Performance of Cow Dung Reinforced Biodegradable Poly(Lactic Acid) Biocomposites for Structural Applications

In this work, performance of cow dung (CD) reinforced poly(lactic acid) (PLA) biocomposites was investigated for the potential use in load bearing application. CD of average 4 mm size was blended with PLA at different CD ratios (0–50 wt%) and their effects on the biocomposite properties were studied. The results showed an improvement in the flexural properties, while the tensile and impact strength dropped by 20 and 28% with the addition of 50% CD. The decline in the tensile and impact strength was due to micro-cracking and voids formation at higher CD content. Also, the incorporation of CD slightly decreased the thermal stability of the biocomposite. However, dynamic mechanical properties of the biocomposites generally improved. SEM analysis of tensile and impact fractured surfaces indicated that the CD had a reasonable adhesion with matrix. Moreover, the SEM micrographs of soil burial studies showed an accelerated degradation of higher CD wt% biocomposites.     

A Solvent-Free Approach for Production of Films from Pectin and Fungal Biomass

Self-binding ability of the pectin molecules was used to produce pectin films using the compression molding technique, as an alternative method to the high energy-demanding and solvent-using casting technique. Moreover, incorporation of fungal biomass and its effects on the properties of the films was studied. Pectin powder plasticized with 30% glycerol was subjected to heat compression molding (120 °C, 1.33 MPa, 10 min) yielding pectin films with tensile strength and elongation at break of 15.7 MPa and 5.5%, respectively. The filamentous fungus Rhizopus oryzae was cultivated using the water-soluble nutrients obtained from citrus waste and yielded a biomass containing 31% proteins and 20% lipids. Comparatively, the same strain was cultivated in a semi-synthetic medium resulting in a biomass with higher protein (60%) and lower lipid content (10%). SEM images showed addition of biomass yielded films with less debris compared to the pectin films. Incorporation of the low protein content biomass up to 15% did not significantly reduce the mechanical strength of the pectin films. In contrast, addition of protein-rich biomass (up to 20%) enhanced the tensile strength of the films (16.1–19.3 MPa). Lastly, the fungal biomass reduced the water vapor permeability of the pectin films.     

Modeling of agricultural drought risk pattern using Markov chain and GIS in the western part of Bangladesh

The aim of the study is to assess the agricultural drought risk condition in the context of global climate change in the western part of Bangladesh that covers about 45% area of the country for the period of 1960–2011. Drought Index (DI) and Drought Hazard Index (DHI) have been calculated by Markov Chain analysis and that of Drought Vulnerability Index (DVI) from socioeconomic and physical indicators. The DI values show that the northern part in general is more drought-prone, having less crops prospect, whereas the southern part is less drought-prone with high crop potentiality. The probability of extreme drought occurrence increases in recent decades in some parts as a result the drought events become more frequent in the areas. The DHI ranges from 15 to 32, and northern part suffers from more extreme drought hazards than that of southern part. DVI also indicates that northern part is exposed to high to very high drought vulnerability as higher percentage of illiterate people are involved in agricultural practices and high percentage of irrigation to cultivable land, but southern part exposed to moderate to low vulnerability because of low values of vulnerability indicators. Finally, agricultural drought exists at high risk condition in northern part and low in southern parts and 21.63, 26.54 and 29.68% of the area poses very high, high and moderate risk, respectively. So, immediate adaptation measures are needed keeping in mind climate features like rainfall and temperature variability, drought risk and risk ranking to make viable adaptation measures.     

Making spatial development scenario for south of Bushehr province,Iran, based on strategic foresight

In recent years, the science of foresight has been entered into planning activities by urban and regional planners and this science has impacted on planning activities. This study discusses spatial development in the south of Bushehr province using the foresight approach. The general aim of this research is to compile scenarios for the development of the mentioned study area which comprises the southern part of Bushehr province including four counties of Dayyer, Jam, Kangan and Asaluyeh. The main reason for selecting this region is their direct impressibility by major changes in the country’s oil and gas industry. This research has extremely made use of the Delphi and cross-impact analysis methods to develop foresight scenarios. Using the Delphi method, 30 initial factors were identified in the economic, political-security, linkages, science and technology, manufacturing, natural, social, infrastructural and residential issues and then the cross-impact matrix was used to investigate the impact of factors on each other. In the next step, the ranking of direct and indirect factors was determined by Micmac software and on this basis, the final refining in the selection of drivers was done. In the final stage, axes of future scenarios were presented and then the future scenarios were drawn. Results of this research indicate that two main drivers namely Iran’s international relations and energy resources are the main axes of scenarios. These two drivers have more uncertainty and higher importance than other factors and the results in four scenarios showing the possibility of each situation’s occurrence.     

Synthesis,Characterization and Environmental Applications of a New Bio-Composite Gelatin-Zr(IV) Phosphate

Gelatin-Zr(IV) phosphate composite (GT/ZPC) was synthesized by sol–gel method. Different techniques viz. Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray powdered diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used for the characterisation of GT/ZPC composite ion exchanger. The ion exchange capacity (IEC) of GT/ZPC was observed to be better (1.04 meq g^?1) than its inorganic counterpart (0.64 meq g^?1). The pH studies revealed the monofunctional nature of GT/ZPC with one inflection point. The distribution studies showed that the GT/ZPC was highly selective for Cd²⁺ as compare to other metal ions. The environmental applicability of ion exchanger has been analysed for binary separations of metal ions using column method. Cd²⁺ was effectively removed from synthetic mixture of metal ions (Zn²⁺, Pb²⁺, Ni²⁺, Co²⁺ and Cu²⁺).     

The effects of using reprocessable material on the durability and mechanical properties of landfill leachate collection HDPE pipes

This paper investigated the durability and mechanical properties of landfill leachate collection HDPE pipes which had been made of different weight percent amounts of virgin and reprocessable HDPE compounds (VC and RC). Durability is reported base on the chemical properties, obtained through oxidative induction time (OIT) and melt flow index (MFI) measurements, at the temperature of 50 °C and over a period of 12 months immersion in a synthetic leachate. Mechanical properties are also described according to tensile and pressure tests which had been conducted on the pipes samples. All of the factors were examined had been affected by the addition of RC, but for the special combination the antioxidant depletion was significantly affected by the experimental aging condition and no important changes had been observed in the other pipe properties. The results from OIT tests indicate that the rate of antioxidant depletion is reduced by an increase in the weight percent amounts of RC, during the experimental aging condition. This reduction is probably attributed to the extraction of antioxidants from RC in their recovery process. Finally, although these results are related to the particular HDPE compound, antioxidant formulation and condition examined, but it can be said that the use of clean own reprocessable material for the production of landfill leachate pipes shall be permitted without limitations.     

Assessing stress response of Stylophora pistillata towards oil and phosphate pollution in the Gulf of Aqaba,using molecular and biochemical markers

Crude oil (from oil terminal) and raw phosphate (from phosphate port) pollution are responsible for the lowered health conditions of coral reefs at their vicinity in the Jordanian coast of the Gulf of Aqaba. Both in situ incubations and ex situ laboratory exposure experiments were used to study the effects of those pollutants on corals, by using molecular and biochemical biomarkers in the coral Stylophora pistillata. For ex situ part of the experiment, crude oil and raw phosphate were added to a final concentration of 500?ppm for both pollutants. The DNA damage was assessed by Comet assay, while biochemical stress markers were reassessed by lipid peroxidation (LPO) test. Although the corals looked healthy from outside, the use of stress biomarkers indicated that they are under high pressure at the cellular level. The corals incubated with oil and phosphate had more DNA damage and LPO in comparison with the control samples. The results obtained suggest that the use of stress biomarkers can be used as important prognostic tools for examining the sub-lethal stress on corals before their death.     

Toward a robust analytical method for separating trace levels of nano-materials in natural waters: cloud point extraction of nano-copper(II) oxide

Cloud point extraction (CPE) factors, namely Triton X-114 (TX-114) concentration, pH, ionic strength, incubation time, and temperature, were optimized for the separation of nano-sized copper(II) oxide (nCuO) in aqueous matrices. The kinetics of phase transfer was studied using UV–visible spectroscopy. From the highest separation rate, the most favorable conditions were observed with 0.2 %?w/v of TX-114, pH?=?9.0, ionic strength of 10 mM NaCl, and incubation at 40 °C for 60 min, yielding an extraction efficiency of 89.2?±?3.9 % and a preconcentration factor of 86. The aggregate size distribution confirmed the formation of very large nCuO–micelle assemblies (11.9 μm) under these conditions. The surface charge of nCuO was also diminished effectively. An extraction efficiency of 91 % was achieved with a mixture of TX-100 and TX-114 containing 30 wt.% of TX-100. Natural organic and particulate matters, represented by humic acid (30 mg/L) and micron-sized silica particles (50 mg/L), respectively, did not significantly reduce the CPE efficiency (<10 %). The recovery of copper(II) ions (20 mg/L) in the presence of humic acid was low (3–10 %). The spiked natural water samples were analyzed either directly or after CPE by inductively coupled plasma mass spectrometry following acid digestion/microwave irradiation. The results indicated the influence of matrix effects and their reduction by CPE. A delay between spiking nCuO and CPE may also influence the recovery of nCuO due to aggregation and dissolution. A detection limit of 0.04 μg Cu/L was achieved for nCuO.