围不断扩大，不透水面积增加，排水能力远远不能适应城市的发展要求，城市沥涝问题日趋严重。为了掌握天津市暴雨沥涝的规律，减轻洪涝灾害对该市的影响，作者利用二维不恒定流水动力学模型和计算机信息管理及图形技术，采用Power Station Fortran 4.0和Visual Basic5.0编程语言，在Widows98环境下开发了天津市暴雨沥涝仿真模拟系统。该系统首次实现了从城市暴雨预报、监测到城市暴雨沥涝仿真模拟的研究， 不仅能够处理实时的不均匀的降雨信息，还能处理数值预报模型的预报降雨信息。系统的信息前后处理模块用图形方式管理仿真模型的各类信息，方便用户显示、查询和修改，使系统更加完整、实用。     

Public opinion and siting solid waste landfills in Kuwait

Siting municipal solid waste landfills in Kuwait had not considered public concerns about the location of such facilities. Kuwait Municipality has disposed urban waste in abandoned sand quarries for the past 20 years in an unplanned fashion. Due to this improper siting criteria, environmental and health problems have risen from old landfills that are located in residential areas. In an effort to help responsible decision-makers in assessing public support for siting landfills a structured, yet simple, questionnaire was designed and distributed to a random sample of heads of households. Statistical techniques were employed to examine trends and relationships between the sample public responses concerning landfill siting criteria. The findings of the research indicated that a significant percentage of the responding sample did not know about the various landfill impacts and less than 50% were aware of the negative impacts of landfills on the public health and the environment. The visual appearance of the landfill scored the lowest impact in the opinion of the sample public while the most important aspect in siting a landfill appeared to be its economic consideration. The research findings also directed attention to the important role that the media could play in increasing public awareness. Results from the cross-classification analysis demonstrated the existence of differences in awareness levels according to age, nationality, martial status, education, and occupation of the responding sample. Statistically, these differences were significant at the 95% significance level, as supported by the test of the χ-square.     

Evaluation of Material Biodegradability in Real Conditions–Development of a Burial Test and an Analysis Methodology Based on Numerical Vision

This work validated a burial protocol for in situ testing and presents a robust, repeatable and time-saving technique to measure degraded areas in the sample, i.e. an image analysis method. 1440 specimens of degraded samples have been compiled in a data base. To this end, twenty samples presenting different levels of biodegradability (i.e. PHBV/HV, PLA, PCL, PCL-Starch, paper, PE, PE-Starch) were buried at 4 different locations and then disinterred at 4, 6, 9, 12, 18, and 24-month intervals. The biodegradation levels of these samples were determined by computing weight and area loss. Weight loss was measured after careful cleaning, whereas area loss was quantified using image analysis. Image analysis gives reliable information on visual pollution while only requiring a rudimentary and thus quicker cleaning of the samples.     

Investigation the effect of adding graphene oxide into diesel/higher alcohols blends on a diesel engine performance

ABSTRACT

This article aims to study the influence of the addition of graphene oxide nanoparticles (GO) to diesel/higher alcohols blends on the combustion, emission, and exergy parameters of a CI engine under various engine loads. The higher alcohols mainly n-butanol, n-heptanol, and n-octanol are blended with diesel at a volume fraction of 50%. Then, the 25 and 50 mg/L concentrations of GO are dispersed into diesel/higher alcohols blends using an ultrasonicator. The GO structures are examined using TEM, TGA, XRD and FTIR. The findings show that there is a reduction in p_max. and HRR when adding higher alcohols with diesel fuel. Regarding engine emission, there is a significant improvement in emissions formation with adding higher alcohols. The addition of GO into diesel/higher alcohols blends improves the brake thermal efficiency by 15%. Moreover, the p_max. and HRR are both enhanced by 4%. The CO, UHC and smoke formation are reduced considerably by 40%, 50 and 20%, respectively, while NO_x level is increased by 30% with adding GO. Finally, adding high percentages of n-butanol, n-heptanol, and n-octanol with diesel fuel with the presence of GO has the potential to achieve ultra-low CO, UHC, and smoke formation meanwhile keeping high thermal efficiency level.     

Mineralisation of Monuron photoinduced by Fe(III) in aqueous solution

The degradation of Monuron (3-(4-chlorophenyl)-1,1-dimethylurea) photoinduced by Fe(III) in aqueous solution has been investigated. The rate of degradation depends on the concentration of Fe(OH)2+, the most photoreactive species in terms of *OH radical formation. These *OH radicals are able to degrade Monuron until total mineralisation. The primordial role of the speciation of Fe(III)-hydroxy complex in aqueous solution, for the efficiency of the elimination of pollutant, was shown and explained in detail. The formation of Fe(II) in the irradiated solution was monitored and correlated with the total organic carbon evolution. Degradation photoproducts were identified and a mechanism of degradation is proposed.     

The ecological relevance of current approaches for environmental protection from exposure to ionising radiation

This paper discusses the current approaches to environmental protection from ionising radiation from an ecological perspective, highlighting the need to understand fully what we are trying to protect. Ecologically relevant endpoints for environmental protection are discussed along with the need to integrate protection from ionising radiation with the approaches adopted for non-radioactive contaminants. A possible integrated assessment approach is outlined.     

Seasonal variations of aerosol residence time in the lower atmospheric boundary layer

During a one year period, from Jan. 2002 up to Dec. 2002, approximately 130 air samples were analyzed to determine the atmospheric air activity concentrations of short- and long-lived (222Rn) decay products 214Pb and 210Pb. The samples were taken by using a single-filter technique and gamma-spectrometry was applied to determine the activity concentrations. A seasonal fluctuation in the concentration of 214Pb and 210Pb in surface air was observed. The activity concentrations of both radionuclides were observed to be relatively higher during the winter/autumn season than in spring/summer season. The mean activity concentration of 214Pb and 210Pb within the whole year was found to be 1.4+/-0.27 Bq m(-3) and 1.2+/-0.15 mBq m(-3), respectively. Different 210Pb:214Pb activity ratios during the year varied between 1.78 x 10(-4) and 1.6 x 10(-3) with a mean value of 8.9 x 10(-4) +/- 7.6 x 10(-5). From the ratio between the activity concentrations of the radon decay products 214Pb and 210Pb a mean residence time (MRT) of aerosol particles in the atmosphere of about 10.5+/-0.91 d could be estimated. The seasonal variation pattern shows relatively higher values of MRT in spring/summer season than in winter/autumn season. The MRT data together with relative humidity (RH), air temperature (T) and wind speed (WS), were used for a comprehensive regression analysis of its seasonal variation in the atmospheric air.     

Modeling flow and nitrate fate at catchment scale in Brittany (France)

In the intensive pig-farming (Sus scrofa) area of Brittany (western France), many surface and subsurface water resources are contaminated by nitrate (NO3) with concentrations that chronically exceed the European Community 50 mg L(-1) drinking standard. To ensure sustainable water supply, the fate of NO3 must be considered in both surface water and ground water. The fate of N was investigated in a Britain catchment, the Co?t-Dan watershed, with an integrated management tool: the hydrological SWAT model coupled with the ground water model MODFLOW, and its companion contaminant and solute transport model MT3DMS. The model was validated with respect to water quantity during a 6-yr period and for the NO3 concentration during a 44-mo period, at two gauging stations in the catchment. The coupled models reproduced accurately the measurements. At the basin outlet, the Nash-Sutcliffe coefficients were 0.88 for monthly flow for the entire period and 0.87 for monthly N load. Alternative scenarios were simulated and showed potential benefits of decreasing manure application from 210 to 170 kg N ha(-1) as required by the European Commission Nitrates Directive.     

Investigation of appropriate initial composition and aeration method for co-composting of yard waste and market wastes

The purpose of this research was to shorten the composting period by speeding up the composting process and to obtain good quality compost that can be used in agriculture. In order to accomplish the acceleration of the process, different mixtures of feedstock were loaded to the composting containers to observe the effect of initial composition on the quality of the compost and the rate of composting. The first feedstock prepared was composed of grass, leaves and market waste whereas the second feedstock composed only of leaves and market wastes. Composting process was accomplished by applying different composting methods such as composting without manual stirring, with manual stirring, with aeration by air, with aeration by oxygen, with manual stirring and aeration by air and finally by with manual stirring and aeration by oxygen to achieve the purpose of the research. Aeration was found as a primary requirement for the acceleration of composting because it was observed that when the aeration was not applied the conversion of nutrients was very low. The high conversion efficiency of the nutrients in the feedstock with market and yard wastes-without grass-resulted in higher quality end product. The organic content of the composted yard and market wastes were monitored and the best operational parameters and methods were identified. Parameters such as temperature, moisture, pH and end-product metal contents were also monitored in the study. and the experiments were run in duplicates. Corrected C/N, (C/N)t/(C/N)initial, were used in the calculations which provided objectivity in comparison of the compost quality with respect to nutritional components. The C/N change was found to be higher in the container that was manually stirred and aerated with oxygen but with regard to the economic feasibility of the system aeration with air was preferred. Compost quality that was achieved in the study was compared to the standards of different countries with respect to the amount of metal contents in the end-product. The applicability of the end-product in agriculture depends on the level of contaminants in the compost, especially metals that have to be present only in trace amounts.     

Differences between blood and liver aromatic DNA adduct formation

Aromatic DNA adducts in the livers and blood of grey mullet (Mugil sp.) have been monitored between 1993 and 1996 by the isolation of DNA and the postlabeling of the DNA adducts with 32P. The grey mullet were sampled from three well-characterised harbours, two in the northeastern Mediterranean and one in the northeastern Black Sea near Trabzon close to a site of aquaculture. One of the northeastern Mediterranean harbours was highly polluted with polynuclear aromatic hydrocarbons (PAHs) and was rich in inorganic nutrients. Larger grey mullet lived in this harbour than the other harbours and their livers possessed approximately 100 aromatic DNA adducts per 10(8) nucleotides. The livers from grey mullet in the other two harbours possessed < or = 25 aromatic DNA adducts per 10(8) nucleotides but these concentrations depended on a variety of factors. Blood cell being regenerated more rapidly than liver cells, it is found that generally the ratio of DNA adduct concentrations in piscine liver and blood will increase with the pollution of the surrounding marine environment. Fishes are acceptable models for the metabolism of xenobiotics and the associated formation of harmful aromatic DNA adducts in organisms.